Eizo Foris FG2421 User manual

Important
Please read PRECAUTIONS, this User’s Manual, and the Setup Guide
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the Setup Guide for basic information ranging from
connection of the monitor to a PC or external device to using the
monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizo.com
Cover

2
Location of Caution Statement
This product has been adjusted specically for use in the region to which it was originally shipped. If operated
outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are
subject to change without notice.

3
Noticeforthismonitor
Notice for this monitor
This product is suited to purposes like displaying video games and viewing multimedia content.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable when the following are used:
· Power cords provided with the product
· Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the
monitor power has been turned on, and then adjust the monitor.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact
your local EIZO representative.
Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference
patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure
marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until
the dew condensation disappears, otherwise it may cause some damage to the monitor.

4Noticeforthismonitor
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel,
and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
Note
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
The stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to
the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5
CONTENTS
CONTENTS
Cover ...................................................................... 1
Notice for this monitor ......................................... 3
Cleaning .................................................................... 4
To use the monitor comfortably ............................. 4
CONTENTS ............................................................. 5
Chapter 1 Introduction ....................................... 6
1-1. Features ......................................................... 6
1-2. Controls and Functions ............................... 7
1-3. EIZO LCD Utility Disk.................................... 8
●Diskcontentsandsoftwareoverview............. 8
●TouseScreenManagerProforGaming......... 8
1-4. Basic Operations and Functions ................ 9
●BasicSettingmenuoperations....................... 9
●Functions........................................................10
Chapter 2 Adjusting Screens .......................... 11
2-1. Compatible Resolutions/Formats ..............11
2-2. Setting the Resolution ................................12
2-3. Adjusting Color ............................................13
●Toselectthedisplaymode(colormode).......13
●Toperformadvancedadjustments................14
●Adjustablesettingsineachmode..................14
●Toadjustbrightness.......................................15
●Toadjustthebrightnessandcolorofblack..15
●Toadjustcontrast...........................................16
●Toadjustcolortemperature...........................16
●Toadjustgamma............................................17
●Toadjustgain.................................................17
●Tosettheenhancementratioof
ContrastEnhancer..........................................18
●Toreducemotionblur....................................18
2-4. Selecting Screen Size .................................19
●Toselectscreensize......................................19
●Tomodifyblurredcharactersorlines.............19
2-5. Setting Color Space .................................... 20
●Tosetcolorspace......................................... 20
Chapter 3 Setting the Monitor ......................... 21
3-1. Setting the Sound ........................................21
●Toselectthesoundsource............................21
●Toadjustthevolume......................................21
●Toadjustthesoundlevel............................... 22
3-2. Setting the Power Indicator ....................... 22
3-3. Setting the Logo Display on the
Back of the Monitor .................................... 22
3-4. Setting Language ....................................... 23
3-5. Showing and Hiding the EIZO Logo ......... 23
3-6. Changing Setting Menu Display Position 23
3-7. Locking Buttons .......................................... 24
3-8. Changing the Authentication Method for
HDMI Signal Input ....................................... 24
3-9. Resetting to Default .................................... 25
●Toresetthecoloradjustments...................... 25
●Toresetalladjustmentstothedefault
settings.......................................................... 25
Chapter 4 Power Saving Functions ................ 26
4-1. Setting Power Saving ................................. 26
●Monitor.......................................................... 26
4-2. Enabling/Disabling Automatic
Brightness Adjustment .............................. 27
Chapter 5 Connecting Cables ......................... 28
5-1. Connecting Multiple External Devices ..... 28
●Toswitchamonginputsignals...................... 29
5-2. Connecting the External Speaker ............. 29
Chapter 6 Troubleshooting .............................. 30
6-1. No picture .................................................... 30
6-2. Imaging problems ........................................31
6-3. Other problems ........................................... 33
Chapter 7 Reference ........................................34
7-1. Detaching/Attaching the Stand Base ....... 34
7-2. Attaching/Detaching Cable Holder ........... 36
7-3. Making Use of USB (Universal Serial
Bus) ................................................................37
●RequiredSystemEnvironment......................37
●Connectionprocedure(SetupofUSB
function)......................................................... 38
7-4. Showing Monitor Information.................... 39
7-5. Specications ............................................. 40
Chapter 8 Glossary .......................................... 43
Appendix .............................................................. 45
Trademark ............................................................... 45
FCC Declaration of Conformity ............................ 46
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monitor ............................47
Hinweis zur Ergonomie : ........................................47
Recycling Information ........................................... 57
China Measures for RoHS Compliance in
ChinaRoHS ...............................................................61

6Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 23.5″ wide format LCD
• Supports a resolution of 1920 × 1080
• Panel with a wide eld of view adopted
VA panel with 176˚ horizontal and vertical viewing angles
• Compatibility with a vertical scan frequency of 120 Hz delivers high video performance
• Features the Turbo 240 function
This function reduces image blurs (motion blurs) which occur when displaying animated images.
See “To reduce motion blur” (page 18)
• 3 signal input terminals (DisplayPort × 1, DVI-D × 1, HDMI × 1)
- DisplayPort connector (applicable to 8 bit)*1
The DisplayPort input receives both an image signal and an audio signal via a single DisplayPort cable.
*1 When transmitting an audio signal using the DisplayPort cable, the graphics board must be compatible with
audio output (see “7-5. Specications” (page 40)).
- HDMI connector (applicable to 8 bit)
Can handle PC signals in HDMI input
• The Color Mode function allows the user to select the optimum display mode for the displayed image.
The optimum mode for displaying eSports (FPS/RTS) has been incorporated. For details on eSports, FPS and RTS, see
“Chapter 8 Glossary” (page 43).
See “To select the display mode (color mode)” (page 13)
• Stand with wide range of movement
The monitor can be adjusted to a position where it provides you with a comfortable and less tiring work environment.
(Tilt: up 25˚/down 0˚, Swivel: 344˚, Adjustable height: 60 mm (2.36 inch))
• The software “ScreenManager Pro for Gaming” for adjusting the screen using the mouse and keyboard is
included.
See “1-3. EIZO LCD Utility Disk” (page 8)
• Displays HDCP (High-bandwidth Digital Protection) protected content.
• Built-in headphone jack
See “1-2. Controls and Functions” (page 7)
• Line output connector
A speaker with built-in amplier can be connected to the monitor to output sound.
See “5-2. Connecting the External Speaker” (page 29)

7
Chapter 1 Introduction
1-2. Controls and Functions
19
9 10 1311 12
15
14
5 6 7 8 41 2 3
16
17
18
20
Settingmenu*1
1. Ambient light sensor Detectsambientbrightness(AutoEcoViewfunction(page27)).
2. button ChangestheColorMode(page13).
3. button Switchesinputsignalsfordisplay(page29).
DisplayPort→DVI→HDMI
4. button ShowstheSettingmenuorhidesthedisplayedmenu(page9).
5. button Determinesanitemonthemenuscreen,andsavesadjustedvalues(page9).
6. , buttons
• Providesthemenuselectionaswellastheadjustmentandsettingofafunction.
• button: Displaysthevolumeadjustmentmenu(page21).
button: Displaysthebrightnessadjustmentmenu(page15).
7. button Turnsthepoweronoroff.
8. Power Indicator
Indicatesthemonitor’soperationstatus.
Blue: Operating
Orange: Powersavingmode
OFF: Mainpoweroff
9. Input signal
connectors
Left:DisplayPortconnector/Center:DVI-Dconnector/Right:HDMIconnector
ConnectsexternaldevicessuchasaPC.
10. Line input connector (Stereominijack)
ConnectsexternaldevicessuchasaPC.
11. Line output connector (Stereominijack)
Connectsaspeakerwithabuilt-inamplier(page29).
12. Power connector Connectsthepowercord.
13. Main power switch Turnsthemainpoweronoroff.
14. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
15. Handle
Handleusedfortransportation.
Attention
• Firmly grasp and hold the bottom of the monitor while grabbing the handle, and convey the
monitor carefully so as not to drop it.
16. USB port (Down) ConnectsaperipheralUSBdevice.
17. USB port (Up) ConnectstheUSBcabletousesoftwarethatneedsaUSBconnection,ortousethe
USBhubfunction(page37).
18. Headphone jack Connectstheheadphones.

