Eizo FlexScan SX3031W User manual

Important
Please read PRECAUTIONS, this User’s
Manual and Setup Manual (separate volume)
carefully to familiarize yourself with safe and
effective usage.
Please retain this manual for future reference.
CONTENTS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Display Mode Selection
2-3 Color Adjustment
2-4 Off Timer/Power Saving Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Settings
2-7 Locking Buttons
2-8 Setting Adjustment Menu Display
2-9 Setting Orientation
2-10 Viewing Information/Setting Language
2-11 Beeper Setting
2-12 Selecting Input Signal
2-13 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Peripheral USB Devices
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm
5-2 Cleaning
5-3 Specications
5-4 Glossary
How to Setup
Please read the Setup Manual (separate volume)
The latest User’s Manual is available for
download from our site:
http://www.eizo.com

Copyright© 2007-2010 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZONANAOCORPORATIONisundernoobligationtoholdanysubmittedmaterialorinformationcondential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitorspecicationsaresubjecttochangewithoutnotice.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
VESA is a registered trademark of Video Electronics Standards Association.
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries.
EIZO, EIZO Logo, FlexScan, i•Sound and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and
other countries.
All other trademarks are the properties of their respective owners.
Productspecicationmayvarywithsalesareas.
Conrmthespecicationinthemanualwritteninlanguageoftheregionofpurchase.

1
Notice for this monitor
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.
Percentage of effective pixels: 99.9994% or higher.
ThebacklightoftheLCDpanelhasaxedlifespan.Whenthescreenbecomesdarkorbeginstoicker,pleasecontact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
Whenthescreenimageischangedafterdisplayingthesameimageforextendedperiodsoftime,anafterimagemay
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
Whenthemonitoriscoldandbroughtintoaroomortheroomtemperaturegoesupquickly,dewcondensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes.Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

2CONTENTS
CONTENTS
Notice for this monitor.............................................. 1
To use the monitor comfortably............................... 1
Chapter 1 Features and Overview .....................3
1-1 Features............................................................ 3
1-2 Buttons and Indicators.................................... 3
1-3 Functions and Basic Operation...................... 4
Chapter 2 Settings and Adjustments ................6
2-1 Utility Disk ........................................................ 6
●Disk contents and software overview................. 6
●To use ScreenManager Pro for LCD.................. 6
2-2 Display Mode Selection................................... 6
●To choose Dual Display [Display Setup]............. 6
2-3 Color Adjustment............................................. 7
Simple Adjustment [FineContrast Mode]............ 7
●FineContrast mode............................................. 7
●To select FineContrast mode.............................. 7
●To update color setting of FineContrast mode.... 7
Advanced Adjustments [Adjustment Menu]....... 8
●To select an appropriate mode for images......... 8
●To set/adjust color .............................................. 9
2-4 Off Timer/Power Saving Settings................. 10
●To set monitor power-off time [Off Timer]......... 10
●To set monitor power-saving [DVI DMPM] ....... 10
2-5 Screen Size Selection.....................................11
●To change screen size [Screen Size]................11
●To adjust brightness of non-display area
[Border Intensity]...............................................11
●To modify blurred characters/lines
[Smoothing].......................................................11
2-6 Power Indicator/EIZO Logo Display Settings12
●To turn off the Power indicator while a screen is
displayed [Power Indicator].............................. 12
●To display EIZO logo
[EIZO Logo Appearing Function]...................... 12
2-7 Locking Buttons ............................................ 12
●To lock operation [Adjustment Lock]................. 12
2-8 Setting Adjustment Menu Display................ 13
●To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
Translucent]...................................................... 13
2-9 Setting Orientation ........................................ 14
●To set the orientation of the Adjustment menu
[Orientation]...................................................... 14
2-10 Viewing Information/Setting Language....... 14
●To check settings, usage time, etc.
[Information] ..................................................... 14
●To set a language to be displayed
[Language] ....................................................... 14
2-11 Beeper Setting ............................................... 15
●To set the beeper [Beep].................................. 15
2-12 Selecting Input Signal .................................. 15
●To select input signal [Input Signal].................. 15
2-13 Resumption of Default Setting..................... 16
●To reset color adjustment [Reset]..................... 16
●To reset all settings [Reset].............................. 16
Chapter 3 Connecting Cables..........................17
3-1 Connecting Peripheral USB Devices........... 17
Chapter 4 Troubleshooting...............................18
Chapter 5 Reference .........................................20
5-1 Attaching an Arm........................................... 20
5-2 Cleaning.......................................................... 20
5-3 Specications ................................................ 21
5-4 Glossary ......................................................... 24

