Electrohome RR75 User manual

RR75 7-in-1 Vinyl Record Player
User Manual v1.0

2
INTRODUCTION
Since 1907 Electrohome has been developing high fidelity audio products & has been welcomed
into homes for generations. One thing that remains the same in our more than 100 year history is
our unmatched dedication to design and premium craftsmanship.
Thank you for your purchase of this Electrohome® product.
We hope you enjoy your experience.
Questions?
Give us a chance to help, we’re just a click away.
Electrohome.com/resources
Electrohome.com/videos
Electrohome.com/support
Electrohome.com/contact
Don’t forget to register your product with us!
Electrohome.com/registration

3
TABLE OF CONTENTS
WHAT’S INCLUDED
• 7-in-1 Vinyl Record Player
• 45 Adapter
• Power Cable
• Remote Control
• 2 ‘AAA’ Batteries
• Quick Start Guide
• User Manual
• 1 Year Warranty
• Lifetime Customer Support
What’s Included .................................................................................................................................... 3
Product Information............................................................................................................................. 4
Front Panel ..........................................................................................................................................................................4
Back Panel............................................................................................................................................................................4
Remote Control .................................................................................................................................................................5
Turntable..............................................................................................................................................................................5
First Time Setup .................................................................................................................................... 6
Positioning the System...................................................................................................................................................6
Connecting to Power.......................................................................................................................................................6
Turning the Unit ON/OFF...............................................................................................................................................7
Changing Sources.............................................................................................................................................................7
Adjusting the EQ Settings..............................................................................................................................................7
Playing a Record................................................................................................................................................................7
Adjusting the Volume......................................................................................................................................................7
Playing the Radio and Radio Presets .........................................................................................................................8
Playing From a Bluetooth® Device..............................................................................................................................8
Playing from an AUX Device.........................................................................................................................................8
Playing a CD........................................................................................................................................................................8
Playing from USB ..............................................................................................................................................................9
Recording to USB..............................................................................................................................................................9
Recording from PHONO/AUX/Bluetooth® ...............................................................................................................9
Recording from CD...........................................................................................................................................................9
Connecting Headphones............................................................................................................................................ 10
Connecting to an Amplifier........................................................................................................................................ 10
Care and Maintenance ....................................................................................................................... 11
Cleaning the System..................................................................................................................................................... 11
Stylus Care........................................................................................................................................................................ 11
Replacing the Stylus ..................................................................................................................................................... 11
Record Care...................................................................................................................................................................... 11
Frequently Asked Questions ............................................................................................................. 12
Specications...................................................................................................................................... 14
Certication Information ................................................................................................................... 15
Important Safety Instructions........................................................................................................... 16
Warranty Information ........................................................................................................................ 18

4
PRODUCT INFORMATION
Front Panel
1. Standby Knob
Press - Power ON/OFF
Turn - Volume UP/DOWN
2. Previous Track/Rewind/Tuning
3. Play/Pause
4. Next Track/Fast Forward/Tuning
5. LCD Screen
6. EQ Settings - Bass/Treble
7. Bluetooth® Pairing LED
Solid - Paired
Flashing - Pairing Mode
8. Bluetooth®
Tap - Bluetooth Source
Hold - Reset Bluetooth Pairing
9. Recording LED
Flashing - Recording
10. USB Recording
11. Source Knob
Press - Source
Turn - AM/FM Tuning
12. Headphone Jack
13. USB Port - Recording/Playback
14. AM/FM Presets - Cycle/Set
Play Mode - Repeat/Shuffle
15. CD Eject
16. CD Tray
Back Panel
1. FM Antenna
2. 3.5 mm Aux Audio Input
3. RCA Audio Output
4. Power Switch
5. Power Input
STANDBY
AC 120V
ON
OFF
1
2 3 4 5
11
2
12 13
14
1
15
3 4 6 7
8 10
95
16

