Elo Touch Solutions PayPoint Plus Instruction Manual
DEVELOPER’S GUIDE
Elo Touch Solutions
PayPoint Plus®for Windows
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
2
Table of Contents
Section 1: Introduction............................................................................................................................................................................. 3
Section 2: Hardware ................................................................................................................................................................................ 7
Section 3: Software ................................................................................................................................................................................ 14
Section 4: Contact Information ............................................................................................................................................................ 17
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
3
Section 1: Introduction
Welcome
Welcome to the Elo PayPoint Plus Developer Program. We thank you for your partnership – together we can
shape the future of our Point of Sale capabilities.
Product Description
The Elo PayPoint Plus register is an all-in-one cash register that comes equipped with a built-in receipt printer,
magnetic stripe reader, barcode reader, cash drawer, and customer facing display. Below are the
specifications:
Area
PayPoint Plus Windows
Display
15.6” FHD
Touch
Projected Capacitive
Processor
Intel 8th generation i5 processor with vPRO
OS
Windows 10IOT, No OS (with Linux support: Ubuntu,
SUSE Linux)
Storage/Memory
16GB RAM/128SSD Hard Drive
Connectivity
WiFi 802.11 b/g/n/ac | Bluetooth 4.1 (BLE)/iBeacon |
LAN
IO panel
5x USB, 2xSerial, 1x Cash Drawer Port, 1x Micro HDMI
out, 1x 12V PUSB
Printer
Paper width: 80mm
Printer speed:250mm/sec
Star TSP100iii USB
Scanner
2D
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
4
Honeywell N3680
Cash Drawer
5 bill x 5 coin for NAChina
4 bill x 8 coin for Worldwide
3 position lock
MSR
3 track encryptable
Color
White (Black available as MTO)
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
5
Confidentiality
By partnering with Elo to integrate with Elo PayPoint Plus (“Register”), you agree you will:
a. Not share, disclose, use, disseminate, or publish any information about the Elo PayPoint Plus Developer Program or the
Register or any related SDK, code, software, firmware, API, or prototype to any third party for any reason other than as
permitted in writing from Elo under the Elo PayPoint Plus Developer Program.
b. Not share, disclose, or use the Register or any related SDK, code, software, firmware, API, or prototype for any reason
not related to or permitted under the Elo PayPoint Plus Developer Program.
c. Limit access to the Register and related SDK, code, software, firmware, API, or prototype and information about the
Register and any related SDK, code, software, firmware, API, or prototype and the Elo PayPoint Plus Developer Program
to your employees, Affiliates, and onsite consultants and their employees who (i) have a need to know about or use the
Register and related SDK, code, software, firmware, API, or prototype in connection with your participation in the Elo
PayPoint Plus Developer Program, and (ii) are obligated to you to maintain the security and confidentiality of the Elo
PayPoint Developer Program and the Register and related SKD, code, software, firmware, API, or prototype. You will be
responsible for each act and omission of each employee, Affiliate, onsite consultant, or employee of an onsite
consultant as if such acts and omissions were your own. As used herein, “Affiliate” means any entity that now or
hereafter controls, is controlled by or is under common control with a specified entity, where “control” means beneficial
ownership, directly or indirectly, of more than 50% of the outstanding shares or other ownership interest (representing the
right to elect directors or other managing authority or the right to make the decisions for such entity, as applicable),
only for so long as such control exists.
d. Use the same degree of care as you would use to protect your confidential, non-public or proprietary information and
technologies, but in any case no less than a reasonable degree of care, to prevent the unauthorized use,
dissemination, disclosure, or publication of information, guides, drawings, photographs, product specifications, data,
code, software, firmware, prototypes, API, SDK, or other similar information, documents, or materials about the Elo
PayPoint Plus Developer Program or the Register and related SDK, code, software, firmware, API, or prototype. For
clarity, this prohibition applies but is not limited to social media posts, links, or shares regarding the Elo PayPoint Plus
Developer Program, including your participation in the program.
