Sealey MK75 User manual

PARTS CART WITH PANEL TRAIN
MODEL NO: MK75
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9Only use on firm, level, unobstructed surfaces which are capable of supporting the cart and wheels.
8DO NOT overload.
9Always load evenly with the centre of gravity of the load as near the centre as possible.
9Apply the brakes before commencing work.
8DO NOT stand/ride on the cart, or allow others to do so.
9Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
WARNING! Failure to comply with these instructions may result in loss of load, damage to the cart or other property and/or personal
injury.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Suitable for use with windscreens, sheet metal, hoods and doors as well as other large items. Panel train includes 8 foam cushioned
support arms to protect the items held within it. Fitted with 4 castors, two with brakes, for maximum manoeuvrability and safe
positioning. Also Includes: 3 Shelves, 2 600mm arms, 6 “S” shaped hooks.
3. SPECIFICATION
Model No...........................................................MK75
Overall Dimensions .................1400 x 800 x 1870mm
Shelf Dimensions.........................940 x 550 x 510mm
Max Capacity.....................................................100kg
4. ASSEMBLY
Assemble panel stand according to the parts diagram attached.
MK75 Issue 1 11/12/19
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Wear
protective
gloves
Wear
protective
footwear

MK75 Issue 1 27/11/19
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
Page 1 of 1
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
There may be alternative versions of this product, please contact us should you require this information.
IMPORTANT: No liability is accepted for incorrect use of product. Spare parts must be fitted by a competent person
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Parts Information:
Parts Cart with Panel Train
Model No: MK75
Item Part No. Description
1 MK. Top Connect Bar
2 MK. Middle Connect Bar
3 MK. Bottom Connect Bar
4 MK. Upper Vertical Bar
5 MK. Lower Vertical Bar (L)
6 MK. Lower Vertical Bar (R)
7 MK. Support Arm
8 MK. Base Frame
9 MK. Support Arm with Holes (L)
10 MK. Support Arm with Holes (R
11 MK. Mesh Shelf
12 SS.S Hex Head Set Screw M8 X 50 Zinc
Item Part No. Description
13 FWM.S Flat Washer M8 Zinc
14 NLN.S Nyloc Nut M8 Zinc
15 SS.S Hex Head Set Screw M8 X 40 Zinc
16 MK. Castor Wheel Set
17 MK. Hook (L-Shape)
18 MK. Vertical Support Arm with Foam
19 MK. Support Buckle with Knob
20 MK. Back Base Frame
21 MK. Connector (L-Shape)
22 SS.S Hex Head Set Screw M10 X 50 Zinc
23 NLN.S Nyloc Nut M10 Zinc
24 MK. Side Pin (M8 x 50)
MK75 Issue 1 11/12/19