3
Chapter 1 Features and Overview
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 29.8 inch class wide screen format LCD
• WQXGA(2560×1600)displaycompliant(SIGNAL1)
• HDCP signal (SIGNAL2) compliant
• Dual-displaycompliantbyintroducingdual-inputsystem(DVI-D×2
connectors)
• DVI digital input (TMDS) compliant
• Horizontalscanfrequency:31-100kHz
• Verticalscanfrequency: 59-61Hz(VGATEXT:69-71Hz)
• Resolution: 2560dots×1600lines
• Compatible with frame synchronization mode (59 - 61 Hz)
• Portrait/Landscape display available (rotate 90 degrees clockwise)
• Smoothing (soft - sharp) function
• FineContrast mode to allow the best mode for screen display
• Theutilitysoftware“ScreenManagerProforLCD”(forWindows)tocontrol
the monitor from a PC with mouse/keyboard is included (refer to the EIZO
LCD Utility Disk).
1-2 Buttons and Indicators
Adjustment menu (*ScreenManager ® )
Buttons
1. Input signal selection button
2. Mode button
3. Enter button
4. Control buttons (Left, Down, Up, Right)
5. Power button
6. Power indicator
Indicator status Operation status
Blue The screen is displayed
Orange Power saving
Off Power off
* ScreenManager ®is an EIZO’s nickname of the Adjustment menu.
NOTE
• Whilethescreenisdisplayed,the
blue power indicator that is lighting
blue can be turned off (see “To turn
off the Power indicator while a screen
is displayed [Power Indicator]” on
page 12).
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time [Off Timer]”
on page 10.
NOTE
• This monitor supports the Portrait/
Landscape display. This function
allows you to change the orientation
of the Adjustment menu when using
the monitor screen in vertical display
position. (Refer to “2-9 Setting
Orientation” on page 14.)
• If you use the monitor with “Portrait”
position,thesettingmayberequired
to change depending on the graphics
board used in your PC. Refer to the
manual of the graphics board for
details.

4Chapter 1 Features and Overview
1-3 Functions and Basic Operation
To adjust the screen and color
• TheAdjustment menu and the FineContrast menu cannot
be displayed at the same time.
Color adjustment
Simple adjustment [FineContrast mode]
This function allows easy selection of a desired mode
from ve modes according to monitor application.
●After selecting the adjustment item by and ,
select values by and .
●“Brightness,” “Temperature,” and “Gamma” can be set
for each mode (Custom/sRGB/Text/Picture/Movie).
Settable functions vary with the display mode.
-/$%
FineContrast menu
Page 7
Brightness adjustment
Press or to adjust brightness.
Screen Adjustment
●To modify blurred characters/lines
[Smoothing]
Page 11
Color Adjustment
Advanced Adjustment
●“Brightness,” “Temperature,” “Gamma,”
“Saturation,” “Hue,” “Gain,” and “6 Colors” can be
set for each mode (Custom/sRGB/Text/Picture/
Movie).
Settable functions vary with the display mode.
Resumption of Default Setting
●To reset color adjustment [Reset] …see page 16
Page 8
Main menu (Refer to page 5 for operation)

5
Chapter 1 Features and Overview
Viewing Information
●To check settings, usage time, etc. [Information]
Setting Language
●To set a language to be displayed [Language]
To make useful settings/adjustments
Power Saving Setting
●To set monitor power-saving [DVI DMPM]
Screen Size Selection
●To change screen size
[Screen Size] ……………………… see page 11
●To adjust brightness of non-display area
[Border Intensity] …………………… see page 11
Selecting Input Signal
●To select input signal
[Input Signal]…………………………see page 15
Orientation Setting
●To set the orientation of the Adjustment menu
[Orientation] …………………………see page 14
Off Timer Setting
●To set monitor power-off time
[Off Timer] …………………………see page 10
Beeper setting
●To set the beeper [Beep]……………see page 15
Setting Adjustment Menu Display
●
To update menu settings [Menu Size/Menu Position/
Menu Off Timer/Translucent] …………see page 13
Power Indicator Setting
●To turn off the Power indicator while a screen is
displayed
[Power Indicator] ……………………see page 12
Resumption of Default Setting
●
To reset all settings [Reset] …………see page 16
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press . The Main menu appears.
(2) Select a function with / / / , and press . The Sub menu appears.
(3) Select a function with / / / , and press . The adjustment/setting menu appears.
(4) Adjust the selected item with / / / , and press . The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the Sub menu and press . The Main menu appears.
(2) Choose <Exit> from the Main menu and press .TheAdjustmentmenuquits.
NOTE
• TheAdjustment menu can also be exited by pressing twicequickly.
• <Exit> or <Return> can also be selected by pressing twice in the Main menu or Sub menu.
Page 10
Page 14
EIZO Logo Display Setting
●To display EIZO logo [EIZO Logo Appearing
Function] ………………………… see page 12
Locking Buttons
●To lock operation
[Adjustment Lock] ……………… see page 12
Display Mode Selection
●To choose Dual Display
[Display Setup]……………………… see page 6
Adjustment menu (Refer to below for operation)
Page 14

