Eizo FLEXSCAN T1721 User guide

English Deutsch Français 中文
Setup Manual
Important: Please read PRECAUTIONS, this Setup Manual and the User’s Manual
stored on the CD-ROM carefully to familiarize yourself with safe and effective
usage. Please retain this manual for future reference.
Installationshandbuch
Wichtig: Lesen Sie die VORSICHTSMASSNAHMEN, dieses Installationshandbuch
und das Benutzerhandbuch (auf der CD-ROM) aufmerksam durch, um sich
mit der sicheren und efzienten Bedienung vertraut zu machen. Bewahren
Sie dieses Handbuch zum späteren Nachschlagen auf.
Manuel d’installation
Important : Veuillez lire attentivement les PRECAUTIONS, ce Manuel d’installation, ainsi
que le Manuel d’utilisation inclus sur le CD-ROM, pour vous familiariser avec
une utilisation efcace et en toute sécurité. Veuillez conserver ce manuel
pour référence ultérieure.
设定手册
重要事项： 请仔细阅读储存在光盘片中的用户手册、本设定手册和预防措施、以便熟悉安
全有效使用本显示器的信息。请保留本手册、以便今后参考。

Compatible Resolutions/Freguencies Résolutions/Fréquences compatibles
Kompatible Auösungen/Bildwiederholfrequenzen
兼容的分辨率／频率
The monitor supports the following resolutions. Le moniteur est compatible avec les résolutions suivantes.
Der Monitor unterstützt die nachfolgend aufgeführten Auösungen .
本显示器支持下列分辨率。
Analog Input
Resolution Frequency Remarks Dot Clock
640 × 480 ~75 Hz VGA, VESA
135 MHz
(Max.)
720 × 400 70 Hz VGATEXT
800 × 600 ~75 Hz VESA
1024 × 768 ~75 Hz VESA
1152 × 864 75 Hz VESA
1280 × 960 60 Hz VESA
*1280 × 1024 ~75 Hz VESA
Digital Input
Resolution Frequency Remarks Dot Clock
640 × 480 60 Hz VGA
108 MHz
(Max.)
720 × 400 70 Hz VGATEXT
800 × 600 60 Hz VESA
1024 × 768 60 Hz VESA
*1280 × 1024 60 Hz VESA
*Recommended resolution (Set this resolution) *
Résolution recommandée (Réglez votre appareil sur cette résolution)
* Empfohlene Auösung (diese Auösung festlegen) *推荐的分辨率 (设定此分辨率)

1
English
Touch Panel Color LCD Monitor
TroubleshootingSetting/AdjustmentInstallationPrior to use
About Setup Manual and User’s Manual
Setup Manual
(this manual) Describes basic information ranging from connection of the monitor to a
PC to using the monitor.
User’s Manual /
Installation Guide
(PDF le on the CD-ROM*)
Describes the application information of the monitor such as screen
adjustments, settings, and specications.
Describes the installation of the touch panel driver.
PRECAUTIONS Describes how to use the monitor safely.
*Installation of Adobe Reader is required.
• Product specications vary with sales areas. Conrm that the manual is written in the language of the area of purchase.
[Location of Caution Statement]
Copyright© 2009 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information condential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
VESA is a registered trademark or a trademark of Video Electronics StandardsAssociation in the United States and other countries.
EIZO, EIZO Logo, FlexScan and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and other
countries.

2
English
TroubleshootingSetting/AdjustmentInstallationPrior to use
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local dealer.
NOTE
• Please keep the packaging box and materials for future movement or transport of the monitor.
• When installing the touch panel driver, please follow the installation guide on the CD-ROM.
□ Monitor
□ Power Cord
□ Digital Signal Cable: FD-C39
□ Analog Signal Cable: MD-C87
□ Stereo mini-jack Cable
□ EIZO USB Cable : MD-C93
□ EIZO LCD Utility Disk (CD-ROM)
• User’s Manual for Monitor
• Touch Panel Driver
• Installation Guide for Touch Panel Driver
□ Setup Manual (this manual)
□ PRECAUTIONS
□ Limited Warranty
□ Recycling Information
□ Mounting Screws (M4 x 12, 4 pcs.)
Controls and Functions
1
9
10
14131211
15
8765432
Adjustment menu
(*ScreenManager ®)
1 Sensor The sensor detects ambient brightness. Auto EcoView function (page 6)
2EcoView button Displays the setting menu of Auto EcoView and EcoView Index.
3 Volume control button Displays the volume adjustment menu (page 5).
4 Input Signal Selection button Switches input signals for display when two PCs are connected to the monitor.
5Control buttons (Left, Right) • Displays the brightness adjustment window (page 6).
• Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 6).
6 Enter button Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
7Power button Turns the power on or off.
8Power indicator Indicates monitor’s operation status.
Blue: Operating Orange: Power saving Off: Power off
9 Security lock slot Complies with Kensington’s MicroSaver security system.
10 Stand Used to adjust the angle of the monitor screen.
11 Power connector Connects the power cord.
12 Input signal connectors Left: DVI-D connector/Right: D-Sub mini 15-pin connector.
13 USB port (Up) Connects the PC to the monitor with a USB cable.
14 Stereo mini jack Connects the stereo mini jack cable.
15 Speaker Outputs audio source.
* ScreenManager ® is an EIZO’s nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User’s Manual on the CD-ROM.)

