Electro-Voice EVID MA-3 User manual

EVID 3.2 SOS Monitor and MA-3 Mic Stand Adapter
The EVID 3.2 SOS is a near-field monitor with volume control and
¼ in ut jack that can be easily mounted on a micro hone stand
for convenient lacement anywhere. An adjustable swivel lets you
mount it at exactly the right angle for any a lication.
MA-3 Mic Stand Ada ter kit lets you mount any standard EVID 3.2
on a micro hone stand for easy lacement anywhere you need it.
MA Series
SOS 3.2 Series
Assembly Instructions
Mic Stand Mounting (MA-3 and SOS)
:sedulcnItiK3-AM
metIytQnoitpircseD
11 retpadAdnatSciM
21 retpadAmooB
32 ).D.I"52.,.D.O"88.(rehsaWtalF
:sedulcnIrotinoMSOS2.3DIVE
metIytQnoitpircseD
11 retpadAdnatSciM
21 retpadAmooB
32 ).D.I"52.,.D.O"88.(rehsaWtalF
41 kcaJ"4/1htiw,rotinoM2.3DIVE
51 tnuoMenohporciMfoorP-kcohS
Step 1:
Attach the Mic Stand Ada ter (Item 1) to
your micro hone stand (not included).
Step 2:
Attach the EVID 3.2 (or the 3.2 SOS) to the
Mic Stand Ada ter using one flat washer
(Item 3) in-between the Ada ter and the
EVID.
Step 3:
Use the adjustment knob to adjust the angle
of the EVID.
If not attaching a boom to the EVID, attach
Logo Ca as shown.
Item 1
Item 4 Item 3
Adjustment
Knob
Logo Cap
(Included with
standard EVID 3.2)

Part Number 38110-087 Rev A © Telex Communications, Inc. 1/2002
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
800/392-3497 Fax: [phone]
Europe, Africa and Middle East only. For customer orders,
contact the Customer Service department at
49 9421-706 0 Fax: [phone]
For warranty information, contact the Service Repair department at:
616/695-6831 or 800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone: [phone], Fax: [phone]
www.electrovoice.com
© Telex Communications, Inc. 1/2002
Mounting a Microphone and Boom to your EVID (MA-3 and SOS)
Step 1:
Attach the Boom Ada ter (Item 2) to the to
of the EVID with a flat washer (Item 3) in
between the Ada ter and the EVID.
Step 2:
Mount the Boom (Not Included) to the Boom
Ada ter (Item 2).
Step 3:
Re lace any micro hone mount with the
Shock-Proof Mic Mount (Item 5, EVID 3.2
SOS only).
Item 1
Item 4
Item 3
Item 2
Item 5
(Included only with
EVID 3.2 SOS
Monitor Package)
Boom
(Not Included)
EVID 3.2 SOS Rear Panel Detail
1/4” Input Jack
Volume Control Knob