6Chapter 2 Settings andAdjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
● Disk contents and software overview
The disk includes color profiles, application software programs for adjustment, and User’s Manual. Refer to “Readme.
txt” or the “read me” file on the disk for software startup procedures or file access procedures.
Item Overview For Windows For Macintosh
A “Readme.txt” or “read me” le √ √
Color Proles (ICC Proles) A specic le including the color
characteristic information for the
monitor. √ √
ScreenManager Pro for LCD (for
Windows) A utility software program to control monitor adjustments from a PC using
its mouse and keyboard.
(A PC must be connected to the
monitor with the supplied USB cable.)
Refer to the description later. √−
WindowMovie Checker Software WindowMovie is a function of
ScreenManager Pro for LCD.
For more information, refer to the
User’s Manual of ScreenManager Pro
for LCD on the disk.
User’s Manual of this monitor (PDF le)
● To use ScreenManager Pro for LCD
For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.
To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable.
For details, refer to Chapter 3 Connecting Cables, item 3-1 Connecting Peripheral USB Devices (page 17).
2-2 Display Mode Selection
● To choose Dual Display [Display Setup]
(1) Check that the monitor and the PC are powered off.
(2) Press and simultaneously to display the Display Setup menu.
Single Display: Press [Single Display].
Dual Display: Press [Dual Display].
(3) Press .
(4) Turn on the PC.
The display appears on the screen.
Attention
• Default setting: Single Display
Chapter 2 Settings and Adjustments

7
Chapter 2 Settings and Adjustments
2-3 Color Adjustment
Simple Adjustment [FineContrast Mode]
This function allows you to select the best display mode for monitor brightness,
etc.
● FineContrast mode
Anappropriatedisplaymodeisselectableoutofvemodes.
Mode Purpose
Custom Available for making desired setting.
sRGB Suitable for color matching with sRGB compatible
peripherals.
Text Suitable for displaying texts for word processing or
spreadsheets.
Picture Suitable for displaying images such as photos or picture
images.
Movie Suitable for playing back animated images.
FineContrast menu
Example) Custom Displays current mode.
Displays current settings of brightness, color
temperature, and gamma.
● To select FineContrast mode
(1) Press
-/$%
.
Thenecontrastmodechangesateverytimepressing
-/$%
.
(2) Choose desired mode and press .
The setting completes.
● To update color setting of FineContrast mode
<Brightness>, <Temperature>, and <Gamma> can be set or adjusted.
(1) Choose a desired function from the FineContrast menu with or .
(2) Adjust the selected function with or , and press .
The adjustment is completed.
Attention
• Color temperature values and gamma
valuesarexedinsomemodes.
Set them as shown in “To select an
appropriate mode for images” on page
8.
NOTE
• The <Color> menu of theAdjustment
menu allows advanced color
adjustments for each mode. Refer to
“To select an appropriate mode for
images” on page 8.
NOTE
• TheAdjustment menu and the
FineContrast menu cannot be
displayed at the same time.