8Chapter 1 Introduction
19. Stand Adjuststheheightandangle(tiltandswivel)ofthemonitor.
20. Cable holder Coversthemonitorcables.
*1 See “Basic Setting menu operations” (page 9) for how to use.
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents
and the overview of the software programs.
●Disk contents and software overview
The disk includes application software programs for adjustment, and the User’s Manual. Refer to the Readme.
txt le on the disk for software startup procedures or le access procedures.
Contents Overview Windows Macintosh
ScreenManagerProforGaming Thisissoftwareforadjustingthescreen
usingthemouseandkeyboard.Connect
themonitortothePCwiththesuppliedUSB
cablebeforeinstallation.
√ -
User’sManualforthismonitor(PDFle) √ √
Readme.txtle √ √
●To use ScreenManager Pro for Gaming
For the installation and use of “ScreenManager Pro for Gaming”, refer to the respective User’s Manuals on the
disk.

9
Chapter 1 Introduction
1-4. Basic Operations and Functions
●Basic Setting menu operations
1. Displaying the Setting Menu
1. Press . The Setting menu appears.
2.
Adjusting/Setting
1. Choose the menu to adjust/set with , , and then press . The Sub menu appears.
2. Choose an item to adjust/set with , , and then press . The adjustment/ setting menu appears.
3. Adjust/set the selected item with , , and then press .
3.
Exiting the software
1. Press .

10 Chapter 1 Introduction
●Functions
The following table shows the Setting menu and the setting items of each menu.
Main Menu Item Reference
Color Brightness “2-3.AdjustingColor”(page13)
BlackLevel
Contrast
Temperature
Gamma
AdvancedSettings Gain*1
ContrastEnhancer
Turbo240*2
ColorReset “3-9.ResettingtoDefault”(page25)
Screen ScreenSize “2-4.SelectingScreenSize”(page19)
ColorSpace*3 “Tosetcolorspace”(page20)
Smoothing “Tomodifyblurredcharactersorlines”
(page19)
Sound Source*3 “Toselectthesoundsource”(page21)
SoundLevel “Toadjustthesoundlevel”(page22)
PowerManager PowerSave “4-1.SettingPowerSaving”(page26)
MonitorSettings AutoEcoView “4-2.Enabling/DisablingAutomatic
BrightnessAdjustment”(page27)
PowerIndicator “3-2.SettingthePowerIndicator”
(page22)
RearLogoLight “3-3.SettingtheLogoDisplayonthe
BackoftheMonitor”(page22)
Language “3-4.SettingLanguage”(page23)
MenuSettings Logo “3-5.ShowingandHidingtheEIZO
Logo”(page23)
MenuPosition “3-6.ChangingSettingMenuDisplay
Position”(page23)
Reset “3-9.ResettingtoDefault”(page25)
Information “7-4.ShowingMonitorInformation”
(page39)
*1 This function can be adjusted with User1, User2, and User3.
*2 This function can be adjusted with User1, User2, User3, and RTS.
*3 These functions are not available with DVI signal input.

11
Chapter 2 Adjusting Screens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions/Formats
The monitor supports the following resolutions and signal format.
Digital Input (PC signal: DisplayPort, DVI-D, HDMI)
Resolution Vertical scan frequency DisplayPort DVI HDMI
640×480 60Hz √ √ √
640×480 75Hz √ √ √
640×480 100Hz √ - √
640×480 120Hz √ √ √
720×400 70Hz √ √ √
800×600 60Hz √ √ √
800×600 75Hz √ √ √
800×600 100Hz √ - √
800×600 120Hz √ √ √
1024×768 60Hz √ √ √
1024×768 75Hz √ √ √
1024×768 100Hz √ - √
1024×768 120Hz √ √ √
1280×720 60Hz √ √ √
1280×960 60Hz - √ -
1280×1024 60Hz √ √ √
1280×1024 75Hz √ √ √
1280×1024 120Hz - √*1 -
1920×1080*2 60Hz √ √ √
1920×1080 100Hz √ √*1 -
1920×1080 120Hz √ √*1 -
AgraphicsboardconformingtotheVESAandCEA-861standardsisrequired.
*1 It must be connected with a DD200DL DVI Dual Link cable (option).
*2 Recommended resolution
Digital Input (Video signal: DisplayPort, HDMI)
• Video signal
Format Vertical scan frequency DisplayPort HDMI
640×480 60Hz √ √
480i 60Hz - √
480p 60Hz √ √
576i 50Hz - √
576p 50Hz √ √
720p 50Hz/60Hz √ √
1080i 50Hz/60Hz - √
1080p 24Hz - √
1080p 50Hz/60Hz √ √
• Audio signal
- 2ch linear PCM (32 kHz / 44.1 kHz / 48 kHz)

