Elmo Image Mate 4 User manual

INSTRUCTION MANUAL
Image Mate 4
Please read this instruction manual carefully before using this product.

2
TABLE OF CONTENTS
TABLE OF CONTENTS ..................................................................................................... 2
INTRODUCTION................................................................................................................ 3
GREETING ....................................................................................................................... 3
NOTE ................................................................................................................................ 3
INSTALLING / UNINSTALLING........................................................................................ 3
Image Mate 4..................................................................................................................... 5
STARTING IMAGE MATE 4 ............................................................................................. 5
SCREEN AND ICONS...................................................................................................... 6
REMOTE CONTROL WINDOW....................................................................................... 8
CAPTURING A STILL IMAGE / VIEWING A STILL IMAGE ............................................. 9
RECORDING VIDEO / VIEWING VIDEO ........................................................................ 9
LIVE SETTINGS ..............................................................................................................11
SYSTEM REQUIREMENT.....................................................................................................11
TROUBLE SHOOTING ........................................................................................................14
BEFORE CONTACTING SUPPORT.............................................................................. 14
REFERENCE.......................................................................................................................16
DISCLAIMER.................................................................................................................. 16
TRADEMARKS............................................................................................................... 16

3
INTRODUCTION
GREETING
Thank you for purchasing ELMO Document Camera. This manual will guide you through using
Image Mate 4, the Document Camera controller software. Please read this manual carefully
before using Image Mate 4.
NOTE
・The sample screens shown in this manual may differ from those you see while using the
software.
・For the latest instruction manual, installation manual and firmware information, go to the
ELMO web site.
・When using Image Mate 4, be sure to refer to the instruction manual supplied with the
Document Camera.
・Depending on the OS, Image Mate 4 may not display the correct fonts.
・This software can only be used with our document camera.
(Cannot be used with other companies' document cameras)
INSTALLING / UNINSTALLING
●INSTALLING
1. Go to Elmo official website.
http://www.elmousa.com/
http://elmoeurope.com/en/html/download/02.php
2. Select "Image Mate 4".
3. Click "Download" and read the "Precautions on the handling of the downloaded data". Click
"Agree".
4. Downloading will start after a short while.
* If you cannot find the downloaded file, check the download folder of your computer.
5. Run "ImageMate4Setup.msi" after the downloading is completed. Follow the instructions
displayed in the installation window of Image Mate 4.
6. The icons [ ] will be created on the desktop after the installation is completed.
●UNINSTALLING

4
To remove Image Mate 4 from your computer, go to "Start menu" and go to "Settings" -
"System”-"Apps & features", and uninstall Image Mate 4.

5
Image Mate 4
STARTING IMAGE MATE 4
Start Image Mate 4 from a shortcut [ ] on the desktop.
Select the desired camera to display by the following procedure.
※The camera will not be recognized when it is not turned on. Connect the camera to a
running computer via the USB cable (bus power).
●HOW TO SELECT THE CAMERA
・The live image of the camera appears after Image Mate 4 is started when the Document
Camera is connected to a computer via the USB cable.
・The following Camera Selection window appears when a computer is connected to several
cameras via the USB cable.
＜Connection procedure＞
①Click the selected camera name.
②The connection status changes to “Connecting” [].
③The connection status changesto “Connected” [ ] after the connection is established.
*The software will cancel the selection and start to connect to the other selected camera if
the camera name of the other camera is selected after the connection is established.
*The connection will be disconnected if [ ] is pressed
④The camera selection window disappears and the live image of the camera appears.
Camera type
Camera name
Type (USB
/WiFi )
Connection
Connecting
Connected
Exit
Image Mate 4 may not start if the USB cable is connected before starting Image Mate 4.
Start Image Mate 4 before connecting the camera via the supplied USB cable.
CAUTION

6
SCREEN AND ICONS
The live image of the camera is displayed when Image Mate 4 is started.
Icon
Name
Function
Remote control
To display the remote control window.
Capture
To save the currently displayed image as a still image.
Start recording/
Stop recording
To start and stop recording.
Open
To open the destination folder of still image files or video
files recorded with Image Mate 4.
Freese
To pause the image. Click this icon again to resume the
image.
Rotate Image
To rotate the image by 180°.
※During the freeze can’t be rotation of the image.
Live Setting
To configure Resolution settings, Camera mode settings
and Camera settings.
Camera
selection
To display a list of connected cameras.
Select the camera to display.
Brightness (darken）
Brightness
（brighten）
Zoom In
Zoom out
Auto Focus
Reset Brightness
Control icons
P.10
P.10
P.12
P.9

7
Show version
To display the version information of the connected
Document Camera and Image Mate 4.
Exit
To close Image Mate 4.
A confirmation message will be displayed when this icon is
clicked. Click “OK” to close Image Mate 4.
Version information
The software license agreement will be displayed. Carefully read it
before using Image Mate 4.

8
REMOTE CONTROL WINDOW
You can control the Document Camera from the remote control window.
●Each function can be operated by pressing respective buttons.
●The remote control window can be moved by dragging.
Button
Name
Function
Auto Focus
To focus automatically.
Zoom in
To enlarge the image.
Zoom out
To shrink the image.
Brightness
(brighten)
To brighten the image.
Brightness
(darken)
To darken the image.
Reset Brightness
To return the brightness setting to factory
default setting.

9
CAPTURING A STILL IMAGE / VIEWING A STILL IMAGE
●CAPTURING A STILL IMAGE
The currently displayed image can becaptured and saved as a still image.
Astill image of the currently displayed image will be captured when [ ] is pressed.
The captured still image will be saved in a folder.
●VIEWING A STILL IMAGE
The destination folder of captured still images is [Pictures/ELMO Interactive Toolbox/rec].
The destination folder can be opened from [ ] in the control menu.
(※The destination folder may defer depending on the OS.)
1.Click [ ] in the menu to open the destination folder.
2.Double-click astill image file to view it.
RECORDING VIDEO / VIEWING VIDEO
●RECORDINGVIDEO
The currently displayed image of the Document Camera can be recorded and saved as a
video file. When a microphone is connected to a computer, you can also record audio.
Recording of the currently displayed image will be started when [ ] is pressed. The
recorded video filewill be saved in a folder.
※There are some limitations on saving the recorded video file in a folder.
Resolution
Live video
streaming
Recording
resolution
4：3
3M
2048ｘ1536 30fps
1280ｘ96030fps
13M
4160ｘ3120 21fps
1280ｘ960 30fps
16：9
720P
1280ｘ720 60fps
1280ｘ720 60fps
1080P
1920ｘ1080 30fps
1280ｘ720 30fps
1920ｘ1080 60fps
1280ｘ720 60fps
4K
3840ｘ2160 30fps
1280ｘ720 30fps

10
*The Start recording icon [ ] changes to the Stop recording icon during recording.
You can stop recording by pressing the Stop recording icon.
This icon appears during video recording.
The color of this icon changes between red and white during video
recording.
●VIEWING VIDEO（SAME DESTINATION FOLDER AS A STILL IMAGE）
1.Click [ ] in the menu to open the destination folder.
2.Double-click a video file to view it.
・Depending on the performance of your computer or type of the file, you may not be able to
view the captured still image or recorded video correctly.
・Depending on the playback environment, some video files recorded by Image Mate 4 may
not be played back.
・The recording time may differ from the created video time.
NOTE
⚫
Recording may not be performed correctly depending on the performance
of your computer or the network condition.
⚫The resolution will be changed according to the recording resolution
during recording.
⚫The performance may be degraded when connecting with the USB2.0.
CAUTION