Electrolux E30SO75ESS - 30" Wall Oven User manual

30" HIGH-SPEED OVEN
Oven Cavity
Watts (IEC-705 Test Procedure)
Oven Interior
Interior Light
Porcelain Enamel Turntable Diameter
CONTROL PANEL FEATURES
Electronic Clock & Timer
Glass Wave-Touch®Controls with Blue LED Display
Automatic Settings –
Basic Cook
Recipes
Microwave Options
Speed Bake
Speed Roast
Speed Grill
Convection Cooking Options
POWER RATINGS
Microwave (kW/Amps)
Convection (kW/Amps)
Speed Cooking (kW/Amps)
Voltage Rating
Connected Load (kW Rating) @ 240 Volts
ACCESSORIES
Cookbook
High and Low Racks
Pizza Pan
Easy Reference Guide
SPECIFICATIONS
Oven Cavity Dimensions–
Height
Width
Depth
Overall Exterior Dimensions –
Height
Width
Depth
Power Supply Location
Approved for Under-Counter Installation
Approved for Single Oven Combination Installation*
Shipping Weight (Approx.)
*Approved to be used in combination with any Electrolux ICON®Single Wall Oven
and/or Warmer Drawer.
NOTE: Always consult local and national electric codes. Refer to Product Installation Guide
for detailed installation instructions on the web at electroluxicon.com.
Specifications subject to change.
1.1 Cu.Ft.
1000
Stainless Steel
Yes
13"
Yes
Yes
84
100
17
Yes
Yes
Yes
10
1.7/7.5
3.1/13
3.2/13.5
240V/60Hz/15 or 20A
3.3
Included
Included
Included
Included
9"
16"
13-1/2"
22-7/8"
30"
23-5/8"
Left Bottom Rear
No
Yes
119 Lbs.
electroluxicon.com
High-Speed Oven
E30SO75ESS designer series
High-Speed Oven
High-Speed Oven provides the utmost in
versatility combining high-speed oven
technology with the convenience of both a
microwave oven and conventional oven to
meet your cooking needs.
High-Speed Cooking Options
Versatile options including Speed Bake, Speed
Roast and Speed Grill using high-speed oven
technology for superior results.
Wave-Touch®Controls
Sleek control panel illuminates with just a touch
and fades away after an option is selected.
Versatile Cooking Settings
With 84 basic cook settings, 100
preprogrammed and modifiable recipes and 17
microwave options, this high-speed oven is
almost like having a personal chef.

High-Speed Oven
E30SO75ESS designer series
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•10200 David Taylor Drive •Charlotte, NC 28262 •1-877-4electrolux (1-877-435-3287) •
electroluxicon.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxicon.ca
E30SO75ESS 04/11 © 2011 Electrolux Home Products, Inc. Printed in the U.S.A.
30" High-Speed Oven Specifications
•
Product Weight – 115 Lbs.
•
Voltage Rating –240V/ 60Hz/15 or 20 Amps
•
Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical
supply with ground required on separate circuit fused on both sides
of line.
•
Connected Load (kW Rating) @ 240 Volts = 3.3kW
•
Amps @ 240 Volts =13.2 Amps
•
Oven has a 6-15 plug, requiring a 6-15 receptacle.
•
Always consult local and national electric codes.
•
Allow at least 12" clearance for oven door depth when open.
•
Minimum 22-3/4" deep cutout dimension is critical for proper installation,
to ensure that oven’s faceplate will fit flush against cabinet front.
•
Full oven base of solid plywood or similar material required, capable of
supporting 150 Lbs.
•
Grounded outlet should NOT be located in shaded area, as indicated.
•
Base must be level and cabinet front must be square.
•
High-Speed Oven is NOT approved to be used under counter.
•
High-Speed Oven can be built in alone or is approved to be used in
combination with any Electrolux ICON®Single Wall Oven and/or Warmer
Drawer. (Refer to model-specific Combination Installation Specifications
pages on web.)
•
When used in combination with another Electrolux ICON®built-in product,
a minimum clearance of 2-5/8" required from bottom of
High-Speed Oven cutout to top edge of companion product’s faceplate,
leaving a 2" visible gap between both product faceplates.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
**When used in combination with another
Electrolux ICON® built-in product, a minimum
clearance of 25/8" required from bottom of
High-Speed Oven cutout to top edge of
companion product’s faceplate, leaving a 2"
visible gap between both product faceplates
240V/60Hz
grounded
electrical
outlet should
NOT be located
within shaded
area
C
L
24"min. 30"min.
22 3/8" min.
22 7/8" max.
22 3/4"*
(critical
dimension)
213/8"
min.
217/8"
max.
Full base
required
to support
150 lbs.
36"min.
required
distance
to floor
201/4"
163/4"
*Critical
dimension –
MUST be
applied
2"(visible
gap)**
217/32"
Power supply location
(left bottom rear)
Allow at least
12" clearance
for door depth
when open
30" 211/4"
22 7/8"
23 5/8"
11/16"
5/8"