12 Chapter 2 Adjusting Screens
2-2. Setting the Resolution
If you nd that the resolution is inappropriate when you connect the monitor to the PC, or if you want to change the
resolution, follow the procedure below.
Windows 8 / Windows 7
1. For Windows 8, click the “Desktop” tile on the Start Screen to display the desktop.
2. Right-click the mouse anywhere on the desktop except for icons.
3. From the displayed menu, click “Screen resolution”.
4. In the “Screen Resolution” dialog box, select the monitor.
5. Click “Resolution”, and then select the desired resolution.
6. Click the [OK] button.
7. When the conrmation dialog box is displayed, click [Keep changes].
Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. In the “Personalization” window, click “Display Settings”.
4. In the “Display Settings” dialog box, select the “Monitor” tab and select the desired resolution in the
“Resolution” eld.
5. Click the [OK] button.
6. When the conrmation dialog box is displayed, click [Yes].
Windows XP
1. Right-click the mouse anywhere on the desktop except for icons.
2. In the displayed menu, click “Properties”.
3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select the desired
resolution at “Screen resolution” under “Display”.
4. Click the [OK] button to close the dialog box.
Mac OS X
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. In the displayed dialog box, select the “Display” tab and select the desired resolution in the “Resolutions”
eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution, close the
window.

13
Chapter 2 Adjusting Screens
2-3. Adjusting Color
●To select the display mode (color mode)
This function allows easy selection of the desired mode according to the monitor application.
Display Modes
Mode Purpose
User1 Selectthistodeneadesiredsetofparametersettings.
User2
User3
FPS1 SuitedtothedisplayofFPSgames
FPS2
RTS SuitedtothedisplayofRTSgames
Web Suitedtodisplayingwebbrowsers
Themodemenu
appears.
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The next mode in the list is highlighted each time is pressed.
You can switch the mode with or while the mode menu is displayed.
→User1←→User2←→User3←→FPS1←→FPS2←→RTS←→Web←
Note
• The Setting menu and Mode menu cannot be displayed at the same time.
• “ScreenManager Pro for Gaming” allows you to select the Color mode automatically according to the application used.
For details, refer to the User’s Manual of the ScreenManager Pro for Gaming.

14 Chapter 2 Adjusting Screens
●To perform advanced adjustments
The “Color” menu of the Setting menu allows you to set and save the independent color adjustment for each
mode.
Attention
• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the
monitor power has been turned on, and then adjust the monitor.
• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.
Make ne color adjustment visually when matching colors on multiple monitors.
Note
• Using the “ScreenManager Pro for Gaming” allows you to perform the color adjustment by using the mouse and
keyboard of your PC. It is also possible to save adjustment statuses in a le and to read them. For details, refer to the
User’s Manual of the ScreenManager Pro for Gaming.
●Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
For instructions on how to adjust or set each function, refer to subsequent pages.
√: Adjustable -: Not adjustable
Function
Color Mode
User1
User2
User3
FPS1
FPS2 RTS Web
Brightness √ √ √ √
BlackLevel √ √ √ √
Contrast √ √ √ √
Temperature √ √ √ √
Gamma √ √ √ √
Advanced
Settings
Gain √ - - -
ContrastEnhancer √ √ √ √
Turbo240 √ - √ -
ColorReset √ √ √ √

15
Chapter 2 Adjusting Screens
●To adjust brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back
panel).
Adjustable Range
0 to 100
Procedure
1. Press .
The Brightness menu appears.
2. Use or for adjustment.
3. Press to exit.
Attention
• Even if the brightness value is the same, the brightness of the screen will differ depending on the “Turbo 240” setting.
When “Turbo 240” is turned “ON”, the screen goes darker (see “To reduce motion blur” (page 18)).
Note
• If you feel that the image is too bright even if the brightness is set to 0 or that the image is too dark even if the
brightness is set to 100, adjust the contrast.
• Alternatively, you can use “Brightness” under “Color” in the Setting menu to adjust it.
●To adjust the brightness and color of black
The brightness of black can be adjusted. Display the black test pattern or background and then adjust the black
level.
Adjustable Range
0 to 100
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Black Level” from the “Color” menu, and press .
The “Black Level” menu appears.
3. Use or for adjustment.
4. Press to exit.
Note
• After completing black level adjustment, readjust the contrast as appropriate.