8Chapter 2 Settings and Adjustments
Advanced Adjustments [Adjustment Menu]
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● To select an appropriate mode for images
√:Adjustmentavailable−:Invalidforadjustment
Icon Function FineContrast mode
Custom sRGB Text Picture Movie
Brightness *√ √ √ √ √
Temperature *√−√ √ √
Gamma *√−√− −
Saturation √−√ √ √
Hue √−√ √ √
Gain √− − − −
6 Colors √− − − −
Reset √ √ √ √ √
* These items can also be set or adjusted with the FineContrast menu.
Menu Description Adjustment range
Brightness To adjust the full screen
brightness as desired 0 to 100%
NOTE
• You can also adjust the brightness by pressing or
button while the adjustment menu is not displayed. Press
after adjustment.
• The values shown in the “%” are available only as reference.
Temperature To select a color
temperature 4000K to 10000K in units of 500K (including 9300K).
NOTE
• Setting the value to “Off” presents the natural color
temperature of the panel.
• The values shown in the Kelvin (K) are available only as
reference.
Gamma To set a gamma value 1.4 to 3.0, Fixed
NOTE
• Only when selecting <Custom> in the ne contrast mode,
“Fixed” is available.
Saturation To adjust color saturation –100 to 100
Setting the minimum (–100) turns
the image to a monochrome
screen.
Attention
• This function does not enable to display every color gradation.
Hue To produce a desired skin
color, etc. –100 to 100
Attention
• This function does not enable to display every color gradation.
NOTE
• TheAdjustment menu and the
FineContrast menu cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
Attention
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance
with
-/$%
.
• Wait30minutesormorefrom
monitor power on before starting the
color adjustment.
• Choose <Reset> in the <Color> menu
to revert to the default settings (factory
settings) of hue of the color mode
selected.
• The same image may be seen in
different colors on multiple monitors
duetotheirmonitor-specic
characteristics.Makenecolor
adjustment visually when matching
colors on multiple monitors.

9
Chapter 2 Settings and Adjustments
Menu Description Adjustment range
Gain To adjust red, green, and
blue to a desired color tone
respectively
0 to 100%
Adjust the respective brightness of
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• The values shown in the “%” are available only as reference.
• When using the <Gain> setting, the <Temperature> setting is
set to “Off.”
6 Colors To adjust <Hue> and
<Saturation> in Red,
Yellow, Green, Cyan, Blue,
and Magenta respectively
Hue: –100 to 100
Saturation: –100 to 100
Reset To reset the color settings of the selected FineContrast mode to
the default settings
● To set/adjust color
(1) Choose <Color> from theAdjustment menu, and press .
(2) Select a desired function from the <Color> menu, and press .
The selected function menu appears.
(3) Adjust the selected item with / / / , and press .
The adjustment is completed.

10 Chapter 2 Settings and Adjustments
2-4 Off Timer/Power Saving Settings
● To set monitor power-off time [Off Timer]
Thisfunctionallowsthemonitortoautomaticallyturnoffafteraspeciedtime
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
[Off Timer System]
Timer Monitor Power Indicator
ON time (1H - 23H) Operating Blue
Last 15 min. in “ON time” Advance Notice* Flashing blue
“ON time” expired Power Off Off
* When is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Off Timer> from the <Others> menu, and press .
The <Off Timer> menu appears.
(3) Select “Enable” with or .
(4) Set a monitor ON time (1 to 23 hours) with or , and press .
The Off Timer setting is completed.
[Resumption Procedure]
• Press .
● To set monitor power-saving [DVI DMPM]
This monitor complies with the DVI DMPM standard.
[Power Saving System]
Themonitorentersthepowersavingmodeinvesecondsinconnectionwith
the PC setting.
PC Monitor Power Indicator
Operating Operating Blue
Power saving Power saving Orange
[Procedure]
(1) Choose <PowerManager> from theAdjustment menu, and press .
The <Set> menu appears.
(2) Select “DVI DMPM” with or , and press .
The power saving setting is completed.
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
Attention
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
Attention
• Unplugging the power cord
completely shuts off power supply to
the monitor.
• USB compliant devices connected
to the monitor work even if the
monitor is in the power saving mode.
Therefore, power consumption of the
monitor varies with connected devices
even in the power saving mode.