Use these dimensions and clearance instructions for planning purposes only. For detailed installation
instructions, refer to installation guide, packed with product, or on the web at electroluxicon.com.
Front
Top
General Installation Guidelines
with Counter-Depth French Door Refrigerator
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•10200 David Taylor Drive •Charlotte, NC 28262 •1-877-4electrolux (1-877-435-3287) •
electroluxicon.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxicon.ca
INSTGDLNS_FDR EI 10/10 © 2010 Electrolux Home Products, Inc. Printed in the U.S.A.

Use these dimensions and clearance instructions for planning purposes only. For detailed installation
instructions, refer to installation guide, packed with product, or on the web at electroluxicon.com.
Front
Top
General Installation Guidelines
with Counter-Depth Side-by-Side Refrigerator
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•10200 David Taylor Drive •Charlotte, NC 28262 •1-877-4electrolux (1-877-435-3287) •
electroluxicon.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxicon.ca
INSTGDLNS_SSR EI 10/10 © 2010 Electrolux Home Products, Inc. Printed in the U.S.A.

30" Combination Installation –
High-Speed Oven/Single Wall Oven
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•10200 David Taylor Drive •Charlotte, NC 28262 •1-877-4electrolux (1-877-435-3287) •
electroluxicon.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxicon.ca
SO_EW INST 10/10 © 2010 Electrolux Home Products, Inc. Printed in the U.S.A.
30" Combination Installation Specifications
•
Always consult local and national electric codes.
(Refer to product-specific electrical specifications on this page.)
•
Minimum 24"deep cutout dimension is critical for proper combination
installation, to ensure that each built-in product’s faceplate will fit
flush against cabinet front.
•
Bases must be level and cabinet front must be square.
•
Minimum 4-1/2"required distance from bottom of Wall Oven cutout
to floor, 31"suggested.
•
Respect critical dimensions as noted for proper installation of built-In
products.
•
Minimum 23-1/4" clearance needed for Wall Oven door depth
when open.
30" High-Speed Oven Specifications
•
Product Weight – (E30SO75FPS/E30SO75ESS) 115 Lbs.
•
Voltage Rating – 240V/60 Hz/15 or 20 Amps
•
Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only
electrical supply with ground required on separate circuit fused on
both sides of line.
•
Connected Load (kW Rating) @ 240 Volts = 3.3kW
•
Amps @ 240 Volts =13.2 Amps
•
Full oven base of solid plywood or similar material required, capable of
supporting 150 Lbs.
•
Minimum 2-5/8"clearance required from bottom of High-Speed Oven
cutout to top edge of Wall Oven’s faceplate, leaving a 2"visible gap
between both product faceplates.
30" Electric Single Wall Oven Specifications
•
Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
•
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit fused
on both sides of line.
•
Connected Load (kW Rating) @ 240/208 Volts = 4.0/3.0kW
•
Amps @ 240/208 Volts =16.6/14.4 Amps
•
Full oven base of solid plywood or similar material required, capable of
supporting 200 Lbs.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
* Minimum 25/8"
clearance required
from bottom of
Built-In High-Speed
Oven cutout to top
edge of Wall Oven’s
faceplate, leaving
a 2"visible gap
between both product
faceplates
** Critical dimension –
MUST be applied
24"min. 30"min.
3" max.
281/2"min.
287/8"max.
30" Electric Single
Wall Oven Cutout
For models:
E30EW75GPS
E30EW75GSS
28 1/2"min.
29"max.
4"x 4" opening
to route armored
cable
24"min.**
(critical
dimension)
2" min.
31"
suggested
distance
41/2"
min.
required
Bottom cutout
edge must be
finish cut
Full base required
to support 200 lbs.
Electrical junction
box location
For detailed product dimensions
and installation specifications, refer
to model-specific product page and
installation guide on web
Full plywood base
required to support
150 lbs.
240V/60Hz
grounded electrical
outlet should NOT
be located within
shaded area
2111/16"min.
223/16"max.
2"
(visible
gap)*
C
L
201/4"
163/4"
30" High-Speed
Oven Cutout
For models:
E30SO75FPS
E30SO75ESS
22 3/8" min.
22 7/8" max.