16 Chapter 2 Adjusting Screens
●To adjust contrast
The luminance of the screen is adjusted by varying the video signal level.
Adjustable Range
0 to 100
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Contrast” from “Color”, and press .
“Contrast” appears.
3. Use or for adjustment.
4. Press to exit.
Note
• In the contrast of 50, every color gradation is displayed (for PC input signal only).
• When adjusting the monitor, you are recommended to perform the brightness adjustment, which will not cause the
gradation characteristics to be lost, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is too dark even if the brightness is set to 100 (Set the contrast to higher than 50.)
- When you feel the image is too bright even if the brightness is set to 0 (Set the contrast to 50 or lower.)
●To adjust color temperature
The color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” with a numerical value.
The value is expressed in Kelvins (K).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame
temperature. The gain preset values are set for each color temperature setting value.
Adjustable Range
Off, 5000K, 6500K, 8000K, 9300K
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Temperature” from “Color”, and press .
The “Temperature” menu appears.
3. Use or for adjustment.
4. Press to exit.
Note
• The value shown in “K” is available only as reference.
• “Gain” allows you to perform more advanced adjustment (see “To adjust gain” (page 17)).
• If you set “Off”, the image is displayed in the preset color of the monitor (Gain: 100 for each RGB).
• When gain is changed, the color temperature is changed to “Off”.

17
Chapter 2 Adjusting Screens
●To adjust gamma
The gamma value can be adjusted. The brightness of the monitor varies depending on the input signal.
However, the variation rate is not proportional to the input signal. Keeping the balance between the input signal
and the brightness of the monitor is called as “Gamma correction”.
Adjustable Range
Settings Purpose
1.8,2.0,2.2,2.4,2.6 Setthegammavalue.
FPS(High),FPS(Medium),FPS(Low) ThesesettingsareapplicabletothedisplayofFPSgames,andmake
thelow-tonepartsofthescreenbrighter.“FPS(High)”isthebrightest
setting.
RTS ThissettingisapplicabletothedisplayofRTSgames.
Power Theimageswillbesharpenedbyincreasingthehalftonecontrast.
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Gamma” from “Color”, and press .
The “Gamma” menu appears.
3. Use or for adjustment.
4. Press to exit.
●To adjust gain
The brightness of each color component - red, green, and blue - is called Gain. You can change the hue of
“white” by adjusting gain.
Adjustable Range
0 to 100
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Gain” from the “Advanced Settings” menu, and press .
The “Gain” menu appears.
4. Adjust gain with or for each of red, green, and blue.
5. Press to exit.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of the gain changes with that of color temperature.
• When the gain is changed, the color temperature is changed to “Off”.

18 Chapter 2 Adjusting Screens
●To set the enhancement ratio of ContrastEnhancer
This function allows you to automatically adjust the contrast according to the darkness or brightness of an
image and change in scenes. You can set the level of the adjustment.
Adjustable Range
Enhanced, Standard, Off
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “ContrastEnhancer” from the “Advanced Settings” menu, and press .
“ContrastEnhancer” appears.
4. Use or for adjustment.
5. Press to exit.
Attention
• Using this function may make some color gradations unavailable for display.
●To reduce motion blur
Reduces image blurs (motion blurs) which occur when displaying animated images.
Motion blur occurs when the eye recognizes liquid crystal transitions which come from changing screens
(frames). When “Turbo 240” is set to “On”, the backlight ickers in sync with liquid crystal transition*1 so the
change cannot be seen, thereby achieving clear images with less blur.
*1 This monitor converts 120 Hz input signals into 240 Hz within the panel, and doubles the refresh rate to draw two
images per frame. At the rst display the screen is refreshed, and at the second display the screen is displayed
correctly. When “Turbo 240” is set to “On”, the backlight is turned off for the rst display.
Procedure
1. Choose “Color” from the Setting menu, and press .
2. Choose “Advanced Settings” from “Color”, and press .
3. Choose “Turbo 240” from the “Advanced Settings” menu, and press .
The “Turbo 240” menu appears.
4. Select “On” or “Off” with or , and press .
5. Press to exit.
Attention
• When the Turbo 240 setting is changed, the screen is not displayed for about a second.
• Eye fatigue may occur if the eye senses the ickering of the backlight. In such a case, turn the setting to “Off”.
• When the “Turbo 240” setting is “On”, the screen is less bright than when the setting is “Off”.
• When the color mode is “FPS1” or “FPS2”, the “Turbo 240” setting is xed as “On”.
• When the color mode is “Web”, the “Turbo 240” setting is xed as “Off”.
Note
• The Turbo 240 setting is displayed on the “Information” screen. Refer to “7-4. Showing Monitor Information” (page 39)
for details.

