Elkay Sink DRKADQ2220R User manual

Elkay 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2003 Elkay
(Rev. 8/03) 1-166A
www.elkayusa.com
Model DRKRQ2220R4
GENERAL
Lustertone sinks with rear faucet ledge and right or left bubbler
ledge. Highest quality sink bowl seamlessly drawn of #18 gauge,
type 304 (18-8) nickel bearing stainless steel. Self-rimming with
double ledge.
DESIGN FEATURES
DRKRQ Bowl Depth: 7-5/8".
DRKADQ Bowl Depths: 5-1/2", 6" or 6-1/2".
Coved Corners: 1-3/4" vertical and horizontal radius.
Bowl and Faucet Deck Recess: 5/32" below outside edge of
sink.
Finish: Exposed surfaces are hand blended to a lustrous
highlighted satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
DRKRQ Series and DRKADQ2220 drain openings are 3-1/2"
and centered in bowl as illustrated.
DRKADQ2522 drain opening is 3-1/2" and located centered
left-to-right and off-centered front-to-back as illustrated.
Suffix “L” (left) and “R” (right) denotes location of side ledge.
NOTE: Unless otherwise specified, sink is furnished with faucet
holes as shown.
Lustertone®with Quick-Clip®
Double Ledge Model DRKRQ Series
Model DRKADQ – A.D.A. Compliant Series Sinks
®
SPECIFICATIONS
Cutout in
Inside Countertop 31/2"
Overall Each Bowl (11/2" Radius Drain Opening Minimum Ship.
Model L W L W D Corners) (see above Cabinet Wt.
Number A B C D E L W for details) Size Lbs.
DRKRQ Series
DRKRQ2220L 22 191⁄216 131⁄275⁄8213⁄8187⁄8Centered 27 14
DRKRQ2220R 22 191⁄216 131⁄275⁄8213⁄8187⁄8Centered 27 14
DRKRQ2522L 25 22 19 16 75⁄8243⁄8213⁄8Centered 30 16
DRKRQ2522R 25 22 19 16 75⁄8243⁄8213⁄8Centered 30 16
DRKADQ Series
DRKADQ2220L 22 191⁄216 131⁄2** 213⁄8187⁄8Centered 27 14
DRKADQ2220R 22 191⁄216 131⁄2** 213⁄8187⁄8Centered 27 14
DRKADQ2522L 25 22 19 16 ** 243⁄8213⁄8Off-Centered 30 16
DRKADQ2522R 25 22 19 16 ** 243⁄8213⁄8Off-Centered 30 16
DRKRQ2220L4 Illustrated
B
D
3"
SLOTTED
HOLE
(1 PLACE)
1-3/4" R
A
C
1-3/4" R E
DRKADQ2522R4 Illustrated
SLOTTED
HOLE
(1 PLACE)
3"
B
D
1-3/4" R
A
C
E
5"
1-3/4" R
SINK DIMENSIONS (INCHES)*
*Length is left to right.Width is front to back.
**Available in 5-1/2", 6" and 6-1/2" depths. Please consult your sales representative for other
depths or modifications.
Slotted Faucet and Bubbler Hole
Quick-Clip®
Mounting System
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.