11
Chapter 2 Settings and Adjustments
2-5 Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is
displayed in full screen automatically. You can change the screen size by using
<Screen Size> from <Others> menu.
Menu Function
Full Screen
(default setting) Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
Enlarged Displays an image in full screen. In some cases, a blank horizontal or vertical border appears to equalize the
vertical rate and the horizontal rate.
Normal Displays images with the specied resolution.
Example:Imagesize1280×1024whensetting<SingleDisplay>in<Display
Setup>.
(2560×1600) (2000×1600) (1280×1024)
Full Screen
(Default setting) Enlarged Normal
[Procedure]
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Screen Size> from the <Others> menu, and press .
The screen size setting window appears.
(3) Select “Full Screen,” “Enlarged,” or “Normal” with or , and press
.
The screen size setting is completed.
● To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Border Intensity> from the <Others> menu, and press .
The <Border Intensity> menu appears.
(3) Adjust border intensity with or , and press .
The border intensity adjustment is completed.
● To modify blurred characters/lines [Smoothing]
Whenalow-resolutionimageisdisplayedinthe“FullScreen”or“Enlarged”
mode, the characters or lines of the displayed image may be blurred.
(1) Choose <Screen> from theAdjustment menu, and press .
(2) Choose <Smoothing> from the <Screen> menu, and press .
The <Smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp) with
or , and press .
The smoothing adjustment is completed.
Attention
• Smoothingsettingmaynotberequired
depending on the display resolution.
(You cannot choose the smoothing
icon.)

12 Chapter 2 Settings and Adjustments
2-6 Power Indicator/EIZO Logo Display
Settings
● To turn off the Power indicator while a screen is displayed
[Power Indicator]
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Power Indicator> from the <Others> menu, and press .
The <Power Indicator> menu appears.
(3) Select “Disable” with or , and press .
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing Function]
Whenthisunitisturnedon,theEIZOlogoappearsatthecenterofthescreen.
Selection to display or not to display the logo is available with this function.
(1) Press to turn off the unit.
(2) Press again while pressing to turn on the unit.
The EIZO Logo display/non-display function is toggled.
2-7 Locking Buttons
● To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked • (Enter button) Adjustments/settings using
Adjustment menu
Buttons that cannot
be locked •
-/$%
(Mode button) FineContrast mode selection/
adjustment
• / Brightness adjustment using control buttons
• (Input Signal Selection button),
-/$%
(Mode button),
(Power button).
(1) Press to turn off the unit.
(2) Press again while pressing
-/$%
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Press to turn off the unit.
(2) Press again while pressing
-/$%
.
The screen is displayed with the adjustment lock released.
NOTE
• The Power indicator lights up at
power on with the default setting.
NOTE
• The logo appears with the default
setting.

13
Chapter 2 Settings and Adjustments
2-8 Setting Adjustment Menu Display
● To update menu settings [Menu Size/Menu Position/Menu
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Size> from the <Menu Settings> menu, and press .
The <Menu Size> menu appears.
(4) Select “Normal” or “Enlarged” with or , and press .
The menu size setting is completed.
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Position> from the <Menu Settings> menu, and press .
The <Menu Position> menu appears.
(4) Select a menu position with / / / , and press .
The menu position setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press .
The <Menu Off Timer> menu appears.
(4) Select “Enable” with or .
(5) Choose an Off Time (15/30/45/60 seconds) with or , and press .
The menu off timer setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Translucent> from the <Menu Settings> menu, and press .
The <Translucent> menu appears.
(4) Adjust the transparency for menu display with or , and press .
The transparency setting is completed.

14 Chapter 2 Settings and Adjustments
2-9 Setting Orientation
● To set the orientation of the Adjustment menu [Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Menu Settings> from the <Others> menu, and press .
(3) Choose <Orientation> from the <Menu Settings> menu, and press .
The <Orientation> menu appears.
(4) Select “Portrait” with or , and press .
The orientation setting is completed.
(5) Turn the monitor screen 90° in clockwise direction.
2-10 Viewing Information/Setting Language
● To check settings, usage time, etc. [Information]
This function allows you to check settings, model name, serial number, display
mode (see page 6), and usage time of the monitor.
(1) Choose <Information> from theAdjustment menu, and press .
The <Information> menu appears.
(2) Then, press to check settings, etc.
● To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/SimpliedChinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from theAdjustment menu, and press .
The <Language> menu appears.
(2) Choose a language with / / / , and press .
The language setting is completed.
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
Attention
• The information is displayed in the
following order; settings, SIGNAL1,
SIGNAL2 display mode (see page 6)
and model name, serial No, and usage
time of the monitor.
NOTE
• If you use the monitor with “Portrait”
position,thesettingmayberequired
to change depending on the graphics
board used in your PC. Refer to the
manual of the graphics board for
details.
Attention
• Be sure to turn the monitor screen
after pulling up the screen to the
uppermost position of the stand and
setting the screen tilted upward.