5
Turntable
Remote Control
1. Power
2. Source Selection
3. Up/Down Arrow (Preset/Folder)
4. Play/Pause
5. Left/Right Arrow (Tuning/Track)
6. EQ Settings – Bass/Treble
7. AM/FM Presets - Cycle/Set
Play Mode - Repeat/Shuffle
8. Bluetooth®
Tap - Bluetooth Source
Hold - Reset Bluetooth Pairing
9. Volume Up/Down
1. 45 Adapter
2. Platter
3. Transit Screw
4. Cueing Lever
5. Tonearm Lock
6. Speed Selection Switch
7. Tonearm
8. Stylus
9. Spindle
1
6
2
4
5
8
7
6
8
4
5
9
3
7
1
2
9
3

6
FIRST TIME SETUP
Positioning the System
1. Unpack the system and remove
all protective packaging. Please
keep packaging for warranty and
transportation purposes.
Connecting to Power
Connect the power cable to the power input on the back of the system and connect the other end of
the power cable to a power outlet. Set the power switch on the back of the unit to the ON position.
2. Place the system on a sturdy and level surface.
4. Extend the FM antenna and position for
optimal FM reception.
3. Open the lid and turn the Transit Screw
Clockwise to release the turntable for
playback.
DOWN
for playback
UP
for transport
ON
OFF
AC20V
ON
OFF

7
Turning the Unit ON/OFF
Press the STANDBY knob on the unit or POWER
button on the remote control to turn the unit
on or off.
Note: Ensure the power switch on the back of the unit is
set to ON.
Adjusting the EQ Settings
1. Press EQ on the unit or the remote to enter EQ Settings starting with Bass
2. Use or on remote or turn the TUNING knob on the unit to adjust the EQ value (-3 to +3)
3. Press EQ to change to EQ settings for Treble
4. Use or on remote or turn the TUNING knob on the unit to adjust the EQ value (-3 to +3)
5. Press EQ again to exit the EQ Settings
Playing a Record
1. Change to PHONO source
2. Lift the lid and lock the hinge to secure it
in place
3. Place a record on the turntable platter
4. Ensure the transit screw is fully lowered
5. Set the speed selection switch to match
your record
6. Remove the stylus protector from the stylus
on the end of the tonearm
7. Unlock the tonearm lock
8. Raise the cueing lever to lift the tonearm
9. Position the tonearm over the record
Adjusting the Volume
Turn the STANDBY knob on the unit or press
VOLUME +/- on the remote control to raise or
lower the volume on the system.
IMPORTANT: When playing music from an external source,
such as a smartphone, ensure the volume is adjusted on
it as well.
10. Lower the cueing lever to lower the
tonearm to the record
11. The turntable will automatically stop
spinning at the end of the record
12. Once playback is complete return the
tonearm to the tonearm rest and lock
in place
13. To close the lid, lift the lid to unlock the
hinge and pull the hinge toward you
allowing the lid to fully lower
See page 9 for steps on Recording from the turntable.
Changing Sources
Press the SOURCE knob on the unit or SOURCE button on the remote control to change sources. The
selected source will be shown on the display.
PHONO AUX CD USB BT FM AM
PHONO
Note: The RR75 features an auto stop function but does not have an automatic tonearm return function.
The tonearm must be manually returned to the tonearm rest. The auto stop function will automatically
stop the record once it is nished playing.