e. Not make copies of the Register or any related SDK, code, software, firmware, API, or prototype or any related
documents or materials received from Elo in connection with the Elo PayPoint Plus Developer Program.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
6
f. Notify Elo of any unauthorized use, dissemination, publication or disclosure of information about the Elo PayPoint Plus
Developer Program or the Register or any related SDK, code, software, firmware, API, or prototype of which you
become aware.
g. Comply with applicable export control regulations.
h. Promptly, upon Elo’s request or at the end of the Elo PayPoint Plus Developer Program, return the Register to Elo.
i. Not use or reverse engineer the Register or any information you gather or develop through your use of the Register or
participation in the Elo PayPoint Plus Developer Program for development, manufacturing, distribution, or production
purposes.
j. Provide suggestions, comments, or other feedback (“Feedback”) to Elo about the Register. All Feedback shall be
deemed Elo’s property, and Elo shall be free to use, disclose, reproduce, license, distribute, or otherwise exploit
Feedback as it sees fit without obligation or restriction of any kind.
k. Adhere to the terms and conditions for use of the SDK.
l. Adhere to the terms and conditions for use of the API.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
7
Section 2: Hardware
Contents of the Box
The Register contains the following:
• PayPoint Plus for Windows (“Register”)
• Power Cable
• 1 receipt paper roll
• 2 cash drawer keys
• RJ45 to DB9 cable
• Quick install guide
• Windows 10 IOT or No OS (Linux support for Ubuntu, SUSE Linux)
The following utilities available on the device will allow you to download OPOS/JPOS drivers as well as configure
the peripheral:
• Star TSP100 futurePRNT Software – includes Windows Driver, Linux CUPS Driver, Configuration Utility, OPOS and JavaPOS
and hardware manuals. The TSP100 futurePRNT provides ESC/POS mode emulation, which can be configured in
“TSP100 Configuration Utility”. Thus, even if your current software is designed for the ESC/POS mode, you will be able to
use it as is, without making changes.
• Honeywell EZConfig – Honeywell’s EZConfig Cloud for Scanning is a free software service that facilitates fast and easy
barcode scanner configurations and firmware updates all in an intuitive interface
• Magtek reader configuration program – Magtek’s configuration program is a free utility that allows to remote
configuration and key injection services
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
8
PayPoint Plus Dimensions
Printer
The Register has a built in 3-inch thermal printer. The printer is a TSP100iii from Star Micronics and communicates via USB.
Below are the specs of the printer:
Printer Method
Thermal
Printer Speed
43 receipts/minute (250mm/sec)
Resolution
203dpi
Character set
ANK 95, 32 Int 128 Graphic plus Chinese, Japanese,
Korean, Taiwanese
Paper Specs
Width 80mm standard, 58mm with paper guide
Thickness 0.053 ~ 0.085 mm
Roll Diameter Up to 83 mm
Maxi Print Width 72mm
Auto Cutter
Guillotine
The integrated printer on PayPoint Plus has a paper feed and power button on top of the unit. To find the device name of
the printer, while holding the printer power button press the printer feed button and release the printer power button.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
9
The printer will print pertinent information relevant to the printer. Please find additional Star Micronics support topics
below: http://www.starmicronics.com/support/Default.aspx
Scanner
The PayPoint Plus unit has inbuilt 2D omni-directional scanner. The scan engine is an N3680 from Honeywell. Below are the
specs of the scanner:
Sensor
CMOS sensor with 640x480 pixel resolution
Illumination and Aiming
White LED illumination, Red dot aimer
Field of View
Horizontal: 37.8°, Vertical: 28.8°
Symbologies
Linear: Codabar, Code 11, Code 128, Code 2 of 5, Code
39, Code 93 and 93i, EAN/JAN-13, EAN/JAN 8, IATA Code
2 of 5, Interleaved 2 of 5, Matrix 2 of 5, MSI, GS1 Databar,
UPC-A, UPC E, UPC-A/EAN-13 with Extended Coupon
Code, Coupon GS1 Code 32(PARAF), EAN-UCC
Emulation, GS1 Data bar
2D Stacked: Codablock A, Codablock F, PDF417,
MicroPDF417
2D Matrix: Aztec Code, Data Matrix, MaxiCode, QR
Code, Chinese Sensible (Han Xin) code
Postal Codes: Australian Post, British Post, Canadian Post,
China Post, Japanese Post, Korea Post, Netherlands Post,
Planet Code, Postnet
The PayPoint Plus unit ships with a default of “on/off” mode on the 2D scanner.
