Eizo FLEXSCAN SX2762W User manual

Important
Please read PRECAUTIONS, this User’s Manual, and Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC to using the monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizo.com
Cover

2
Location of Caution Statement
This product has been adjusted specically for use in the region to which it was originally shipped. If operated
outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that
EIZO monitor specications are subject to change without notice.

3

Notice for this monitor
Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to
applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until
the dew condensation disappears, otherwise it may cause some damage to the monitor.

4
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel,
and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
Note
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with
water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according
to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5
CONTENTS
CONTENTS
Cover ...................................................................... 1
Notice for this monitor ............................................ 3
CONTENTS ............................................................. 5
Chapter 1 Introduction ....................................... 7
1-1. Features ......................................................... 7
1-2. Controls and Functions ............................... 8
1-3. EIZO LCD Utility Disk.................................... 9
●Diskcontentsandsoftwareoverview............. 9
●Touse“ScreenManagerProforLCD/
EIZOScreenSlicer”......................................... 9
1-4. Basic Operations and Functions ................ 9
●BasicAdjustmentmenuoperations................ 9
●ShowingButtonGuide...................................10
●Functions........................................................11
Chapter 2 Adjusting Screens .......................... 13
2-1. Compatible Resolutions .............................13
●DigitalInput(DVI-D:SingleLink)...................13
●DigitalInput(DVI-D:DualLink,
DisplayPort,MiniDisplayPort).......................13
2-2. Setting the Resolution ................................14
●Windows7......................................................14
●WindowsVista................................................14
●WindowsXP...................................................14
●MacOSX.......................................................14
2-3. Adjusting Color ............................................15
●Toselectthedisplaymode
(FineConstrastmode).....................................15
●Toperformadvancedadjustments................16
●Adjustablesettingsineachmode..................16
●Toadjustbrightness“Brightness”..................17
●Toadjustcontrast“Contrast”..........................17
●Toadjustcolortemperature“Temperature”...18
●Toadjustgamma“Gamma”...........................18
●Toadjusthue“Hue”........................................18
●Toadjustcolorsaturation“Saturation”...........19
●Toenable/disableContrastEnhancer
“ContrastEnhancer”.......................................19
●Toenhanceoutlineofimage
“OutlineEnhancer”.........................................19
●Toadjustgain“Gain”..................................... 20
●Toadjustsixcolors“6Colors”....................... 20
2-4. Selecting Screen Size .................................21
●Tochangescreensize“ScreenSize”............21
2-5. Conguring Moving Image Performance
“Overdrive” ...................................................21
2-6. Enabling/Disabling Auto Sharpness
“Auto Sharpness” ....................................... 22
Chapter 3 Setting Monitor ............................... 23
3-1. Enabling/Disabling Mode Selection
“Mode Preset” ............................................. 23
3-2. Setting Language “Language” .................. 23
3-3. Setting Orientation “Orientation” ............. 24
3-4. Changing Adjustment Menu Display
Position “Menu Position” .......................... 24
3-5. Setting the EIZO Logo Display “Logo” .... 24
3-6. Locking Buttons “Key Lock” ..................... 25
3-7. Enabling/Disabling DDC/CI
communication ........................................... 25
3-8. Setting the Input Signals “Signal
Selection” .................................................... 26
●ToconnectDVI(SingleLink)......................... 26
●ToconnectDVI(DualLink)........................... 26
●ToconnectDVI(SimpledisplayofHDMI
signalfromdigitalcamera)............................ 27
●ToconnectDisplayPort/MiniDisplayPort.... 27
3-9. To Disable Input Signal “Input Skip” ........ 28
3-10. Return To Default Setting........................... 28
●Toresetthecoloradjustmentvalue
“ColorReset”................................................. 28
●Toresetalladjustmentstothedefault
settings“AllReset”........................................ 28
Chapter 4 Power Saving Functions ................ 29
4-1. Setting Power Saving “Power Save” ........ 29
4-2. Setting the power saving mode when a
person leaves the monitor
“EcoView Sense” ........................................ 30
4-3. Enabling/Disabling Automatic
Brightness Adjustment “Auto EcoView” ..31
4-4. Setting Power Indicator
“Power Indicator” ........................................31
4-5. Setting the automatic power off function
“Eco Timer” ..................................................31
4-6. Displaying the power saving ratio
“EcoView Index” ......................................... 32
Chapter 5 Troubleshooting .............................. 33
5-1. No picture .................................................... 33
5-2. Imaging problems ....................................... 35
5-3. Other problems ........................................... 36
Chapter 6 Reference ........................................ 37
6-1. How to Attach the Optional Arm ................37
6-2. Connecting Multiple PCs ........................... 38
●Toswitchamonginputsignals...................... 39
●Tosetinputsignalselection
“InputSelection”............................................ 39

