Elkay Pacemaker PSR250 Sink User manual

Cutout in No. of
Countertop 11/2" Dia.
Inside Inside (11/2" Radius Faucet Ship.
Model Overall Left Bowl Right Bowl Corners) Holes Wt.
Number L W L W D L W D L W 4" Center Lbs.
PSR250 33 22 14 18 71/4131/216 71/4323/8213/81, 2, S2, 3 or 4 18
Pacemaker®Double Bowl Sink
20 Gauge – Type 304 – Self Rim
Model PSR250 Sink
®
SPECIFICATIONS
GENERAL
Pacemaker double bowl sink has extra-large bowl to accom-
modate pots and pans, plus smaller, yet still, roomy, bowl on
right side designed to receive a waste disposer. Fine quality sink
seamlessly drawn of #20 gauge, type 304 (18-8) nickel bearing
stainless steel. Self-rimming.
DESIGN FEATURES
PSR Bowl Depth: 7-1/4".
Coved Corners: 1-3/4" radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted bright satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Four faucet holes furnished unless otherwise specified.
Recommended Sink Base: 36".
OPTIONAL ACCESSORIES
Rinsing Baskets: LKRB1614, LKRB1611, LKERBSS and VB1816.
Bottom Grid: LKBG1613.
Cutting Boards: CBR1418, CBR1316, CBS1418, CBS1316,
CB1613, CB1713, CBT1613 and CBT1713.
Elkay 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2003 Elkay
(Rev. 2/03) 1-130B
www.elkay.com
Model PSR2504
Model PSR2504 Illustrated
5"
5"
14" 13-1/2"
2-1/8"
33"
4"
2"
1-3/4" R
1-3/4" R
4" 4"
4"
2"
7-1/4"
16" 22"
18"
2"
2"
2-1/8" 2-1/8"
2-1/4"
3-1/8"
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
SINK DIMENSIONS (INCHES)*
*Length is left to right.Width is front to back.
PSR2501 PSR250S2
PSR2502 PSR2504
PSR2503
HOLE DRILLING CONFIGURATIONS