The scanner default mode out of the box is:
• Virtual com port interface
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
10
• Manual Trigger mode (Hardware or software). A HW manual trigger button is located at the back of the
scanner
• Beep on scan
• Set up to read most common codes
If you would like to change the scanner to HID or keyboard mode, please scan the below:
You may need to change settings, configurations or modes on your scanner to fit your application needs. You
can make these changes in the following ways:
• Scan barcodes for common configuration changes (see page 9 to 14).
• Use exposed API’s to send serial based commands to scanner (see SDK documentation). Find serial
command list here (Page 10-3).
The 2D scanner is compatible with the following Honeywell plug-in’s (to be purchased separately). Please call
us if you are interested in using either of these plug-in’s in your POS app:
• Easy DL™ Plug-in: Honeywell's Easy DL™ scanning software plug-in parses barcode data found on
government-issued identification cards (US and Canada) to deliver ready-to-use information to the host
system. The embedded barcode parsing functionality can support applications including age
verification or automatic electronic form population. Easy DL reduces transaction time by 95%, scanning
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
11
and populating information in a matter of seconds. See the datasheet here.
• EasyBCBP™ TotalFreedom Plug-in: Honeywell’s EasyBCBP™ identity verification software plug-in parses
barcode data found on printed or mobile boarding passes for airport applications such as passenger
check-in, passenger boarding, security screening, club lounge entry and duty-free store entry. Powered
by Honeywell’s TotalFreedom® open-system architecture, EasyBCBP ID verification software eliminates
the need for host system software to process the encoded information contained within 2D barcodes
found on printed or mobile boarding passes. See datasheet here.
Cash Drawer
The cash drawer is built similar to a full-size industry standard with external dimensions of 411mm (width) x
420mm (depth) x 89mm (height). The cash drawer open is electrically driven through the printer mechanism
(Hence, Star’s SDK can be used to drive the cash drawer as well similar to a standard TSP100iii set up).
The US cash drawer insert features a 5 bill and 6 coin configuration. Each bill holder for the US is 168mm x 71mm
x 51mm tall. The bill holders are adjustable by +/- 6mm. The coin compartment is 86mm long x 58mm wide x
36mm tall. The worldwide cash drawer features a 4 bill and 8 coin configuration. Each bill holder for the
Worldwide cash drawer is 170mm x 91mm x 51mm tall. The coin compartment is 41mm long x 91mm wide x
36mm tall.
The Cash Drawer is secured with a 3 position lock – Locked, Open, open with SW trigger. The register will be sold
with 3 unique keys combinations (001, 002, 003). The key combination is visible and should match on the lock as
well as the key. We will make spare keys available for customers to purchase on as-needed basis.
This PayPoint Plus unit also features a second cash drawer port under the unit. This port allows an additional
cash drawer to be used with the PayPoint System. If you are using an APG cash drawer, you will need a cable
101A (APG) to run this second cash drawer.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
12
MSR
The PayPoint Plus unit features a 3-track encryptable MSR from Magtek. Below are the specs:
Swipe Speed
4~60 ips (10.1~152.4 cm/sec)
Swipe Direction
Bi-directional
# of tracks
3
Encryption
Default not encrypted. Can be encrypted to Level 3
with Elo’s API
Supported formats
ISO 7811, ISO 7810, AAMVA, CA DMV, ANSI
You will have the ability to encrypt the reader using Magtek’s configuration utility.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
13
Additional input/output ports
This Register features several ports at the bottom of the unit.