6CONTENTS
6-3. Making Use of USB (Universal Serial
Bus) ............................................................... 40
●RequiredSystemEnvironment..................... 40
●ConnectionProcedure
(SetupofUSBFunction)................................ 40
6-4. Displaying monitor information .................41
●Displayingsignalinformation“SignalInfo”....41
●DisplayingMonitorInformation
“MonitorInfo”..................................................41
6-5. Specications ............................................. 42
6-6. Glossary ....................................................... 44
Appendix .............................................................. 46
Trademark ............................................................... 46
License .................................................................... 46
TCO ...........................................................................47
FCC Declaration of Conformity ............................ 48
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monitor ..................... 49
Hinweis zur Ergonomie : ....................................... 49
LIMITED WARRANTY ............................................. 50
China Measures for RoHS Compliance in
ChinaRoHS ........................................................ 59

7
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 27.0″ wide format LCD
• Applicable to the resolution of 2560 × 1440.
• IPS panel with 89° horizontal and vertical viewing angles
• Applicable to Displayport / Mini DisplayPort (applicable to 8 bit or 10 bit)
• 3 signal input terminals (DVI-D × 1, DisplayPort × 1, Mini DisplayPort × 1)
• The FineContrast function allows the user to select the display mode optimum to the displayed image.
- The Paper mode reproduces a printed paper effect on the monitor.
See “To select the display mode (FineConstrast mode)” (page 15).
• The software “ScreenManager Pro for LCD” to adjust the screen using the mouse and keyboard is included
See “1-3. EIZO LCD Utility Disk” (page 9).
• Supports Color Vision Deciency Simulation Software “UniColor Pro”
This software can be downloaded from our web site (http://www.eizo.com).
• Supports the power management software “EIZO EcoView NET”
For more information, refer to our web site (http://www.eizo.com).
• Power saving function
Suppressing the power consumption* reduces the carbon dioxide emissions. This product is equipped with power
saving function.
- Power Consumption when main power switch is Off: 0 W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
- EcoView Sense function
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,
the function reduces the power consumption.
See “4-2. Setting the power saving mode when a person leaves the monitor “EcoView Sense”” (page 30).
- Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably. Excessively high brightness may lead a damage to the natural environment as well
as to your eyes. Suppressing the excessively high brightness will be helpful to reduce the power consumption and
the damage to your eyes.
See “4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView”” (page 31).
- EcoView Index function
This indicator shows the power saving ratio, power reduction and CO2 reduction as a result of the brightness of the
monitor.
You can realize the power consumption reduction by taking consideration in the ratio of power saving.
See “4-6. Displaying the power saving ratio “EcoView Index”” (page 32).
• HDCP (High-bandwidth Digital Content Protection) (DisplayPort / Mini DisplayPort only)
*Reference values:
Maximum power consumption: 160W (Brightness Max., when a USB device is connected, at default settings)
Standard power consumption: 64W (Brightness 120cd/m2, when no USB device is connected, at default settings)