8
Playing the Radio and Setting Radio Presets
1. Change to FM or AM source
2. Use TUNING knob or and on the unit or and on the remote to change to the desired
station
3. To set as a radio preset press and hold PRESETS on the unit or on the remote to enter preset setting
4. Use tuning knob or and on the unit or and on the remote to select desired preset
number
5. Press PRESETS to set the preset
6. Use PRESETS on the unit or PRESETS and and on the remote to select presets
Note: The RR75 supports up to 9 presets for AM stations and 9 presets for FM stations.
FM AM
Playing a CD
1. Change to CD source
2. Press the eject button on the front of
the unit
3. Place a CD in the tray
4. Press the eject button to close the tray
5. Use and on the unit or and
on the remote to change songs
6. Hold and or and to rewind/fast
forward
7. Use and on the remote to change folders
on MP3 CDs
8. Press on the unit or on the remote to pause
and resume playback
9. Press PRESETS on the unit or on the remote to
toggle between Repeat Track, Repeat Folder,
Repeat All, and Shuffle
Playing From a Bluetooth® Device
The RR75 can pair to one Bluetooth® device at a time. The amber Bluetooth® Pairing LED will flash when
in pairing mode and will be solid when paired.
The RR75 also features auto-pairing which means that it will re-pair with the last connected Bluetooth®
device when the Bluetooth® source is selected.
1. Change to Bluetooth® source using Bluetooth button on unit or remote
2. Pair to “Electrohome RR75”on your source device (smartphone or tablet)
3. Use the playback buttons on the unit and remote to control playback or use the source device itself
4. Adjust the volume on your source device as well as on the unit
Note: If your device cannot nd “Electrohome RR75”, you can reset Bluetooth® pairing. Press and hold the Bluetooth® button on
the unit or the remote for 3 seconds to reset pairing.
BT
Playing from an AUX Device
1. Connect a 3.5mm Aux cable to the headphone jack on your source device (smartphone or tablet)
2. Connect the other end of the Aux cable to the AUX IN port on the back of the unit
3. Change to AUX source
4. Control playback on your source device
5. Adjust the volume on your source device as well as on the unit
AUX
CD

9
Playing from USB
1. Change to USB source
2. Insert USB Thumb Drive into USB port on the front of the unit
3. Use and on the unit or and on the remote to change songs
4. Hold and or and to rewind/fast forward
5. Use and on the remote to change folders
6. Press on the unit or on the remote to pause and resume playback
7. Press PRESETS on the unit or on the remote to toggle between Repeat Track, Repeat Folder,
Repeat All, and Shuffle
Recording to USB
The RR75 can record from PHONO, AUX, CD, and Bluetooth®. Files are saved in 128kbps quality. The USB
drive must be formatted in FAT32 or exFAT and be 32GB or less. If the USB is not compatible or not
recognized the display will show “Error”.
Recording from PHONO/AUX/Bluetooth®
1. Change to PHONO/AUX/Bluetooth® source
2. Insert USB drive into USB Port on front of the unit
3. Play music and press the RECORD button on the unit to begin recording. The Recording LED will be
flashing red when recording
4. Press on the unit or on the remote to split the track. This can be used to split songs during
recording without stopping recording
5. Press on the unit or on the remote to pause recording and press again to resume recording
6. Press RECORD to stop recording
Note: Files will be saved in the following location on the USB drive: /RECORD/LINE_IN
Recording from CD
When recording from CD the RR75 will lock playback control until recording is finished. Recording can
be stopped at anytime but cannot be paused or tracks changed during recording.
1. Change to CD source
2. Insert USB drive into USB Port on front of the unit
3. Press RECORD on the unit to begin recording
4. Use and on the unit or and on the remote to select RECORD ONE, RECORD FOLDER,
RECORD ALL
5. Press RECORD to start recording. The Recording LED will be flashing red when recording
6. Press RECORD to stop recording
Note: Files will be saved in one of the following locations on the USB drive: /RECORD/COPY
/RECORD/CDIN
USB
PHONO AUX CD BT

10
Connecting Headphones
1. Connect the headphones to the headphone jack on the front of the system
2. Use the desired source on the RR75
3. Adjust playback volume on the RR75
IMPORTANT: The speakers on the RR75 are disabled when headphones are connected to the headphone jack. To resume
normal playback the headphones must be disconnected.
Connecting to an Amplier
The RR75 can be connected to an external amplifier to integrate it into an existing home audio
system. It is recommended to lower volume on RR75 to 0 when using an external home audio system
as each device’s volume is controlled independently. The RCA Audio Output signal is not affected by
the RR75’s volume or EQ settings.
1. Connect an RCA cable to the RCA Audio Output on the back of the RR75
2. Connect the other end of the RCA cable to an audio input on your amplifier
3. Select the audio input on your amplifier
4. Set the RR75 to the desired source
5. Adjust playback volume on your amplifier
NOTE: Ensure the RCA cable is not connected to a PHONO input on your amplier as this can over-amplify the audio signal
causing damage to the amplier and speakers.