ELEVATE CARGO-CART User manual
Page 1Rev. 071520 1-888-651-3431
Hitch-Mounted Cargo/Game Cart
Instructions for Part #CARGO-CART
General Guidelines
• It is the user’s responsibility to read and follow all instructions. Failure to follow the warnings and
instructions may result in serious injury or death.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and prac-
tice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
• Weight capacity when used as a cargo carrier is 500 lbs. Weight capacity when used as a game
cart is 300 lbs.
• This carrier is designed for 2” hitch receivers.
Work Area
• Keep work area clean, free of clutter and well lit.
• Keep children and bystanders away while operating the Cargo Cart. Distractions can cause you to
lose control, so visitors should remain at a safe distance from the work area.
• Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your
work area, particularly those hazards below the work surface hidden from the operator’s view that
may be unintentionally contacted and may cause personal harm or property damage.
• Be alert of your surroundings. Using the Cargo Cart in conned work areas may put you danger-
ously close to cutting tools and rotating parts.
Personal Safety
• Stay alert, watch what you are doing, and use common sense when using the Cargo Cart. Do not
use the Cargo Cart while you are tired or under the inuence of drugs, alcohol, or medication. A
moment of inattention while operating an Cargo Cart may result in serious personal injury.
• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing,
and gloves away from moving parts.
• Use safety apparel and equipment. Use safety goggles or safety glasses with side shields which
comply with current national standards, or when needed, a face shield. Use as dust mask in dusty
work conditions. This applies to all persons in the work area. Also use non-skid safety shoes, hard-
hat, gloves, dust collection systems, and hearing protection when appropriate.
Page 2Rev. 071520 1-888-651-3431
Use and Care
• Do not modify the Cargo Cart in any way. Unauthorized modication may impair the function and/or safe-
ty and could affect the life of the equipment. There are specic applications for which the Cargo Cart was
designed.
• Always check of damaged or worn out parts before using the Cargo Cart. Broken parts will affect the Cargo
Cart operation. Replace or repair damaged or worn parts immediately.
• Do not exceed the Cargo Cart load capacity.
• Distribute the load evenly. Uneven loads may cause the Cargo Cart to tip, resulting in personal injury to the
operator or others. To minimize the effects of dynamic loading, make sure the load is centered on the carrier.
• Use the Cargo Cart on at and level surfaces capable of supporting the Cargo Cart and its maximum load.
Pulling or pushing a load on a slanted or uneven surface can result in loss of control.
• Prior to transporting a load, make sure the ramp of the carrier is folded and secured. The load itself must
also be properly secured to the carrier.
• When the Cargo Cart is not in use, store it in a secure place out of the reach of children. Inspect it for good
working condition prior to storage and before re-use.
• WARNING: Flammable cargo can ignite from exposure to heat. Be aware of the possible re risk and prop-
erty damage resulting from the vehicle’s exhaust system pointing at or running near the cargo in the Cargo
Cart. Do not use if this condition exists.
Product Warranty and Liability
GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Deal-
er”) will be free of defects in material and workmanship at the time of receipt, and will meet the specications stated at the place of pur-
chase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.
This product warranty is effective for the period of time stated below, unless otherwise stated in the product instructions or depicted in
the product advertisement. All Authorized Dealer warranties are NON-TRANSFERABLE and cover only the original end purchas-
er. This limited warranty does not cover products purchased through non-authorized dealers. Non-authorized dealer receipts are not
accepted for warranty verication.
***Warranty claims must be made directly to the original place of purchase.***
WARRANTY PERIOD: This warranty remains in force for one year from the date of the product’s accepted delivery. The Authorized
Dealer offers a one year manufacturer’s warranty for most products unless otherwise specied on the product advertisement.
WARRANTY SERVICE: The Authorized Dealer will replace any defective or malfunctioning part at no charge, including payment of the
shipping costs of parts or replacement product to and from the manufacturer. The purchaser is responsible for labor charges. If the
product does not meet specications as depicted in the advertisement, the Authorized Dealer will refund the full purchase price of the
product.
