Elkay Pacemaker PSMR3322 Series User manual

Cutout in
Countertop No. of
Inside Inside (11/2" Radius 11/2" Dia. Minimum Ship.
Model Overall Left Bowl Right Bowl Corners) Faucet Cabinet Wt.
Number L W L W D L W D L W Holes Size Lbs.
PSMR3322 33 22 71/2153/451/821 153/471/4323/8213/81, 2, MR2, 3, 4, 5 or 6 36 151/2
PSMR3322R 33 22 21 153/471/471/2153/451/8323/8213/81, 2, MR2, 3, 4, 5 or 6 36 151/2
GENERAL
Fine quality sink bowls seamlessly formed of #20 gauge, type
304 (18-8) nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depths: 5-1/8" (small bowl), 7-1/4" (large bowl).
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are polished to a lustrous highlighted
satin finish.
Underside: Fully protected by heavy duty Sound Guard®
undercoating to dampen sound and prevent condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
Suffix “R”denotes small bowl is on right.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKRB1520, LKRB715 or LKERBSS.
Cutting Boards: CB816, CB1516, CB1713 or CBS715.
Model PSMR33224
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
These sinks comply with ANSI Standard A112.19.3M.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
I
A
P
M
O
UPC
F
O
U
N
D
E
D
1
9
2
6
Elkay2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2005 Elkay
(Rev. 1/05) 1-71E
www.elkayusa.com
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Pacemaker®Double Bowl Sink
Model PSMR3322 Series
®
SPECIFICATIONS
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Model PSMR3322R4

2-1/4" R
3" R3" R
1-1/4"
15-3/4"
1-3/4" R
7-1/2"
4" 4" 4"
7-1/4"
21"
33"
22"
5-1/8"
Model PSMR33224 Illustrated
2-1/4" R
3" R 3" R
1-1/4"
15-3/4"
1-3/4" R
7-1/2"
4"4"
4"
7-1/4"
21" 33"
22"
5-1/8"
Model PSMR3322R4 Illustrated
Pacemaker®Double Bowl Sink
Model PSMR3322 Series
®
SPECIFICATIONS
Elkay2222 Camden Court
Oak Brook, IL 60523
www.elkayusa.com
Printed in U.S.A.
©2005 Elkay
1-71E (Rev. 1/05)
4"
4"
4" 4"
4" 4" 4"
4" 4" 4" 4"
4" 4" 4" 4" 4"
4"
4"
4" 4"
4" 4"4"
4"4" 4" 4"
4" 4" 4" 4" 4"
(TWO FAUCET HOLE CONFIGURATION)
Model PSMR33222
(ONE FAUCET HOLE CONFIGURATION)
Model PSMR33221
(MR TWO FAUCET HOLE CONFIGURATION)
Model PSMR3322MR2
(THREE FAUCET HOLE CONFIGURATION)
Model PSMR33223
(FOUR FAUCET HOLE CONFIGURATION)
Model PSMR33224
(FIVE FAUCET HOLE CONFIGURATION)
Model PSMR33225
(SIX FAUCET HOLE CONFIGURATION)
Model PSMR33226
(TWO FAUCET HOLE CONFIGURATION)
Model PSMR3322R2
(ONE FAUCET HOLE CONFIGURATION)
Model PSMR3322R1
(MR TWO FAUCET HOLE CONFIGURATION)
Model PSMR3322RMR2
(THREE FAUCET HOLE CONFIGURATION)
Model PSMR3322R3
(FOUR FAUCET HOLE CONFIGURATION)
Model PSMR3322R4
(FIVE FAUCET HOLE CONFIGURATION)
Model PSMR3322R5
(SIX FAUCET HOLE CONFIGURATION)
Model PSMR3322R6
HOLE DRILLING CONFIGURATIONS