8Chapter1Introduction
Note
• This monitor supports the portrait display. This function allows you to change the orientation of the Adjustment
menu when using the monitor screen in vertical display position (see “3-3. Setting Orientation “Orientation”” (page 24)).
• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When
placing the monitor in a “Portrait” position, settings of your graphics board need to be changed. Refer to the User’s
Manual of the graphics board for details.
1-2. Controls and Functions
Adjustmentmenu*1
15
16
1 2 3 4 5 6 7 8 9
17
1011 12 1314
1. EcoView Sense sensor Detectsthemovementofapersoninfrontofthemonitor.EcoViewSensefunction(page30).
2. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction(page31).
3. button Switchesinputsignalsfordisplay(page39).
4. button ChangesFineContrastmode(page15).
5. button Cancelsthesetting/adjustmentandexitstheAdjustmentmenu.
6. button
• Choosesandincreases/decreasesadjustmentsettingsforadvancedadjustment
usingtheAdjustmentmenu.
• DisplaystheBrightnessmenu(page17).
7. button DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,andsaves
valuesadjusted(page9).
8. button Turnsthepoweronoroff.
9. Power indicator
Indicatesthemonitor’soperationstatus.
Blue: Operating
Orange: Powersavingmode
OFF: Mainpower/Poweroff
10. Main power switch Turnsthemainpoweronoroff.
11. Power connector Connectsthepowercord.
12. Input signal connector Left:DVI-Dconnector/Center:DisplayPortconnector/Right:MiniDisplayPort
connector
13. USB port (Up) ConnectstheUSBcabletousethesoftwarethatneedsUSBconnection,ortouseUSB
hubfunction(page40).
14. USB port (Down) ConnectsaperipheralUSBdevice.
15. Stand*2 Usedtoadjusttheheightandangleofthemonitorscreen.
16. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
17. Cable holder Coversthemonitorcables.
*1See“1-4.BasicOperationsandFunctions”(page9)forhowtouse.
*2Anoptionalarm(oranoptionalstand)canbeattachedbyremovingthestand(see“6-1.HowtoAttachtheOptional
Arm”(page37)).

9
Chapter1Introduction
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk
contents and the overview of the software programs.
● Disk contents and software overview
The disk includes software programs for adjustment, and User’s Manual. Refer to Readme.txt le on the disk
for software startup procedures or le access procedures.
Item Overview Windows Macintosh
Readme.txtle √ √
ScreenManagerProforLCD Softwareforadjustingthescreenusingthe
mouseandkeyboard.
ConnectthemonitortothePCwiththe
suppliedUSBcablebeforeinstallation. √ -
* WindowMovie
CheckerSoftware
WindowMovieisafunctionof
“ScreenManagerProforLCD”.Fordetailed
informationon“ScreenManagerProfor
LCD”,refertoitsUser’sManualonthedisk.
EIZOScreenSlicer Softwarethatdividesascreenandlaysout
multiplewindowsefciently.
√ -
User’sManualofthismonitor(PDFle) √ √
● To use “ScreenManager Pro for LCD/EIZO ScreenSlicer”
For the installation and use of “ScreenManager Pro for LCD/EIZO SceenSlicer”, refer to the respective
User’s Manual on the disk.
1-4. Basic Operations and Functions
● Basic Adjustment menu operations
1. Displaying Adjustment Menu
1. Press . The Adjustment menu appears.
Currentmode
Menutitle
Settings
Menu
Item

10 Chapter1Introduction
2.
Adjusting/Setting
1. Choose a menu to adjust/set with , , and then press .
2. Choose an item to adjust/set with , , and then press .
3. Adjust/set the selected item with , , and then press .
3.
Exiting
1. Press a few times. The Adjustment menu nishes.
● Showing Button Guide
Press the front buttons (except button), the button guide appears above the button.
(When using the monitor with “Portrait” position, the button guide appears next to the button.)
Note
• The button guide will continue to appear while the Adjustment menu or Mode menu is showing.
• The button guide is displayed differently depending on the selected menu or status.

11
Chapter1Introduction
● Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menu Setting Reference
Color Brightness “2-3.AdjustingColor”(page15)
Contrast
Temperature
Gamma
Advanced
Settings
Hue
Saturation
ContrastEnhancer
OutlineEnhancer
Gain
6Colors
ColorReset “3-10.ReturnToDefaultSetting”(page28)
Screen ScreenSize “2-4.SelectingScreenSize”(page21)
Overdrive “2-5.ConguringMovingImagePerformance
“Overdrive””(page21)
AutoSharpness “2-6.Enabling/DisablingAutoSharpness“Auto
Sharpness””(page22)
Power
Manager
PowerSave
“4-1.SettingPowerSaving“PowerSave””(page29)
EcoViewSense
“4-2.Settingthepowersavingmodewhenaperson
leavesthemonitor“EcoViewSense””(page30)
AutoEcoView “4-3.Enabling/DisablingAutomaticBrightness
Adjustment“AutoEcoView””(page31)
PowerIndicator “4-4.SettingPowerIndicator“PowerIndicator””
(page31)
EcoTimer “4-5.Settingtheautomaticpowerofffunction
“EcoTimer””(page31)
EcoViewIndex “4-6.Displayingthepowersavingratio“EcoView
Index””(page32)
MenuSettings Language “3-2.SettingLanguage“Language””(page23)
Orientation “3-3.SettingOrientation“Orientation””(page24)
MenuPosition “3-4.ChangingAdjustmentMenuDisplay
Position“MenuPosition””(page24)