30" Combination Installation –
High-Speed Oven/Single Wall Oven/Warmer Drawer
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•10200 David Taylor Drive •Charlotte, NC 28262 •1-877-4electrolux (1-877-435-3287) •
electroluxicon.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxicon.ca
SO_EW_WD INST 10/10 © 2010 Electrolux Home Products, Inc. Printed in the U.S.A.
30" Combination Installation Specifications
•
Always consult local and national electric codes.
(Refer to product-specific electrical specifications on this page.)
•
Minimum 24"deep cutout dimension is critical for proper combination
installation, to ensure that each built-in product’s faceplate will fit
flush against cabinet front.
•
Bases must be level and cabinet front must be square.
•
Minimum 4-1/2"required distance from bottom of Warmer Drawer
cutout to floor.
•
Respect critical dimensions as noted for proper installation of built-In
products.
•
Minimum 23-1/4" clearance needed for Wall Oven door depth
when open.
30" High-Speed Oven Specifications
•
Product Weight – (E30SO75FPS/E30SO75ESS) 115 Lbs.
•
Voltage Rating – 240V/60 Hz/15 or 20 Amps
•
Single phase 3- or 4-wire cable, 240 Volt, 60 Hertz AC only electrical
supply with ground required on separate circuit fused on both sides
of line.
•
Connected Load (kW Rating) @ 240 Volts = 3.3kW
•
Amps @ 240 Volts =13.2 Amps
•
Full oven base of solid plywood or similar material required, capable of
supporting 150 Lbs.
•
Minimum 2-5/8"clearance required from bottom of High-Speed Oven
cutout to top edge of Wall Oven’s faceplate, leaving a 2"visible gap
between both product faceplates.
30" Electric Single Wall Oven Specifications
•
Product Weights – (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs.
•
Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
•
Connected Load (kW Rating) @ 240/208 Volts = 4.0/3.0kW
•
Amps @ 240/208 Volts =16.6/14.4 Amps
•
To support Wall Oven, two 3"-wide x 3/4"-thick planks must be installed
as a base, capable of supporting 200 Lbs. Do NOT use full base, since
planks are necessary to allow for proper air displacement.
30" Warmer Drawer Specifications
•
Product Weights – (E30WD75GPS/E30WD75GSS) 49 Lbs. /
(E30WD75GTT) 41 Lbs.
•
Voltage Rating –120V/450W/60Hz/15 Amps
•
Connected Load (kW Rating) @120 Volts = 0.45kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
•
Amps @120V = 3.75 Amps
•
Full base of solid plywood or similar material required, capable of
supporting 100 Lbs.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
For detailed product dimensions
and installation specifications, refer
to model-specific product page and
installation guide on web
24"min.
3"max.
††
30"min.
97/8"min.
10 1/4"max.
13/4"min.†
22 3/8" min.
22 7/8" max.
Full plywood base
required to support
150 lbs.
Full plywood base
required to support
100 lbs.
281/2"min.
287/8"max.
281/2"min.
28 3/4"max.
30" High-Speed
Oven Cutout
For Models:
E30SO75FPS
E30SO75ESS Two 3" wide
by 3/4" thick
planks must be
installed, capable
of supporting
200 lbs.
4"x 4" opening to route
armored cable
281/2"min.
28 3/4"max.
240V/60Hz
grounded electrical
outlet should NOT
be located within
shaded area
41/2"min.
required
2111/16"min.
223/16"max.
24"min.**
(critical
dimension)
Electrical junction
box location
Bottom of
oven cutout
115/8"min.**
(critical
dimension)
* Minimum 25/8"
clearance required
from bottom of
Built-In High-Speed
Oven cutout to top
edge of Wall Oven’s
faceplate, leaving
a 2"visible gap
between both product
faceplates
** Critical dimension –
MUST be applied
† Maximum height
depends on critical
dimension (115/8")
†† Electrical junction
box for Wall Oven
must be lower than
the Warmer Drawer
cutout
30" Warmer
Drawer Cutout
For models:
E30WD75GPS
E30WD75GSS
E30WD75GTT
C
L
201/4"
163/4"
2"
(visible
gap)*
30" Electric Single
Wall Oven Cutout
For models:
E30EW75GPS
E30EW75GSS