Questions regarding the warranty on a specic product and warranty claims should be directed to the Authorized Dealer with whom the
purchase transaction was made.
WARRANTY LIMITATIONS: The above warranty does not apply to products that are repaired, modied or altered by any party other
than the Authorized Dealer; are subjected to unusual physical stress or conditions (such as overloaded ramps or corrosion), natural
disaster, governmental actions, wars, strikes, labor disputes, riots, theft, vandalism, terrorism or any reason beyond reasonable control;
are damaged due to improper installation, misuse, abuse, accident or negligence in use, storage, transportation or handling, or tamper-
ing; or to products that are considered consumable items or items requiring repair or replacement due to normal wear and tear.
Product should be inspected prior to signing for delivery. Product damage incurred during shipping, unless noted on the Bill of Lading at
the time of delivery, renders this warranty void.
LIMITED LIABILITY: In no event shall THE AUTHORIZED DEALER be liable to the purchaser or any third party for any indirect, inci-
dental, consequential, special, exemplary or punitive damages arising out of the use of the product, including, without limitation, prop-
erty damage, loss of value of the product or any third party products that are used in or with the product, or loss of use of the product or
any third party products that are used in or with the product.
Page 3Rev. 071520 1-888-651-3431
Tools Needed:
Adjustable Wrench 13mm Wrench
Diagram and Parts List
Page 4Rev. 071520 1-888-651-3431
Assembly
1. Install the left carrier frame (1) along the arrow direction. Fit the rotary shaft and axle sleeve togeth-
er with the right carrier frame (2). See FIG 1.
2. Insert the U-tube handle (3) into the left carrier frame along the arrow direction. See FIG 2.
Page 5Rev. 071520 1-888-651-3431
3. Insert the connecting swivel tube (4) into the U-tube handle (3), align the hole position, and x the
U-tube handle with the connecting swivel tube using M8*35 outer hexagon bolts (5) (4Pcs) and M8
lock nut (6) (4Pcs). Fix the other end of the connecting swivel tube in the same way with right carrier
frame (2). See FIG 3.
4. After the left and right carrier frames are laid at, the hole position on the U-tube handle is aligned
with the hole position on the left carrier frame, which is secured with square pin (7) (2Pcs) . See FIG 4
Page 6Rev. 071520 1-888-651-3431
5. Install the assembled carrier frame of Step 4 on the bottom welding assembly (8). Align the hole on
the center.
Insert the bent pin (9) (2Pcs) down into the axle sleeve, through M6 washer (10) (2Pcs) in sequence.
Compress the bottom of the carrier frame as shown, screw the hand wheel (11) (2Pcs). See FIG 5.
Note: Rotate the bending pin to 90 degrees and switch between locking and loosening states.
Page 7Rev. 071520 1-888-651-3431
6. Pass through the long bend pin (12) to solid roller (14) (2Pcs) and protective sleeve (13) (2Pcs) as
shown and insert it into any hole of the bottom carrier frame. Insert and x M3.8 split pin (15) on the
other end after passing through the square pipe. See FIG 6.
Page 8Rev. 071520 1-888-651-3431
7. The following steps are from carrier to the trolley. Loosen the bent pin, clamp the hand wheel,
rotate bending pin to 90 degrees as loosen state, pull the square of the xed the square pin (2 Pcs),
turn up the right carrier frame, the U-tube handle stretched out automatically from the left carrier
frame, and adjust the U-tube handle after spinning in place, insert and x the square pin (2 Pcs), pull
out the long bent pin, then move out the carrier frame until see the square tube in the middle of the
frame. Connect two solid rollers (2 Pcs) with long bar bent pins, x with M3.8 Split pin on the other
end, and move the frame again until the wheel hits the ground. See FIG 7.
8. Below are the carrier and trolley setups. See FIG 8.
Table of contents