15
Chapter 2 Settings and Adjustments
2-11 Beeper Setting
● To set the beeper [Beep]
Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type Conditions for beeping
Short beep • When
-/$%
is pressed.
• When an item is selected with .
• When a maximum or minimum value is set with
the control switches.
• When is pressed.
Long beep • When registration is performed with .
Consecutive beeps • When the monitor is not connected correctly.
• When the PC is not turned on.
• When no signal is received.
• When a frequency out of the specied range is
received.
Beep-beep once every 15
seconds • 15 minutes before the power off time set by “Off
Timer” (advance notice time)
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Beep> from the <Others> menu, and press .
The <Beep> menu appears.
(3) Select “On” or “Off” with or , and press .
The beep setting is completed.
2-12 Selecting Input Signal
● To select input signal [Input Signal]
In single display mode, this function allows you to select the signal displayed
on the monitor.
Priority setting Function
Auto When either PC is turned off or enters the power-
saving mode, the monitor automatically displays
signals of another PC.
Manual The monitor does not detect the PC’s signals
automatically. Select an active input signal with .
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Input Signal> from the <Others> menu, and press .
The <Input Signal> menu appears.
(3) Choose <Auto/Manual> with or , and press .
NOTE
• Whentheinputsignalsettingis
“Auto” in single display mode, if
no input signal is received on both
SIGNAL1 and SIGNAL2 port, the
signal port selecting function is
performed at every two seconds.

16 Chapter 2 Settings and Adjustments
2-13 Resumption of Default Setting
● To reset color adjustment [Reset]
The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from theAdjustment menu, and press .
(2) Choose <Reset> from the <Color> menu, and press .
The <Reset> menu appears.
(3) Select “Reset”with or , and press .
The reset operation is completed.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from theAdjustment menu, and press .
(2) Choose <Reset> from the <Others> menu, and press .
The <Reset> menu appears.
(3) Select “Reset”with or , and press .
The reset operation is completed.
NOTE
• For default settings, refer to “Main
default settings (factory settings)” on
page 21.

17
Chapter 3 Connecting Cables
3-1 Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
● Required System Environment
(1) APCequippedwithaUSBportoranotherUSBhubconnectedtoaUSB
compatible PC
(2) Windows2000/XP/VistaorMacOS9.2.2andMacOSX10.2orlater
(3) EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) ConnectthemonitorrsttoaPCusingthesignalcable,andrunthePC.
(2) Connect the supplied USB cable between the downstream USB port of a
USB compatible PC (or another USB hub) and the monitor’s upstream USB
port.
(3) WhentheUSBfunctionsetupiscompleted,themonitorfunctionsasaUSB
hub allowing connection to various peripheral USB devices through its
downstream USB ports.
Upstream
Downstream
The USB function is set up automatically upon connection of the USB cable.
Chapter 3 Connecting Cables
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the monitor is in the power saving
mode, or if the monitor is connected
to the power outlet with the monitor
turned off, all the devices connected
to the USB ports (upstream and
downstream) work. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.

18 Chapter 4 Troubleshooting
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-pictureproblems→SeeNo.1-No.2.
• Imagingproblems→SeeNo.3-No.9.
• Otherproblems→SeeNo.10-No.12.
• USBproblems→SeeNo.13.
Problems Possible cause and remedy
1. No picture
• Power indicator does not light. • Check whether the power cord is connected correctly.
• Press
• Power indicator is lighting blue.
• Power indicator is lighting orange. • Switch the input signal with .
• Operate the mouse or keyboard.
• Turn on the PC.
• Either SIGNAL1 or SIGNAL2 may have an error in dual
display mode. Check that in <Information> (see page
14).
2. The message below appears. This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is input.
[Single Display]
[Dual Display]
In dual display mode, the error message appears only
when both of SIGNAL1 and SIGNAL2 have errors.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with . (Single display mode
only)
• The message below shows that the input signal is
out of the specied frequency range. (Such signal
frequency is displayed in red.)
Example:
[Single Display]
[Dual Display]
In dual display mode, the error message appears only
when both of SIGNAL1 and SIGNAL2 have errors.
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
3. Characters are blurred. • Adjust using <Smoothing>.
4. The screen is too bright or too dark. • Adjust <Brightness>. (The LCD monitor backlight has a
xed life span. When the screen becomes dark or begins
to icker, contact your local dealer.)