DEVA Broadcast DB90-TX Manual

Publish Date: 24-Feb-2017
How can the DB90-TX be set
to act as a Streaming Audio Server,
sending audio to DB90-RX decoder/s
used as an IP Audio Client
SET-UP INSTRUCTIONS

Contents
General information ......................................................................................................................... 4
Point-to-point audio transmission .................................................................................................. 4
Point to multi-point audio transmission ......................................................................................... 5
DB90-TX and DB90-RX Set-up ...................................................................................................... 5
DB90-TX Streaming Audio Server Set-up....................................................................................... 6
DB90-RX IP Audio client Set-up..................................................................................................... 7
Appendix A ......................................................................................................................................... 8
Appendix B ....................................................................................................................................... 12

THIS PAGE
IS INTENTIONALLY
LEFT BLANK

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 4 -
General information
The IP Audio encoder and decoder are controlled trough a build in WEB Server and a standard
web browser is used to monitor their status or to make some adjustments. To operate the devices
you need to know their IP Address. In case you are not aware of the IP Addresses and how to open
the WEB interface, please refer to “Appendix A - DB90-TX Quick User Guide” on page 8 and
“Appendix B - DB90-RX Quick User Guide” on page 12.
This conguration allows two types of applications:
POINT-TO-POINT AUDIO TRANSMISSION

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 5 -
POINT TO MULTI-POINT AUDIO TRANSMISSION
IMPORTANT NOTE: One DB90-TX can send audio to maximum ten DB90-RXs. However,
in order for stable connectivity to be guaranteed, the recommended number of clients is 8.
DB90-TX AND DB90-RX SET-UP
Prior to implementing the below written adjustments, the following requirements should be
fullled:
• DB90-TX must have a static IP address;
• If the device is placed behind a router, you will have to make sure that the Stream Server
Port is properly NAT forwarded;
• DB90-RX may have a dynamic IP address;
• DB90-RX should have access to DB90-TX over the network (Internet or LAN).

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 6 -
DB90-TX STREAMING AUDIO SERVER SET-UP
1. Go to Conguration> IP Audio;
2. Choose the preferred audio signal input;
3. Assign Encoder + Sample rate and the desired Signal Quality. The combination of these
parameters will dene the required minimum bandwidth of your network connection;
4. Then in Stream Settings section – specify the Port to be used and the Maximum supported
connections;
5. Preferably change the Name of the stream to identify you server easily;
6. Press [Save] to save the applied changes.
For detailed information and instructions on how communication with the DB90-TX can be
established, please refer to “Appendix A - DB90-TX Quick User Guide” on page 8.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 7 -
DB90-RX IP AUDIO CLIENT SET-UP
1. Go to Conguration> IP Audio;
2. In IP Audio Client section – URL of the DB90-TX Server should be specied. The URL is a
mandatory requisite needed in order for a connection with the server to be established. The
URL could be compound of DB90-TX’s IP Address and Server Port, ex. 192.168.120:5000;
3. Choose the preferred decoder, prebuffer and specify buffer timeout. The decoder set in
the DB90-RX must match the encoder specied in DB90-TX;
4. If needed, set new gain adjustment settings;
5. From the Source priority Section set the priority of the IP Audio Client;
6. Press [Save] to save the applied changes;
7. Apply the same settings to all IP Audio clients to be used in the conguration.
For detailed information and instructions on how communication with the DB90-RX can be
established, please refer to “Appendix B - DB90-RX Quick User Guide” on page 12.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 8 -
Appendix A
DB90-TX
IP Audio Encoder
Quick User Guide
BEFORE YOU USE THIS PRODUCT
In order to be able to enjoy all the benefits of owning your new
DEVA product, please verify first that the latest software and
firmware release were installed.
Visit www.devabroadcast.com/downloads for the most
recent software and firmware downloads, prior the installation.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 9 -
This Quick user guide will make the installation of DB quick and easy these , yo
ca simplify the process and save yourself extra time and effort
90-TX . Following steps u
n . For more information about the Safety
precautions and the Operating environment recommendations please refer to the User Manual.
1. The encoder has to be connected to the local network or Internet by cable with RJ-45 connector;
2. As only one input at a time can be managed by the encoder, please select the preferred signal
source input - either analog or digital one:
For use a cable that ends with two standard RCA jacks to connect the analog signal
source to the analog audio inputs of DB90-TX;
For use a cable that ends with standard RCA jack to connect the S/PDIF signal
source to the digital audio input of DB90-TX;
3. Connect the device to the power supply.


