Elation 5R SNIPER User manual

5R SNIPER STAGE LIGHT
USER MANUAL
KEEP THIS MANUAL FOR FUTURE NEEDS

2
Thank you for your patronage. We are confident that our excellent products and service can
satisfy you. For your own safety, please read this user manual carefully before installing the
device.
In order to install, operate, and maintain the lighting safety correctly. We suggest that the
installation and operation should be done by the verified technician and follow the instruction
strictly.
ACAUTION!
Keep this device away from rain and moisture!
CAUTION!
Unplug mains lead before opening the housing.
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow carefully the instructions of this manual
INTRODUCTION:
Thank you for having chosen this professional moving head.
You will see you have acquired a powerful and versatile device.
Unpack the device. Inside the carton box you should find:
1. One power cable
2. One user manual
（Flight case, Safety cable and Clamps are optional, please contact your dealer）
Please check carefully that there is no damage caused by transportation. Should there be any,
please consult your dealer and don’t install this device.
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires!
This device has left the factory in perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
1. In order to guarantee the product’s life, please don’t put it in the damp places or even the
environment over 60degress.
2. Always mount this unit in safe and stable matter.
The qualified professionals are allowed to carry out the lamp installation, operation and
maintenance, but they must guarantee to operate in strict accordance with the instructions
referred to.

3
3. Using lamp, the change rate of power voltage should be within±10%, if the voltage is too
high, it will shorten the light’s life; if it’s not enough, the lamp will be dark.
4. Please restart it after turning off light for 20 minutes until full-cooling. Frequent switching
will reduce the life span of lamps and bulbs; intermittent using will improve the life of bulbs
and lamps.
▲Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems.
If the device has been exposed to temperature changes due to environmental changes, do not
switch it on immediately. The arising condensation could damage the device. Leave the
device switched off until it has reached room temperatures.
This device falls under protection-classⅠ. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the
case, replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull out the plug by tugging the power cord.
During initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective, it should decrease gradually.
Please don’t project the beam onto combustible substances.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order to
avoid a hazard.
CAUTION!
Never touch the device during operation!
The housing may heat up!
CCAUTION!
NNever look directly into the light source,
AAs sensitive persons may suffer an epileptic shock.
CLEANING AND MAINTENANCE
1. To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
2. Do not spill water or other liquids into or on to your unit.
3. During long periods of non-use, disconnect the unit’s main power.

4
4. It should be installed in a well-ventilated place, at a distance of 50 centimeters or more
with the walls. At the same time, please check if the fan and ventilation holes are
unobstructed.
The following points have to be considered during the inspection
1) All screws for installing the devices or parts of the device have to be tightly connected
and must not be corroded.
2) There must not be any deformations on the housing, color lenses. Fixations and
installations spots(ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4) The electric power supply cables must not show any damage, material fatigue or
sediments. Further instructions depending on the installation spot and usage have to be
adhered by a skilled installer and any safety problems have to be removed.
CAUTION!
Disconnect from mains before starting maintenance operation!
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakness of the lights due to
accumulation of dust.
2) Clean the fan each week.
3) To make sure the smooth gobo rotation, we suggest adding proper lube to the wheel each
three month, avoiding the excessive lube splashes during the gobo rotating,
4) A detailed electric check by approved electrical engineer each three month, make sure
that the circuit contacts are in good condition, prevent the poor contact of circuit from
overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never
use alcohol or solvents.
There are no serviceable parts inside the device except for the lamp. Please refer to the
instructions under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
TECHNICAL PARAMETERS
POWER SUPPLIE
Input power:110-240V 50/60 Hz

5
LAMP SOURCE
Discharge lamp with a short arc burner in a reflector system
- Type: 5R , 200W
- Output Lamp power: 350 W
- Color temperature: 8,000 K
COLOR SYSTEM
Color wheel: one color wheel, 14 kinds of color chips in one color wheel
EFFECTS SECTION
Interchangeable gobo wheel with 17 fixed gobos
High speed shake effect,3-face rotating prism
Mechanical shutter and adjustable speed strobe effect
Mechanical dimmer
CONTROL AND PROGRAMMING
Channel mode :14 and 20 DMX 512 control channels
LCD display
DMX signal connection: 3 PIN
BODY
Aluminium structure with die-cast plastic cover.
IP level :IP20
Magnetic ballast and AC/Dc power supply
Packing Size: 45*41*37 cm
N.W:10 KG
G.W:11KG

