Eizo FlexScan L885 User manual

User’s Manual
Color LCD Monitor

English
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide b
y
the information in a WARNING ma
y
result in serious in
j
ur
y
and
can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury
and/or property or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2003 EIZO NANAO CORPORATION All rights reserved. No part of this manual
may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO
CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or
information confidential unless prior arrangements are made pursuant to EIZO NANAO
CORPORATION's receipt of said information. Although every effort has been made to ensure
that this manual provides up-to-date information, please note that EIZO monitor specifications
are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards
Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO
CORPORATION.
As an ENERGY STAR®Partner, EIZO NANAO CORPORATION has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.
2

English
TABLE OF CONTENTS
PRECAUTIONS ................................................................................4
1. INTRODUCTION .....................................................................................9
1-1. Features ........................................................................................................9
1-2. Package Contents..........................................................................................9
1-3. Controls & Connectors ..............................................................................10
2. CABLE CONNECTION .........................................................................12
2-1. Before Connecting ......................................................................................12
2-2. Connecting the Signal Cable .......................................................................13
2-3. Connecting Two PCs to the Monitor ..........................................................16
3. ScreenManager....................................................................................18
3-1. How to use the ScreenManager ..................................................................18
3-2. ScreenManager Adjustments and Settings...................................................19
3-3. FineContrast ...............................................................................................20
3-4. Useful Functions .........................................................................................21
4. ADJUSTMENT ......................................................................................23
4-1. Screen Adjustment ......................................................................................23
4-2. Displaying Low Resolutions .......................................................................27
4-3. Color Adjustment .......................................................................................29
4-4. Power-save Setup ........................................................................................31
5. ATTACHING AN ARM ...........................................................................33
6.TROUBLESHOOTING........................................................................... 35
7. CLEANING............................................................................................39
8. SPECIFICATIONS.................................................................................40
9. GLOSSARY........................................................................................... 43
APPENDIX ...................................................................................................i
TABLE OF CONTENTS 3

English
PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region to which it was originally shipped,
the product may not perform as stated in the specifications.
• To ensure personal safety and proper maintenance, please read this section and the
caution statements on the unit (refer to the figure below).
[Location of the Caution Statements]
WARNING
If the unit begins to emit smoke, smells like something is burning, or
makes strange noises, disconnect all power connections immediately
and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or
equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or
burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers
may result in fire, electric shock, or equipment damage.
4PRECAUTIONS

English
WARNING
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately.
Have the unit checked by a qualified service engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or
equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for
advice. Do not continue using a damaged unit. Using a damaged unit may
result in fire or electric shock.
OK
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
*Do not place outdoors.
*Do not
p
lace in the trans
p
ortation s
y
stem (shi
p
, aircraft, trains, automobiles,
etc.)
*Do not place in a dusty or humid environment.
*Do not place in a location where the steam comes directly on the screen.
*Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away
from babies and children.
Use the enclosed power cord and connect to the standard power outlet
of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
OK
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
PRECAUTIONS
5

English
WARNING
Use the correct voltage.
*The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User’s Manual may cause fire, electric
shock, or equipment damage.
*Do not overload your power circuit, as this may result in fire or electric
shock.
Handle the power cord with care.
*Do not place the cord underneath the unit or other heavy objects.
*Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord
may result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the
arm stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in
in
j
ur
y
or e
q
ui
p
ment dama
g
e. When the unit is dro
pp
ed,
p
lease ask
y
our dealer
for advice. Do not continue usin
g
a dama
g
ed unit. Usin
g
a dama
g
ed unit ma
y
result in fire or electric shock. When reattaching the tilt stand, please use the
same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes
or mouth.
If any part of the skin or body comes in direct contact with the panel, please
wash thoroughly. If some physical symptoms result, please consult your
doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
6PRECAUTIONS

English
CAUTION
Handle with care when carrying the unit.
Disconnect the
p
ower cord and cables when movin
g
the unit. Movin
g
the unit
with the cord attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both
hands ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
OK
Do not block the ventilation slots on the cabinet.
*Do not place any objects on the ventilation slots.
*Do not install the unit in a closed space.
*Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire,
electric shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a
problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric
shock.
If you plan to leave the unit unused for an extended period, disconnect
the power cord from the wall socket after turning off the power switch
for the safety and the power conservation.
PRECAUTIONS 7