3
English
TroubleshootingSetting/AdjustmentPrior to use Installation
Connecting Cables
Attention
• When replacing the current monitor with a T1721 monitor, be sure to change the PC settings for
resolution and vertical frequency to those which are available for the T1721 monitor referring to the
resolution table (back of cover page) before connecting the PC.
NOTE
• When connecting two PCs to the monitor, refer to the User’s Manual on the CD-ROM.
1 Check that the monitor and the PC are powered off.
2 Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Connectors on
the PC
DVI-D connector
D-Sub mini 15-pin
connector
Connectors on
the monitor
DVI-D connector
D-Sub mini 15-pin
connector
Stereo mini jack cable (supplied)
Signal cable MD-C87 (supplied)
Digital connection
Analog connection
CD player, etc
Signal cable FD-C39 (supplied)*1
Audio output
connector Audio input connector
or
USB
Downstream USB
Upstream
USB cable MD-C93 (supplied)*2
*1Do not use the Dual Link cable.
*2Required when used as a touch panel.
3 Plug the power cord into a power outlet and the Power connector on the monitor.

4
English
Prior to use Installation TroubleshootingSetting/Adjustment
Adjusting the Screen Angle
Hold left and right edge of the monitor with both hands, tilt the
screen to the best condition for working.
Attention
• Be sure that the cables are correctly connected.
Displaying the Screen
1Press to turn on the monitor.
The monitor’s power indicator lights up blue.
2 Turn on the PC.
The screen image appears.
When turning on the monitor and PC for the rst time with the analog signal, the Auto Adjustment
function works to adjust the clock, phase, and display position automatically.
Installing the Touch Panel Driver
Attention
• The user account to be used for installing the touch panel driver must have the “Administrators” privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the
driver and then install it.
1 Uninstall the other touch panel driver, if it is installed.
2Install the touch panel driver according to the instructions included in the EIZO
LCD Utility Disk (CD-ROM).
For details, refer to the Installation Guide for Touch Panel Driver on the CD-ROM.
Attention
• Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off power
supply to the monitor. Touch operation is effective until turning off both PC and monitor.

5
English
Prior to use Installation TroubleshootingSetting/Adjustment
Calibrating the Monitor
Calibrate the monitor according to the Installation Guide for Touch Panel Driver on the CD-ROM.
Adjusting Speaker Volume
1Press .
The speaker volume adjustment screen appears.
2 Adjust the speaker volume with or .
Selecting Display Mode
FineContrast allows you to select the best display mode easily according to monitor’s application.
For details of FineContrast, refer to the User’s Manual on the CD-ROM.
FineContrast Mode
Custom Available for making desired setting.
EyeCare Allows the brightness to be set lower than possible with other modes.
sRGB Suitable for color matching with sRGB compatible peripherals.
Text Suitable for displaying texts for word processing or spreadsheets.
1Press .
2 Choose <Color> from the Adjustment menu,
and press .
3 Choose <Color Mode> from the <Color> menu,
and press .
The <Color Mode> menu appears.
4 Select the mode with or ,and press .
The selected mode is set.
Speaker volume adjustment screen
Displays the
current mode.
Color Mode menu

6
English
Prior to use Installation TroubleshootingSetting/Adjustment
The basic settings and adjustments are completed. For advanced settings/adjustments,
refer to the User’s Manual on the CD-ROM.
Adjusting Brightness
1Press or .
The brightness adjustment screen appears.
2 Adjust the brightness with or .
Press to increase screen brightness or press
to decrease.
NOTE
• The sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably with the Auto EcoView function.
For details, refer to the User’s Manual on the CD-ROM.
Performing Advanced Settings/Adjustments
Advanced adjustments for the color and various settings are
available using the Adjustment menu.
For details of each adjustment function, refer to the User’s Manual on
the CD-ROM.
Adjustment menu
Brightness adjustment window

7
English
Prior to use Installation Setting/Adjustment Troubleshooting
No-Picture Problem
If no picture is displayed on the monitor even after the following remedial action is taken, contact your local dealer.
1. Check the Power indicator.
Symptom Status Possible cause and remedy
No picture Power indicator does not light. Check whether the power cord is connected
correctly.
Press .
Power indicator is lighting blue. Set each adjusting value in <Brightness>,
<Contrast> and <Gain>*to higher level.
Power indicator is lighting
orange. Switch the input signal with .
Operate the mouse or keyboard.
Touch the panel surface.
Turn on the PC.
* For the setting of the brightness, contrast and gain, please refer to the User’s Manual on the CD-ROM.
2. Check the error message that remains on the screen.
These messages appear when the input signal is incorrect even if the monitor is functioning.
Symptom Status Possible cause and remedy
The input signal is not received. The message shown left may appear, because
some PCs do not output the signal soon after
power-on.
Check whether the PC is turned on.
Check whether the signal cable is connected
properly.
Switch the input signal with .
The signal frequency is outside
the specication. Incorrect
signal frequency is shown in
red.
Select an appropriate display mode using the
graphics board’s utility software. Refer to the
manual of the graphics board for details.
fD : Dot Clock
(Displayed only when the digital signal
inputs)
fH : Horizontal Frequency
fV : Vertical Frequency

8
English
Memo