6
LCD TOUCH SCREEN DISPLAY MENU
DMX Address
001~512
Run Mode
DMX 14 Channel
DMX 20 Channel
Auto Run
Perform Mode 1
Perform Mode 2
Perform Mode 3
Perform Mode 4
Perform Mode 5
Perform Mode 6
Perform Mode 7
Perform Mode 8
Sound Control
Master Auto Run
Perform Mode 1
Perform Mode 2
Perform Mode 3
Perform Mode 4
Perform Mode 5
Perform Mode 6
Perform Mode 7
Perform Mode 8
Master Sound
Control
Slave run
Language Setting
简体中文
English
Advanced Setup
Pan Reverse
Tilt Reverse
Display Reverse
Reset Motor
Factory Set
Home Position
Set
Password
Code
=018
PAN
.=000
TILT
.=000
Off-Center Mirror
.=000
Color
.=000
Gobo
.=000
Strobe
.=000

7
Prism
.=000
Mic Sensitive
= 000
System State
Current Time
Total Time
Run Mode
Software Version
Manual Control
PAN
.=000
TILT
.=000
X Shaking
.=000
Y Shaking
.=000
Color
.=000
Gobo
.=000
Pattern
.=000
Pattern Rotation
.=000
Pattern Variant
.=000
Pattern Zoom
.=000
Off-Center
Mirror
.=000
Prism
.=000
Prism Rotation
.=000
Dimmer
.=000
Strobe
.=000

8
DMX Channel
14 channel mode
Channel
DMX Value
Function
1
000 - 127
Pan
128-255
Pan-Shaking Slow To Fast
2
000 - 127
Tilt
128-255
Tilt-Shaking Slow To Fast
3
000-004
OPEN(White)
005-009
White/Color1
010-014
Color1
015-019
Color1/Color2
020-024
Color2
025-029
Color2/Color3
030-034
Color3
035-039
Color3/Color4
040-044
Color4
045-049
Color4/Color5
050-054
Color5
055-059
Color5/Color6
060-064
Color6
065-069
Color6/Color7
070-074
Color7
075-079
Color7/Color8
080-084
Color8
085-089
Color8/Color9
090-094
Color9
095-099
Color9/Color10
100-104
Color10
105-109
Color10/Color11
110-114
Color11
115-119
Color11/Color12
120-124
Color12
125-129
Color12/Color13
130-134
Color13
135-139
Color14
140-195
Forward rotation from fast to slow

9
196-199
Stop
200-255
Backward rotation from slow to fast
4
000-007
OPEN(White)
008-014
Gobo1
015-022
Gobo2
023-029
Gobo3
030-037
Gobo4
038-044
Gobo5
045-052
Gobo6
053-059
Gobo7
060-067
Gobo8
068-074
Gobo9
075-082
Gobo10
083-089
Gobo11
090-097
Gobo12
098-104
Gobo13
105-112
Gobo14
113-119
Gobo15
120-126
Gobo16
127-133
Gobo17
134-194
Forward rotation from fast to slow
195-255
Backward rotation from slow to fast
5
000-008
empty
009-034
Pattern Macro 1
035-059
Pattern Macro 2
060-084
Pattern Macro 3
085-109
Pattern Macro 4
110-134
Pattern Macro 5
135-159
Pattern Macro 6
160-184
Pattern Macro 7
185-209
Pattern Macro 8
210-234
Pattern Macro 9
235-255
Pattern Macro 10
6
000-009
Empty
010-125
Pattern Forward rotation from fast to slow
126-141
Empty
142-245
Pattern Backward rotation from slow to fast
246-255
Empty
7
000-009
Empty

10
010-120
Pattern Horizontal rotation from fast to slow
121-123
Empty
135-245
Pattern Vertical rotation from slow to fast
246-255
Empty
8
000-127
Pattern Zoom Manual
128-255
Pattern Zoom from slow to fast
9
000-063
BEAM ROTATION 0-360°
064-127
BEAM ROTATION Shaking
128-189
BEAM ROTATION Forward Rotation from fast to slow
190-193
Stop
194-255
BEAM ROTATION Backward Rotation from slow to
fast
10
000-007
Prism OFF
008-255
Prism ON
11
000-009
Stop
010-129
Prism Forward Rotation from fast to slow
130-134
Stop
135-255
Prism Backward Rotation from slow to fast
12
000-009
Shutter closed
010-250
Strobe effect slow to fast
251-255
Shutter open
13
000-255
Dimmer(0-100%)
14
040-059
Lamp ON
060-079
Lamp OFF
200-209
Reset Motor
20 channel mode
Channel
DMX Value
Function
1
000-255
Pan
2
000-255
Pan-Fine
3
000-255
Tilt
4
000-255
Tilt-Fine
5
000-255
Pan-Shaking Slow To Fast
6
000-255
Tilt-Shaking Slow To Fast
7
000-004
OPEN(White)
005-009
White/Color1