Elicent REC duo 100 User manual

QUICK - GUIDE
REMOTE CONTROL
0 - ON/OFF - Device on/off.
1 - PUSH-PULL MODE¹ - 24 h operation at the set
speed. Automatic: operation with alternating flow.
2 - SPEED 1¹ - Low speed setting.
3 - SPEED 2¹ - High speed setting.
4 - TIMER-SET BOOST² - Timer-set operation in
ejection only at maximum speed.
5 - SLEEP MODE¹ - Maintains the selected operating
mode at the set speed 1. To exit this mode before
the end of the 8 hours, press any key (except 0).
6 - FORCED FLOW CONTROL¹ - The devices operate
either in ejection only or in injection only. Press
once: ejection mode. Press twice: injection mode.
7 - FREE COOLING (no inversion)¹ - No inversion of
flow. Press once: flow inversion stops in the
direction of rotation active at that moment. Press
twice: all the devices invert flow and maintain this
set direction of rotation.
Thank you for choosing REC-duo. This Quick-Guide helps you to
understand and use your new ventilation system to get the most out
of its performance.
For installation and initial set-up please refer to the main manual.
NOTES
1: FUNCTION THAT CONTROLS ALL PRODUCTS PAIRED WITH THE REMOTE
CONTROL.
2: FUNCTION THAT CONTROLS THE SINGLE PRODUCT PAIRED WITH ITS OWN
REMOTE CONTROL
(not valid if only one remote control is used on several devices - see paragraph
"PAIRING A REMOTE CONTROL WITH SEVERAL VENTILATION UNITS").
LED INDICATION: Every time a button is pressed an LED light on the remote will
indicate that the command has been received.

LIGHT LEGEND
CLEANING
QUICK - GUIDE