Each time the appliance is turned on, it 
performs an automatic preheat and rinse 
cycle which cannot be interrupted. 
The appliance is ready for use only after 
completion of this cycle. 
 
 DANGER OF BURNS! 
 During rinsing, a little hot water 
flows from the coffee spouts. 
To turn the appliance on, press the ON/
stand-by button (A7) (fig. 7). The mes-
sage “HEATING UP... PLEASE WAIT” is 
displayed.
When heating is complete, the message 
changes to “RINSING”; 
The appliance is at temperature when 
the message “MEDIUM CUP NORMAL 
TASTE” is displayed. 
If no icon is pressed within about 2 min-
utes, the time (if set, see the “Setting the 
clock” section) is displayed. 
If the time has not been set, the appli-
ance displays the last functions set.
When any icon is pressed, “MEDIUM 
CUP NORMAL TASTE” is displayed 
again. The appliance is ready to make 
coffee again. 
6. TURNING ON AND HEATING UP
1. The appliance is preset to make cof-
fee with a normal taste. You can also 
choose coffee with an extra-mild, 
mild, strong or extra-strong taste. 
There is also a pre-ground coffee 
option. To choose the required taste, 
press the icon (B4) (fig. 10) a 
number of times. The required coffee 
taste is displayed. 
2. Place 1 cup under the spouts to 
make 1 coffee or 2 cups for 2 cof-
fees. Lower the spouts as near as 
possible to the cup for a creamier 
coffee (fig. 10). 
3. Press the icon (B5) (fig. 11) to 
select the type of coffee: espresso, 
small cup, medium cup, large cup, 
mug. Now press the icon (B10) if 
you want to make a coffee and the 
 icon (B11) (fig. 13) if you want to 
make 2 coffees. 
 The appliance now grinds the beans 
and starts delivering the coffee into 
the cup. Once the set amount of cof-
fee has been delivered, the machine 
stops delivery automatically and 
expels the exhausted waste coffee 
into the waste coffee container. 
4. After a few seconds, the appliance is 
ready for use again. 
5. To turn the appliance off, press the 
ON/stand-by button (A7) (fig. 7). 
 (Before going off, the appliance per-
forms an automatic rinse cycle. Take 
care to avoid scalds). 
NOTE 1: If the coffee is delivered a drop 
at a time or not at all, see the “Adjusting 
the coffee mill” section.
NOTE 2: If the coffee is delivered too fast 
and the cream is not satisfactory, see the 
“Adjusting the coffee mill” section.
NOTE 3: Tips for a hotter coffee:
• Proceedasdescribedinthesection
“Changing and setting menu param-
eters”, “Rinse” function. 
• Unlesspreheated,donotuseexces-
sively thick cups as they will absorb 
too much heat.
• Preheatthecupsbyrinsingthemwith
hot water. 
NOTE 4: Coffee delivery can be inter-
rupted at any moment by re-pressing the 
previously selected icon which remains lit 
during the operation. 
NOTE 5: As soon as delivery is finished, 
to increase the quantity of coffee in the 
cup, just keep pressing the previously 
selected icon within 3 seconds after 
delivery has finished. 
NOTE 6: When the appliance displays 
“FILL TANK”, fill the tank with water or 
the appliance will not deliver coffee. 
(It is normal for there to be a little water 
left in the tank).
NOTE 7: Never extract the water tank 
while the machine is delivering coffee. 
7. MAKING COFFEE USING COFFEE BEANS