Elkay Celebrity CR3321 User manual

These sinks comply with ANSI Standard A112.19.3M.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Model CR3321 is listed with the Canadian Standards
Association.
I
A
P
M
O
UPC
F
O
U
N
D
E
D
1
9
2
6
Model CR3321 Illustrated
4" 4" 4" 4"
3" R
C C
A
DB
E
1-1/4"
1-3/4" R
Celebrity®Double Bowl Sink
Models CR3321 and CR4322
®
SPECIFICATIONS
GENERAL
Good quality double bowl Celebrity sink is seamlessly drawn
of #20 gauge, type 304 (18-8) nickel bearing stainless steel.
Self-rimming.
DESIGN FEATURES
Bowl Depth: 7".
Coved Corners: 3" radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces machine polished to a lustrous, high-
lighted Celebrity bright finish.
Underside: Fully undercoated.
OTHER
Drain Opening: 3-1/2".
Faucet Holes: 1, 2, 3, 4 or 5 holes as indicated. 4" center to
center.
Note: Unless otherwise specified, sink is furnished with four
faucet holes as shown.
Recommended Sink Base:
For CR3322 – 36". For CR4322 – 48".
OPTIONAL ACCESSORIES
Rinsing Baskets: LKRB1611 (CR3321), LKRB1614 (CR4322),
LKERBSS (CR3321 and CR4322).
Cutting Board: CB1516 (CR3321).
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2001 Elkay Mfg. Co.
(Rev. 7/01) 1-14D
www.elkay.com
Model CR3321
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Cutout in No. of
Countertop 11/2" Dia.
Overall Inside Each Bowl (11/2" Radius Faucet Ship.
Model L W L W D Corners) Holes Wt.
Number A B C D E L W 4" Centers Lbs.
CR3321 33 211/414 153/47 323/8205/81, 2, 3, 4 or 5 151/4
CR4322 43 22 19 153/47 423/8213/81, 2, 3, 4 or 5 20
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.