English
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain
the stable luminosity, use of a monitor in lower brightness is recommended.
The screen may have defective pixels. These pixels may appear as slightly light
or dark area on the screen. This is due to the characteristics of the panel itself,
and not the product.
The backli
g
ht of the LCD
p
anel has a fixed life s
p
an. When the screen becomes
dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in
damage to the screen. There will be prints left on the screen if the pressed
image is dark or black. If pressure is repeatedly applied to the screen, it may
deteriorate or damage your LCD panel. Leave the screen white to decrease the
prints.
Do not scratch or
p
ress on the
p
anel with an
y
shar
p
ob
j
ects, such as a
p
encil or
pen as this may result in damage to the panel. Do not attempt to brush with
tissues as this may scratch the LCD panel.
8PRECAUTIONS

English
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
• Dual inputs compliant (DVI-I and D-Sub mini 15 pin connecters)
• DVI (p. 43) Digital input (TMDS (p. 44)) compliant
• [Horizontal scanning frequency] Analog: 24 - 94 kHz
Digital: 31 - 76 kHz
[Vertical scanning frequency] Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution] 1600 dots x 1200 lines
• Frame Synchronous mode supported (59 - 61 Hz)
• Smoothing function incorporated for the adjustment of an enlarged image. (p.27)
• FineContrast modes, to select the most suitable mode for screen display (p.20)
• The utility software “ScreenManager Pro for LCD” (for Windows) which can control
the monitor from a PC with a mouse or keyboard is included (refer to the EIZO LCD
Utility Disk).
• The height adjustable stand incorporated
• Ultra slim bezel incorporated
• The Portrait/Landscape display capability
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or
damaged.
•LCD Monitor •EIZO LCD Utility Disk
•Power Cord •User’s Manual
•Signal Cable (FD-C39) •ScreenManager Quick Reference
•Signal Cable (MD-C87) •LIMITED WARRANTY
•EIZO USB Cable (MD-C93)
NOTE
• Please retain the packing materials for future transference.
1. INTRODUCTION 9

English
1-3. Controls & Connectors
Front
ENTERAUTO
SIGNAL
1 - 2
(4)
(2)
(5) (6)
(3) (7) (8)
(1)
(1) ScreenManager®
(2) Main Power Switch
(3) Input Signal Selection Button
(4) Auto Adjustment Button
(5) Enter Button
(6) Control Buttons*1 (Left, Down, Up, Right) *2
(7) Power Button
(8) Power Indicator*3
Blue Operation
Yellow / Flashing
yellow (2 times for
each)
Power saving
Flashing yellow
slowly
Power is off (Main power is on)
Off Power off
*1 Directly pressing the left or right button allows you to select a FineContrast mode, see
page 20. The ScreenManager Main Menu and the FineContrast Menu cannot be
displayed at the same time.
*2 These buttons are changed to Up, Left, Right, Down in case of selecting “Portrait” for
<Orientation> of ScreenManager <Others> (p.19).
*3 Blue lighting, when the screen is displayed (Operation mode), is made to non-light,
see page 19. Regarding the power indicator for the “Off Timer”, see page 21.
Control Panel
FineContrast Menu
10 1. INTRODUCTION

English
Rear
(9) (11)(10)
(12)(13) (14) (15)
(9) Height Adjustable Stand (Detachable)* 4
(10) Power Terminal Covers for the Optional Peripheral
(11) Security Lock Slot*5
(12) DVI-I Input Connector (SIGNAL 1)
(13) D-Sub mini 15 pin Input Connector (SIGNAL 2)
(14) USB Port (1 Upstream)
(15) Power Connector
*4 The LCD monitor has the capability of the Portrait/Landscape display. (The panel
pivots in the clockwise direction 90°.) For the Portrait display, use the software for
the portrait.
The LCD monitor can be used with an optional arm stand by removing the stand.
(see page 33)
*5 Allows for connection of a security cable. This lock supports Kensington’s
MicroSaver security system. For further information, please consult’
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: [phone], x3348, Intl: 650-572-2700, x3348
Fax: [phone]
http://www.kensington.com
Bottom
1. INTRODUCTION
11

English
2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings (resolution
p. 44) and frequency) in accordance with the charts below.
NOTE
• When your computer and display support VESA DDC, the suitable resolution and
the refresh rate are set by just plugging your display into the computer without any
manual settings.
Analog Input
Resolution Frequency Dot Clock Remarks
640 ×480 67 Hz Apple Macintosh
640 ×480 ~ 85 Hz VGA, VESA
720 ×400 70 Hz VGA TEXT
800 ×600 ~ 85 Hz VESA
832 ×624 75 Hz Apple Macintosh
1024 ×768 ~ 85 Hz VESA
1152 ×864 75 Hz VESA
1152 ×870 75 Hz Apple Macintosh
1280 ×960 60 Hz VESA
1280 ×960 75 Hz Apple Macintosh
1280 ×1024 ~ 85 Hz VESA
1600 ×1200 ~ 75 Hz
202.5 MHz
(Max.)
VESA
Digital Input
Only the following resolutions with frequency can be displayed on this model.
Resolution Frequency Dot Clock Remarks
640 ×480 60Hz VGA
720 ×400 70Hz VGA TEXT
720 ×480 60 Hz VESA Safe Mode
800 ×600 60Hz VESA
1024 ×768 60Hz VESA
1280 ×1024 60Hz VESA
1600 ×1200 60Hz
162 MHz
(Max.)
VESA
12 2. CABLE CONNECTION

