ElektroPhysik PoroTest 7 Use and care manual

PoroTest®7
TechnicalReferenceandOperatingManual
AdvancingwithTechnologyElektroPhysik

© B13-A6 08/2014
Subject to change without notice.
ElektroPhysik Dr. Steingroever GmbH & Co. KG
Pasteurstr. 15
D-50735 Cologne, Germany
Tel. [phone]; Fax [phone]
www.elektrophysik.com; [email protected]
ElektroPhysik USA
778 West Algonquin Rd., Arlington Heights IL 60005
Phone [phone]; Fax [phone]
[email protected]
Caution!
Safety Note
Pleaserefertothesafetynotesinsection2beforestarting
operationof PoroTest®7.

ElektroPhysik E-i
Table of contents
Table of Contents
1. General Information...........................E-3
1.1 Applications............................................ E-3
1.2 Description ................................................. E-3
1.3 Supply schedule .................................... E-3
1.4 Accessories............................................. E-4
2. Safety notes.......................................E-4
3. Preparing PoroTest® 7 for
operation ..........................................E-5
4. Preparing the test object....................E-6
5. Selection of the test electrode ...........E-6
6. Instrument settings ..........................E-6
6.1 Test parameters (test voltage) ................. E-7
6.2 Sensitivity.................................................. E-7
6.3 Limit for pores .......................................... E-8
6.4 High voltage trigger ................................. E-8
6.5 Signal LED ................................................ E-8
6.6 Display contrast ......................................... E-9
6.7 Display backlight ....................................... E-9
6.8 Language ................................................... E-9
6.9 Setting mode ............................................ E-9
6.10 Display mode ........................................... E-9
7. General remarks on Operation and
Application .....................................E-10
7. 1 Testing procedure....................................E-11
8. Power supply...................................E-12
9. Charging storage batteries............E-12
10. Changing storage batteries ...........E-12
11.Error Messages ...............................E-13
12. Battery charging messages...........E-14
13. Test principle..................................E-15
14. Technical specification ..................E-16
15.After-sales service...........................E-18
Index......................................................E-20

ElektroPhysik E-1
PoroTest® wiring
1PoroTest® control unit
2Mains cable
3Equipotential cable (Earting cable) (green/yellow)
4Connecting cable (probe-control unit) (black)
5Cable lug for protection earth with earth clamp
6Cable lug for earth magnet or earth clamp
7High voltage probe
8Silicon-rubber electrode
9Metall sweeper electrode
Fig. 1

E-2 ElektroPhysik
PoroTest® sockets
Mains cable socket Sockets for earthing cable and high voltage probe
connecting cable
Fig. 2
Fig. 3