Analog audio
Digital audio
Open a WEB Browser and enter the device IP Address in the browser's address field, them press
Enter. : ;
;
The web interface will be displayed to you with the respective main pages Status Configuration;
Factory Defaults Reboot; Firmware Update.
Current status information will be displayed comprising Audio Status; Network Status;
onnection Status
For further reference see the detailed explanation on the right part of the screen.
: Active
c s .
Click on the button.
Fill in the username and
password requested, default values being: se
and ass .
Configuration Dialog box similar
to the following will appear.
u rname:
p word:user pass
NOTE: Clicking on the icon will toggle live data andLIVE DATA ON OFF
DB90-TX is controlled trough a build in WEB Server and a standard web browser can be used to
monitor its status or to make some adjustments.
To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it
through the headphones when you turn on the the device. Alternatively, use the Network discovery feature
at Local networks ( ).for reference see tepS 9
WEB Interface
STEP 3
Configuration
STEP 2
Connection
STEP 1

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 10 -
General Network ettingsS
If you plan to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.
SNMP Settings
Press the to download the latest available DB90 TX
SNMP MIB file. Then Agent ID, Agent Port, Community, Manager IP
and Manager Port.
is used to identify the device among others when a SNMP
notification is send. Agent - enables/disables SNMPAgent.
Download button
specify
Agent ID
-
Web erver ettingsS S
In order to enhance the security of DB90-TX you can set new username
and password. In case a dialog box appear, fill in the NEW username and
password requested.
u p d fieldsNOTE: If sername and asswor are left blank, security is used.NO
NOTE: The MIB file may vary from one firmware revision to another.
Downloading this file from the device guarantees that you have the
proper MIB file.
Audio Settings
Choose the preferred audio signal source. Assign Encoder +Sample rate
and th signal quality. The combination of these parameters will
define the of your Internet connection.
PCM will quality but Network andwidth will be
required
e desired
required bandwidth
improve the , higher b
consequently.
NOTE:
RTPAudio Player
The RTP Settings require Server Address and Port to be
entered.
Decoders'
Icecast Audio Player
If DB90-TX is used as Icecast Source Mount point
Address and Port should be .
an , Encoder IP
filled in
The username and password are used to secure the connection. Make
sure to enter the same information on both sides of the connection.
Stream Settings
Preferably c DB90-TX
d the s
hange the name of the .
If you decide to use the Stream Server you should make adjustments to
the Port an maximum connection which will be supported.
Later on it will be used as a
title name on all WEB pages. Customizing the name will make the device
more recognizable.
NOTE: For more information refer to the help section on the right part of the
screen, containing brief information about each of the fields. For field
description display, point the mouse cursor on the fields on the right.
NOTE: The selected encoder must match the settings of the decoders on
the other side of the connection.
Network Configuration
STEP 4
IP Audio Configuration
STEP 5

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 11 -
1. on
l
2.
3. .
4.
displayed A
w.
displayed t, m Step 7
Open Advanced sharing settings by clicking the , and then . In the
search box, type , click , and then, in the left pane click
.
Select your current network profile.
Click , and then click Save changes If you're prompted for an
administrator password or confirmation, type the password or provide confirmation.
To access the device open a new Explorer bar and click on . If you have successfully enabled
the network discovery option, the device will be . double click on will open a new
WEB browser windo
If you have already enabled this function on your computer just open a new Explorer bar and click
on . The device must be . If no follow the instructions fro .
Start butto Control Panel
network Network and Sharing Center
Change advanced sharing settings
Turn on network discovery
NOTE
n " "
" " " "
" "
Network
DB90-TX
:
Network
Enjoy the work with DB90TX - a product of superb quality and functionality.
For detailed explanations concerning the device refer to its complete manual.
To update the device firmware please
select the new firmware file. Press the
Upload button. A dialog window will appear
ait for the
process to complete.
,
.
firmware update and w
The latest Firmware file can be
downloaded from www.devabroadcast.com
Confirm
NOTE:
Firmware pdateU
This process will fully restore DB90- X to its Factory Defaults, including the Network settings. To start
a Hardware Reset, disconnect the power supply cable from the unit. Then locate the RESET button on
Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the RESET
button h ld until the PWR led starts blinking. Release the RESET button and ait for DB90- X to reboot
with the factory default settings.
T
e w T
Hardware eseR t
To restore DB90- X to its Factory Defaults
you should first press the Restore button. A
new window will appear: confirm that you
want to restore factory defaults and wait for
the process to complete. All settings will be
restored to their factory defaults except for
Network and WEB server Settings which remain unchanged On completion of the process the settings
should have the proper default values.
T
.
The Factory Defaults page
To start Rebooting of DB90- X press the
Reboot button. A dialog warning window will
appear. Confirm that you want to reboot the
device and wait for the process to complete.
T
Rebooting
Factory Defaults, Reboot, Firmware Update
STEP 6
Network discovery for Windows 7
STEP 7