1
Power
2
Micro HDMI port
3
Mini USB port
4
12V USB port
5
USB ports
6
Ethernet port
7
RJ12 cash drawer
port
8
2x RJ45 serial ports
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
14
Section 3: Software
Overview
PayPoint Plus for Windows is available with WIN 10 IOT or without OS (Linux kernels tested by Elo – Ubuntu 16.04/18.04 and
SUSE Linux. Other Linux Kernels can be supported – please contact Elo for drivers and integration support).
How to download drivers:
Printer: Star TSP100iiiU
Windows: Star’s futurePRNT software allows you to download drivers and configure the printer. Click here to
download latest version (Version 7.4 is already installed on the Register). This software includes Windows Driver,
Linux CUPS Driver, Mac OS X CUPS Driver, Configuration Utility, OPOS and JavaPOS and hardware manuals.
The TSP100 futurePRNT provides ESC/POS mode emulation, which can be configured in “TSP100 Configuration Utility”. Thus,
even if your current software is designed for the ESC/POS mode, you will be able to use it as is, without making changes.
The functions (logo printing, journal, etc.) of the TSP100 futurePRNT remain usable even when you print in the ESC/POS
mode. For information about how to use the ESC/POS mode, refer to "4.18 Print Job Routing (Write Printer)" in the manual
for details.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
15
Click here for the user manual for Star’s FuturePRNT software for Windows
Linux: The following OS are supported by Star: Windows 10 IOT, Red Hat Enterprise Linux 7.4, openSUSE 42.3, ubuntu 18.04
LTS, CentOS 7.4, Fedora 17. Click here for the user manual and instructions to download LINUX drivers.
2D scanner: Honeywell N3680
Windows: Honeywell’s EZConfig software is a web based configuration utility that facilitates fast and easy barcode
scanner configurations and firmware updates all in an intuitive interface. Click here to download the latest version (a
version is installed on the Register).
Click here for a user guide that details the functionality of this configuration utility.
Click here for JPOS, OPOS, POSNET drivers
Linux: Instead of providing a dedicated USB COM Port driver for Linux, the Register supports the CDC-ACM
(Communications Device Class Abstract Control Model) protocol. This protocol is supported by Linux distributions with
kernel versions 2.6.14 and higher. This means that a USB COM Port connection can be established without the need for a
manufacturer's device driver. Within Linux, the CDC ACM driver is referred to as 'ttyACM' or sometimes just 'ACM'.
The linked document LINUX USB serial port emulation provides more detailed information to aid setting up and testing a
Linux USB serial connection.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
16
MSR: Magtek reader
Windows: the Magtek Reader Configuration Program is a configuration utility that allows for remote configuration
and key injection services. Click here to install the Magtek Reader Configuration Program.
Click here for user guide that details the functionality of this configuration program.
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
17
Section 4: Contact Information
Our team is on standby to provide any help or support during the process:. Please first reach out to Technical Support
team for any questions or assistance.
Relationship
Technical Support
Developer Support
© 2018 Elo Touch Solutions, Inc. All rights reserved.
PayPoint Plus Windows Developer Program
Document Revision A October 2018
18
To find out more about our extensive range of Elo touch solutions, go to www.elotouch.com, or call the office nearest you.
North America
Tel +1 408 597
8000
Fax +1 408 597
8001
customerservice@e
lotouch.com
Europe
Tel +32 (0)16 70
45 00
Fax +32 (0)16
70 45 49
elosales@eloto
uch.com
Asia-Pacific
Tel +86 (21)
3329 1385
Fax +86 (21)
3329 1400
www.elotouch
.com.cn
Latin America
Tel +52 55 2281-6958
www.elotouch.com
Other manuals for PayPoint Plus
2
Table of contents
Other Elo Touch Solutions Touch Terminal manuals