12 Chapter1Introduction
Tools InputSelection “Tosetinputsignalselection“InputSelection””
(page39)
InputSkip “3-9.ToDisableInputSignal“InputSkip””(page
28)
ModePreset “3-1.Enabling/DisablingModeSelection“Mode
Preset””(page23)
SignalInfo “6-4.Displayingmonitorinformation”(page41)
MonitorInfo
AllReset “3-10.ReturnToDefaultSetting”(page28)
* Theadjustment/settingsavailableon“Color”dependontheselectedmode.(See“2-3.AdjustingColor”
(page15).)

13
Chapter2AdjustingScreens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions
The monitor supports the following resolutions.
● Digital Input (DVI-D: Single Link)
Resolution Applicable Signals Vertical Scan
Frequency Dot Clock
640×480 VGA 60Hz
162MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA 60Hz
1024×768 VESA 60Hz
1280×960 VESA 60Hz
1280×1024 VESA 60Hz
1600×1200 VESA 60Hz
1920×1080*1 1080p@50 50Hz
1920×1080 CEA-861 60Hz
1920×1200 VESACVTRB 60Hz
2560×1440*2 SingleLink10bit 30Hz
● Digital Input (DVI-D: Dual Link, DisplayPort, Mini DisplayPort)
Resolution Applicable Signals Vertical Scan
Frequency Dot Clock
640×480 VGA 60Hz
242MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA 60Hz
1024×768 VESA 60Hz
1280×960 VESA 60Hz
1280×1024 VESA 60Hz
1600×1200 VESA 60Hz
1920×1080*1 1080p@50 50Hz
1920×1080 CEA-861 60Hz
1920×1200 VESACVT 60Hz
2560×1440*3 DualLink 60Hz
A graphics board in conformance with the VESA and CEA-861 standards is required.
*1 For some types of AV device
*2 Supported resolution differs depending on your graphics board.
*3 Recommended resolution
See “3-8. Setting the Input Signals “Signal Selection”” (page 26).

14 Chapter2AdjustingScreens
2-2. Setting the Resolution
When you connect the monitor to the PC and nd that the resolution is improper, or when you want to change
the resolution, follow the procedure below.
● Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Screen resolution”.
3. On the “Screen Resolution” dialog box, select the monitor.
4. Click “Resolution” to select the desired resolution.
5. Click the “OK” button.
6. When a conrmation dialog box is displayed, click “Keep changes”.
● Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the
“Resolution” eld.
5. Click the “OK” button.
6. When a conrmation dialog box is displayed, click “Yes”.
● Windows XP
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Properties”.
3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired
resolution for “Screen resolution” under “Display”.
4. Click the “OK” button to close the dialog box.
● Mac OS X
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions”
eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution, close
the window.

15
Chapter2AdjustingScreens
2-3. Adjusting Color
● To select the display mode (FineConstrast mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode Purpose
1-User1 Selectoneoftheseusermodestodeneadesiredsetofparametersettings.
2-User2
3-User3
4-Paper Producesaprintedpapereffectbydecreasingcontrastandcolortemperature.
5-Text Suitablefordisplayingtextsforwordprocessingorspreadsheets.
6-Picture Suitablefordisplayingimagessuchasphotosorpictureimages.
7-Movie Suitableforplayingbackanimatedimages.
8-sRGB SuitableforcolormatchingwithsRGBcompatibleperipherals.
Themodemenu
appears.
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time is pressed.
You can switch the mode with or while the mode menu is displayed.
→ 1-User1←→2-User2←→3-User3←→4-Paper←→5-Text←→6-Picture←→7-Movie←→ 8-sRGB←
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specic mode to be selected. For more information, see “3-1. Enabling/Disabling Mode Selection
“Mode Preset”” (page 23).
• “ScreenManager Pro for LCD” allows you to select the FineContrast mode automatically according to the application
used (see “Chapter 3 Auto FineContrast” in the “ScreenManager Pro for LCD” User’s Manual).