English
2. CABLE CONNECTION 13
2-2. Connecting the Signal Cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector PC
Signal Cable (MD-C87
enclosed) Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / D-Sub mini
15 pin
• Standard graphics card
• Power Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
Signal Cable (MD-C87
enclosed) + Adapter*
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / D-Sub mini
15 pin
• Macintosh
*Macintosh Adapter (Optional)
Digital Input
Signal Cable Connector PC
Signal Cable (FD-C39
enclosed)
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
• Digital graphics board
• Power Mac G4 (DVI)
NOTE
• The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector)
Power Cord

English
2. Plug the power cord into the power connector on the rear of the
monitor.
3. Lead the power cord and signal cable into the cable holder at rear of
the monitor.
NOTE
• When housing the cables into the cable holder, lead them to the cable entrance
side and pinch the projection to open the cable entrance.
• The cables are recommended to lead with slight sag for the smooth motion of
the stand and the Portrait/Landscape display.
4. Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
Cable Holder
Cable Entrance
Projection
14 2. CABLE CONNECTION

English
WARNING
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock. Not doing so
may cause in fire or electric shock.
5. Turn on the monitor’s Power Button and then turn on the PC’s
power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “TROUBLESHOOTING” (p.35) for
advice.
Whenever finished, turn off the PC and the monitor.
NOTE
• When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
• Adjust brightness of the screen depending on the brightness of your environment.
• Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
6. When using the software, ScreenManager Pro for LCD (for
Windows), connect the upstream port of the monitor to the
downstream port of the USB compliant PC or another hub with the
USB cable.
After connecting the USB cable, the USB function can be set up automatically. For
further details about the “ScreenManager Pro for LCD”, refer to the readme.txt in
the CD-ROM.
2. CABLE CONNECTION
15

English
16 2. CABLE CONNECTION
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.
Connecting Examples
NOTE
• When using FD-C16, plug the D-Sub mini 15 pin connector to the computer and
DVI-I connector to the monitor. Wrong connection causes no picture problem.
Selecting the Active Input
The Input Signal Selection Button on the control panel can be used to select either
SIGNAL 1 or SIGNAL 2 as the active input at any time. Every time the button is
pressed, the input changes. When switching the signal, the kind of the input signal
(Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of
the screen.
ENTER
AUTO
SIGNAL
1 - 2
PC 1 PC 2
(Ex.1) Digital DVI Signal Cable
(FD-C39 enclosed)
Signal Cable
(MD-C87 enclosed)
D-Sub
mini
15 pin
Analog
(Ex.2) Analog D-Sub
mini 15
pin
Signal Cable
(FD-C16 optional)
Signal Cable
(MD-C87 enclosed)
D-Sub
mini
15 pin
Analog
DVI-I Input Connector
(SIGNAL 1)
Input Signal Selection Button
D-Sub 15 pin mini
Input Connector
(
SIGNAL 2
)

English
The Priority Input Signal
This function is used to select which PC will have priority to control the monitor when
utilizing two PCs. The monitor constantly checks the input signals and switches
automatically in accordance with the “Input Priority” setting (see table below). Once a
priority is set, whenever a change of signal is detected at the selected input, the monitor
will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically
detects and displays that signal.
Priority setting Performance
1
(SIGNAL 1 – DVI-I Input
Connector)
If signals from both inputs are present, the monitor gives
preference to Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input
was Signal 2.
2
(SIGNAL 2 – D-Sub mini
15 pin Input Connector)
If signals from both inputs are present, the monitor gives
preference to Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active input
was Signal 1.
Manual
The monitor will not detect signals automatically in this mode.
Select the active input by pressing the Input Signal Selection
Button on the monitor’s control panel.
NOTE
• When the “1” or “2” is selected, the power saving mode of the monitor activates only
if both PCs are in power saving mode.
2. CABLE CONNECTION 17

