ELEKTROBOCK WS310 User manual

WIRELESS
TRANSMITTER
WS310WS310
DECLARATION OF CONFORMITY
We, ELEKTROBOCK CZ s.r.o., here
declare that our product WS310 is in
conformity with the basic requirements and
other respective provisions of the directive
1999/5/ES.
Issued: 1.10.2008
TRANSMITTER FOR RECEIVERS WS3XX
MADE IN CZECH REPUBLIC
433.92 MHz
WIRELESS TRANSMISSION
RECEIVER UNDER THE
SWITCH WS301
RECEIVER
WALL
MOUNTED
WS302
RECEIVER
SOCKET
MOUNTED
WS303
POWER 2x1.5 V
button batteries
IP 44
WATERPROOF
FOUR-CHANNEL
KEY CASE
for remote control of up to 4 various appliances
ws310_en:ws111_cz.qxd 4.3.2013 16:50 Page 1

ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: [phone]
www.elbock.cz
MADE IN CZECH REPUBLIC
In case of guarantee
or post-guarantee
service, send the
WS310 to
the distributor or
manufacturer’s address.
TECHNICAL PARAMETERS
Power supply 2x1.5 V, typ GP394 (included)
Hf power < 10 mW
Frequency 433.92 MHz
Protection IP44
Battery lifetime up to 2 years
Working temp. 0°C to 50°C
WS310
WIRELESS TRANSMITTER
CONTROL
BUTTONS
RED LED
(indicates transmittion
of code)
SCREWS
(to remove the rear
cover)
PLACE FOR
BATTERIES
(2x1.5V/ GP394)
ACTIVATION PROCEDURE:
1, Unscrew the two screws on the back of the key case (see Fig.1).
2, Insert the button-type battery 2x1.5 V type GP394 (when using for
the first time remove the protective paper from the battery) see Fig.2.
3, By pressing the button the coded signal is sent and then evaluated
by the receiver. For commissioning the code of the key case must
be uploaded to the reciever (see receiver's instructions).
Code transmission is indicated by a red light (see Fig.3).
Fig.1 Fig.2 Fig.3
Examples of use in connection with the receiver WS3xx: to
control pumps, lights, garage doors, el. drive etc.
List of products is on na www.elbock.cz
ws310_en:ws111_cz.qxd 4.3.2013 16:50 Page 2