16 Chapter2AdjustingScreens
● To perform advanced adjustments
“Color” of the Adjustment menu allows you to congure and save a separate set of color settings for each
mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.
Make ne color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in “%” or “K” are available only as reference.
• Using the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and
keyboard of your PC. The adjusted conditions can be stored as the color data to be read in later. (See “Chapter 4
Color Adjustment” in the User’s Manual for “ScreenManager Pro for LCD”.)
● Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
√: Adjustable -: Not adjustable
Icon Function
FineContrast mode
1-User1
2-User2
3-User3
4-Paper 5-Text 6-Picture 7-Movie 8-sRGB
Brightness √ √ √ √ √ √
Contrast √ - √ √ √ -
Temperature √ √ √ √ √ √
Gamma √ - √ - - √
Hue √ - √ √ √ -
Saturation √ - √ √ √ -
ContrastEnhancer √ - - √ √ -
OutlineEnhancer √ √ √ √ √ √
Gain √ - - - - -
6Colors √ - - - - -
ColorReset √ √ √ √ √ √

17
Chapter2AdjustingScreens
● To adjust brightness “Brightness”
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD
back panel).
Adjustable range
0 to 100%
Procedure
1. Press or .
The Brightness menu appears.
2. Use or for adjustment.
3. Press to exit.
Note
• When your feel the image is bright even if the brightness is set to 0%, adjust the contrast.
• Alternatively, you can use “Brightness” under “Color” in the Adjustment menu to adjust it.
● To adjust contrast “Contrast”
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100%
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Contrast” from “Color”, and press .
“Contrast” appears.
3. Use or for adjustment.
4. Press to exit.
Note
• In the contrast of 100%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is too bright even if the brightness is set to 0% (Set the contrast to lower than 100%.)

18 Chapter2AdjustingScreens
● To adjust color temperature “Temperature”
The color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame
temperature. The gain preset values are set for each color temperature setting value.
Adjustable range
Native, 4000K-10000K (specied every 100K), Standard
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Temperature” from “Color”, and press .
3. Use or for adjustment.
4. Press to exit.
Note
• “Gain” allows you to perform more advanced adjustment (see “To adjust gain “Gain”” (page 20)).
• If you set “Native”, the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When gain is changed, the color temperature is changed to “User”.
● To adjust gamma “Gamma”
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the
variation rate is not proportional to the input signal. To keep the balance between the input signal and the
brightness of the monitor is called as “Gamma correction”.
Adjustable range
1.6 to 2.7
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Gamma” from “Color”, and press .
3. Use or for adjustment.
4. Press to exit.
● To adjust hue “Hue”
This function allows you to adjust the hue.
Adjustable range
-100 to 100
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Hue”, and press .
4. Use or for adjustment.
5. Press to exit.
Attention
• Using this function may make some color gradations unavailable for display.

19
Chapter2AdjustingScreens
● To adjust color saturation “Saturation”
This function allows you to adjust color saturation.
Adjustable range
-100 to 100
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Saturation”, and press .
4. Use or for adjustment.
5. Press to exit.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The minimum value (-100) changes the screen to monochrome.
● To enable/disable Contrast Enhancer “Contrast Enhancer”
This feature manages the brightness and gain levels of the backlight to match the image displayed while also
improving the sense of contrast of images by correcting gamma values.
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Contrast Enhancer”, and press .
4. Select “On” or “Off” with or .
5. Press to exit.
● To enhance outline of image “Outline Enhancer”
OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between
pixels composing the images. This may improve the texture of the material and its feel of the images. On the
contrary, it also functions to reproduce the images smoothly by gradating its outline.
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Outline Enhancer”, and press .
4. Select the display status in the range from -3 to 3 (soft to sharp) with or as desired.
5. Press to exit.

20 Chapter2AdjustingScreens
● To adjust gain “Gain”
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Gain”, and press .
4. Choose the color to adjust from “Red”, “Green”, and “Blue”, and then press .
5. Use or for adjustment.
6. Press to exit.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to “User”.
● To adjust six colors “6 Colors”
The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and Blue.
Adjustable range
-100 to 100
Procedure
1. Choose “Color” from the Adjustment menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “6 Colors”, and press .
4. Choose the color for adjustment among “Magenta”, “Red”, “Yellow”, “Green”, “Cyan”, or “Blue”, and
press .
5. Select “Hue” or “Saturation”, and press .
6. Use or for adjustment.
7. Press to exit.