Element ELE1X4SPV350 User manual

VGA Splitter
1x4 VGA Splitter
ELE1X4SPV350
INSTALLATION MANUAL
350
MHz
350
MHz

INTRODUCTION
Dear customer,
Thank you for purchasing this product. For optimum performance and safety, please read these instructions
carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.
This product is a 1x4 VGA splitter with audio. It distributes the input of the VGA signal and stereo audio signal
into the two identical outputs simultaneously. This product has the ability of buffering and amplifying. Each
amplifier splitter’s output can achieve long distance transmission of VGA signal of more than 15 meters. This
VGA splitter offers solutions for monitors or projectors retail and show site and projector factory, noise, space
and security concerns, data center control, information distribution, conference room presentation, school and
corporate training environments.
Features
This VGA splitter has many features that enable it to perform in a superior manner.
 Easy to use
 Install in seconds
 Connects VGA source to 4 VGA displays at a time
 Connects stereo and audio source to 4 audio receivers at a time
 Supports highest video resolution up to 1920x1200 and 1080p
 Supports highest video amplifier bandwidth to 350MHz
Package Contents
 VGA Splitter VGA-102A/VGA-104A
 Power Adapter
 User manual

Specifications
 Input connectors: 1 VGA 15 pin female
 Output connectors: 4 VGA 15 pin female
 Bandwidtch (-3db): 350MHz
 Output independence/Level: RGB: 750 0.7Vp-p HV SYNC TTL Level
 Resolution: 1920x1440, Support DDC, DDC2, DDC2B (at PNP port)
 Horizontal frequency: 30-180 KHz
 Vertical frequency: 43-250 Hz
 Transfer distance: <50 meters
 Power consumption: Use AC-DC Adaptor DC 9-12V Consumption <1.7w
 Dimensions(LxWxH): 4.3” x 2.2” x .98”
 Housing: Metal
 Operating temperature: 5˚C - 40˚C
 Humidity: 0% - 80%
SPECIFICATIONS

Connection and Operation
 Use a quality VGA cable to avoid the signal interference. The RGB grounded wire can not
be short circuited otherwise there will be vision superposition.
 Make sure the cable and plugs are in good shape. Make sure the grounded wires and all
the connections are working properly.
 Make sure there is no disturbing source around.
 Assure the grounded wire is installed properly, the ground resistance is less than 4 Ω
 Do not plug or unplug the cable with electricity.
 End user is not authorized to open the device cover. All warranties void if tampered with.
INSTALLATION
ELE1x4SPV350
computer computer
SINGLE STAGE INSTALLATION DAISY CHAINING
monitors
monitors monitors monitors