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 12 -
Appendix B
DB90-RX
IP Audio Decoder
Quick User Guide
BEFORE YOU USE THIS PRODUCT
In order to be able to enjoy all the benefits of owning your new
DEVA product, please verify first that the latest software and
firmware release were installed.
Visit www.devabroadcast.com/downloads for the most
recent software and firmware downloads, prior the installation.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 13 -
This Quick user guide will make the installation of DB quick and easy these , yo
ca simplify the process and save yourself extra time and effort
Preferably, connect the device to a DHCP Server net from which DB90 RX will receive an IP
address.
90-RX . Applying steps u
n .
work -
For more information about the Safety
precautions and the Operating environment recommendations please refer to the User Manual.
NOTE:
To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it
through the headphones when you turn on the the device. Alternatively, use the Network discovery feature
at Local networks ( ).for reference see tepS 9
1. ;
2. Connect the DB90-RX to the power supply.
Connect the device to a local network or to the Internet by a cable with an RJ-45 connector
Open a WEB Browser and enter the device IP address in the browser's address field press
Enter.
, then
The web interface will be displayed to you with the respective main pages Status Configuration;
Factory Defaults Reboot; Firmware Update.
: ;
;
Current status information will be displayed comprising Audio Status; Network Status; Connection
Status
For further reference see the detailed explanation on the right part of the screen.
.
Click on the button.
Fill in the username and
password requested, default values being: ser
and ass .
Configuration Dialog box similar
to the following will appear.
u name:
p word:user pass
NOTE: Clicking on the icon will toggle live data andLIVE DATA ON OFF
Connection
STEP 1
WEB Interface
STEP 2
Status Section
STEP 3
General Settings
STEP 4

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 14 -
General Network ettingsS
If you prefer to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.
IP PlayerAudio
DB90-RX has one main URL and two alternative Stream Audio Sources
. Switching between streams is immediate . When
current Stream is URL2 or URL3 and connection to URL1 is restored there
will be an instantaneous switch back to URL1.
If the server does NOT use Port 80 you should enter URL and Port
. For example
on audio loss
of the
Encoder 192.165.1.21 .
URL2, URL3
:2100
SNMP Settings
proper -Press the to download the DB90 RX SNMP
MIB file. Then Agent ID, Agent Port, Community, Manager IP and
Manager Port.
is used to identify the device among others when a SNMP
notification is send. Agent - enables/disables SNMPAgent.
Download button
specify
Agent ID
Web erver ettingsS S
In order to enhance the security of DB90-RX you can set new username
and password. A dialog box requesting your NEW username and password
may appear.
u p d fieldsNOTE: If sername and asswor are left blank, security is used.NO
NOTE: The selected players' decoders must match the settings of the
encoder devices on the other side of the connection.
Source Priority
DB90-RX has one main and two backup audio sources. If the audio signal
of the main source disappear the device will switch to the first available
backup source.
When the main audio signal is recovered DB90-RX will automatically
switch back to it. Depending on your needs the priority of the connections
should be specified.
Other Settings
By choice, you can change the name of the device. Later on it will be used
as a title name on all WEB pages. Customizing the name will make the
device more recognizable.
RTP Audio Player
Choose a port and decoder.
Icecast Audio Player
Choose a port and decoder. The username and password are used to
secure the connection. Make sure to enter the same on both sides.
Audio Loss and Audio Recover
Select the appropriate levels of loss and recovery of the audio signal.
Do not forget to set the timeout.
Set wether the loss of audio should be registered by the one channel only
or for both of them.
Analog Audio Output
Adjust the analog output level of the device.
Network Configuration
STEP 5
P Audio ConfigurationI
STEP 6
Backup Audio Configuration
STEP 7

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: [phone], Fax: [phone]
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 15 -
1. on
l
2.
3. .
4.
displayed
w.
displayed m Step 9
Open Advanced sharing settings by clicking the , and then . In the
search box, type , click , and then, in the left pane click
.
Select your current network profile.
Click , and then click Save changes If you're prompted for an
administrator password or confirmation, type the password or provide confirmation.
To access the device open a new Explorer bar and click on . If you have successfully enabled
the network discovery option, the device will be . Double click on will open a new
WEB browser windo
If you have already enabled this function on your computer just open a new Explorer bar and click
on . The device must be . If not follow the instructions fro .
Start butto Control Panel
network Network and Sharing Center
Change advanced sharing settings
Turn on network discovery
NOTE:
n " "
" " " "
" "
Network
DB90-RX
Network
Enjoy the work with DB90RX - a product of superb quality and functionality.
For detailed explanations concerning the device refer to its complete manual.
To update the device firmware, please
select the new firmware file. Press the
Upload button. A dialog window will appear
ait for the
process to complete.
.
firmware update and w
The latest Firmware file can be
downloaded from www.devabroadcast.com
Confirm
NOTE:
Firmware pdateU
This process will fully restore DB90-RX to its Factory Defaults, including the Network settings. To start
a Hardware Reset, disconnect the power supply cable from the unit. Then locate the RESET button on
Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the RESET
button hold until the POWER led starts blinking. Release the RESET button and ait for DB90-RX to
reboot with the factory default settings.
w
Hardware eseR t
To restore DB90-RX to its Factory Defaults
you should first press the Restore button. A
new window will appear: confirm that you
want to restore factory defaults and wait for
the process to complete. All settings will be
restored to their factory defaults except for
Network and WEB server Settings which remain unchanged On completion of the process the settings
should have the proper default values.
.
The Factory Defaults page
To start Rebooting of DB90-RX press the
Reboot button. A dialog warning window will
appear. Confirm that you want to reboot the
device and wait for the process to complete.
Rebooting
Factory Defaults, Reboot, Firmware Update
STEP 8
Network discovery for Windows 7
STEP 9