19
Chapter 2 Adjusting Screens
2-4. Selecting Screen Size
●To select screen size
An image with a resolution other than the recommended resolution is displayed in full screen automatically.
You can change the screen size by using the “Screen Size” function.
Settings Function
Auto Themonitorautomaticallychangesthescreensizeaccordingtotheaspectratioand
resolutioninformationfromtheexternaldevice.Thissettingcanbeselectedwhenthe
inputisHDMI(videosignal).
FullScreen Imagesarestretchedtofullscreen.Sinceaspectratiosvary,imagesmaybedistortedin
somecases.
Enlarged Imagesareenlargedtofullscreenwithoutchangingtheaspectratio.Sinceaspectratios
aremaintained,blankhorizontalorverticalbordersmayappear.
Normal Displaysimageswiththespeciedresolution.
Example: Image size 1024 × 768
FullScreen Enlarged Normal
(1920×1080) (1440×1080) (1024×768)
Procedure
1. Choose “Screen” from the Setting menu, and press .
2. Choose “Screen Size” from “Screen”, and press .
The “Screen Size” menu appears.
3. Use or for adjustment.
4. Press to exit.
●To modify blurred characters or lines
When an image is displayed with a resolution other than that recommended, the characters or lines of the
displayed image may blur.
Attention
• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)
Adjustable Range
1 to 5
Procedure
1. Choose “Screen” from the Setting menu, and press .
2. Choose “Smoothing” from the “Screen” menu, and press .
The “Smoothing” menu appears.
3. Use or for adjustment.
4. Press to exit.

20 Chapter 2 Adjusting Screens
2-5. Setting Color Space
●To set color space
The color space of the input signal can be specied. Set to other than “Auto” if this product cannot display
correct color.
√: Can be set -: Cannot be set
Settings Function DisplayPort DVI-D
HDMI
(PC
signal)
HDMI
(video signal)
Auto Identiesthecolorspaceoftheinput
signalautomatically(recommended). √ - - √
YUV Convertsthecolorspaceofthe
inputsignaltoaYUVformat.Make
thissettingifthescreencolorisnot
correctwhen“Auto”isset.
√ - - -
YUV4:2:2 Convertsthecolorspaceoftheinput
signaltoaYUV4:2:2format.Make
thissettingifthescreencolorisnot
correctwhen“Auto”isset.
- - √ √
YUV4:4:4 Convertsthecolorspaceoftheinput
signaltoaYUV4:4:4format.Make
thissettingifthescreencolorisnot
correctwhen“Auto”isset.
- - √ √
RGBFull
Range
Convertsthecolorspaceoftheinput
signaltoaRGB(0to255)format.
Makethissettingifthescreencoloris
notcorrectwhen“Auto”isset.
√ √*1 √ √
RGBLimited
Range
Convertsthecolorspaceoftheinput
signaltoaRGB(16to235)format.
Makethissettingifthescreencoloris
notcorrectwhen“Auto”isset.
√ - √ √
*1 The color space for DVI input will always be “RGB Full Range”.
Procedure
1. Choose “Screen” from the Setting menu, and press .
2. Choose “Color Space” from “Screen”, and press .
The “Color Space” menu appears.
3. Use or for adjustment.
4. Press to exit.
Attention
• The setting is required when a DVI device is connected to the monitor (at the HDMI connector port) using the DVI-
HDMI conversion connector.
• Even if “Auto” is set, correct color might not be displayed. If this happens, change the setting to one where the screen is
displayed correctly.