Electric Eel C User manual

! ! DANGER ! !
Proudly Made in The USA Since 1939

Safety Instructions
DANGER
TO PREVENT SERIOUS BODILY INJURY AND
AVOID DANGER FROM ROTATING CABLES
AND EQUIPMENT:
DANGER
TO AVOID SERIOUS BODILY INJURY AND TO
AVOID DANGER FROM ELECTRICAL SHOCK:
DANGER

OPERATOR MUST BE THOROUGHLY FAMILIAR
WITH ALL SAFETY INSTRUCTIONS BEFORE
OPERATING THIS EQUIPMENT.
DANGER
1. ALWAYS use a ground fault interrupted circuit with a properly
grounded outlet for all electrical cords, connections and parts as
installed by the factory. DO NOT make any alterations.
2. NEVER use machine while standing in damp or wet conditions.
3. NEVER expose machine to rain.
4. THE USER SHOULD NEVER ATTEMPT TO SERVICE THE ELECTRICAL
COMPONENTS. For safety reasons all electrical replacement
components should be installed by a qualified electrician.
5. BEFORE MAKING ADJUSTMENTS OR CHANGES TO POWER UNITS,
DISCONNECT FROM ELECTRICAL SOURCE>
DANGER
TO AVOID SERIOUS BODILY INJURY AND TO AVOID
DANGER FROM ELECTRIC SHOCK:
GENERAL SAFETY - ELECTRICAL

WARNING!
DO NOT HANDLE
ROTATING CABLE