English
3. ScreenManager
3-1. How to use the ScreenManager
ScreenManager allows you to adjust screen performance though the main menu and
select a FineContrast mode easily.
ENTERAUTO
SIGNAL
1 - 2
NOTE
• Main Menu and FineContrast Menu cannot be activated at the same time.
1. Entering the ScreenManager
Press the Enter Button once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
(1) Select the desired sub menu icon using the Control buttons and press the Enter
Button. The sub menu appears.
(2) Use the Control buttons to select the desired setting icon and press the Enter
Button. The setting menu appears.
(3) Use the Control buttons to make all required adjustments and press the Enter
Button to save the settings.
3. Exiting the ScreenManager
(1) To return to the main menu, select the <Return> icon or press the down button
twice, followed by the Enter Button.
(2) To exit the ScreenManager, select the <Exit> icon or press the down button
twice, followed by the Enter Button.
NOTE
• Double clicking the Enter Button at any time also exits the ScreenManager menu.
FineContrast Menu
Directly pressing the left or right button allows you to select the best suited
mode for screen display from 6 FineContrast modes; Custom, Movie, Picture,
Text, External and sRGB. To exit the menu, press the Enter Button. (p. 20)
Auto Adjustment
Button Enter Button
Control Buttons
Left, Down, Up, Right
Main Menu
[Ex.] Custom
FineContrast Menu
18 3. ScreenManager

English
3-2. ScreenManager Adjustments and Settings.
The following table shows all the ScreenManager’s adjustment and setting menus.
“*” indicates adjustments of analog input only and “**” indicates digital input only.
Main menu Sub menu Reference
Clock *
Phase *
Position
Resolution
Range Adjustment *
Smoothing
Screen
Signal Filter *
4-1. Screen Adjustment (p.23)
Brightness
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Color(Custom)*1
Reset
4-3. Color Adjustment (p.29)
DVI DMPM **
VESA DPMS *
PowerManager
EIZO MPMS *
4-4. Power-save Setup (p.31)
Screen Size
Border Intensity
4-2. Displaying Low Resolutions (p.27)
Input Priority Select the priority input signal. (p.17)
Off Timer Set the monitor’s off timer to on or off. (p.21)
Beep Set the monitor’s beeper to on or off. (p.41)
Menu Size Change the size of the menu.
Menu Position Adjust the menu position
Menu Off Timer Set the menu displaying time.*2
Menu
Settings
Translucent Set the transparency of the background.
Orientation Change the orientation of the
ScreenManager for monitor’s portrait position.
Power Indicator Make non-light for blue lighting when the
screen is displayed. (p.22)
Others
Reset Return to the factory default settings. (p.41)
Information Information Review the ScreenManager’s settings, model
name, serial number and usage time
*3
.
Language English, German, French,
Spanish, Italian, Swedish
and Japanese
Select the ScreenManager’s language.
*1The adjustable functions depend on the selected FineContrast mode. The above table
shows the sub menus when the ‘custom’ mode is selected (see page 29).
*2The displaying time of the FineContrast Menu cannot be changed.
*3Due to the inspection on the factory, the usage time may not be “0 hour” at shipping.
3. ScreenManager 19

English
3-3. FineContrast
This function allows you to select the best suited mode for screen display.
To select the Mode
Directly pressing the left or right button allows you to select the best suited mode for
screen display from 6 FineContrast modes; Custom, Movie, Picture, Text, External and
sRGB. Color settings each mode can be adjusted by using the <Color> menu of the
ScreenManager.
NOTE
• When the main menu of ScreenManager is displayed on the screen, the
FineContrast Menu cannot be activated.
Exit
Press the Enter Button to exit the menu.
ENTER
AUTO
SIGNAL
1 - 2
FineContrast Mode
Selectable FineContrast modes are as follows.
Custom To adjust the color settings according to your preference
Movie Animated images
Picture Photo or picture image
Text Text on word processor or spreadsheet software
External Color reproduction by setting the values of color coordinate and
gamma with using the “ScreenManager Pro for LCD (for
Windows)” (Refer to the EIZO LCD Utility Disk.)
sRGB To display the screen images based on those original colors (ex. over
the Internet)
Color Adjustment of the Mode Settings
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the
FineContrast Menu. Select the desired function icon with the Up/Down control buttons
and adjust with the Left/Right buttons. (Setting(s) of <Temperature> and/or <Gamma>
is defined as standard default in some modes. (p.29))
Detailed Adjustments
The detailed color settings of each mode can be adjusted by using the <Color> menu of
the ScreenManager. (p.29)
FineContrast Menu
[Ex.] Custom
Enter Button
Control Buttons
Left, Right Setting status of
Brightness, Temperature
and Gamma
Current Mode
20 3. ScreenManager