elsner elektronik KNX PS640 Instruction manual

PowerSupplySystems
KNX PS640 and
KNX PS640 USB
Technical Data
and Installation Notes
ElsnerElektronikGmbH Steuerungs- und Automatisierungstechnik
Herdweg7 D-75391 Gechingen Germany
Phone.: [phone] Fax: [phone]
[e-mail] www.elsner-elektronik.de

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
2
ThePowerSupplySystems KNXPS640 and KNXPS640 USB delivera29 Vbusvoltage
fortheKNXsystemand24 VDCsupplyvoltagefor24 Vdevices.Specialoperating
conditionssuchasshort circuit, overvoltage, overloadorexcess temperatureare
recordedandmaybereadoffonthedisplay. Thepresent powerdischargeisdisplayed
as well.Itispossibletoresettheconnectedbusdevicesdirectlybymeansofthekey
pad.
Functions:
·Deliversa 29V KNXbusvoltage (reduced), outputcurrentmax.640 mA, short-
circuitproof
·Delivers 24 VDC (not reduced), outputcurrent max.150 mA
·Reset ofalinedirectlyon thedevice
·Recordofoperatinghours,overload, externalovervoltage,internalovervoltage,
short circuit andexcesstemperature
·Displayofoperating databusvoltage,buscurrent andtemperatureofthedevice
·Thedisplay may beshowninGerman,English, SpanishorDutch
·Only KNX PS640 USB:USB interface forbusaccessviaPC
Technical data
Housi
ng
Plasticmaterial
Colour
White
Mounting
Snap
-
on fittingon mounting rails
Protection category
IP20
Dimensions
approx. 123x89 x61 (WxHxD,mm),7widthunits
Weight
approx. 370g
Ambienttemperature
Operation
-
5…+45 °C,
s
torage
-
25…+70°C
Amb
ientairhumidity
max.95%RH, avoidbedewing
Operatingvoltage
230 VAC , 50Hz
PowerconsumptionStandby
approx. 2
.
3W
Outputs
•
KNXbusvoltage29V(reduced),
Output currentmax.640 mA, short-circuitproof
•24VDC (notreduced),Output currentmax.150 mA
Thefollowingstandardshave beenconsideredfortheevaluationoftheproductin
termsofelectromagneticcompatibility:
Transient emissions:
·EN 60730-1:2000SectionEMV(23,26,H23,H26) (thresholdcategory: B)
·EN 50090-2-2:1996-11+A1:2002-01(thresholdcategory: B)
·EN 61000-6-3:2001 (thresholdcategory: B)
Interferenceresistance:
·EN 60730-1:2000SectionEMV(23,26,H23,H26)
·EN 50090-2-2:1996-11+A1:2002-01

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
3
·EN 61000-6-1:2004
Theproducthas beentestedfortheabove mentionedstandardsbyanaccreditedEMV
laboratory.
Installationand Commissioning
Attention! Mains voltage! Thelegalnational regulations
must becompliedwith.
Installation,inspection,commissioning andtroubleshooting ofthepowersupply
system mustonlybecarriedoutbyacompetentelectrician.Disconnectall lines tobe
assembled, andtake safetyprecautionsagainst accidentalswitch-on.
Thepowersupplyisexclusivelyintendedforappropriateuse.Witheachinappropriate
changeornon-observance oftheinstructionsforuse,anywarrantyorguaranteeclaim
willbevoid.
Afterunpacking thedevice,check immediatelyforanymechanicaldamages.Incase of
transport damage,thismustimmediatelynotifiedtothesupplier.
If damaged, thepower supplysystem must not beput
intooperation.
If anoperationwithoutriskmay supposedlynotbeguaranteed,theplantmustbeput
out ofoperationand besecuredagainst accidentaloperation.
Thepowersupplysystem mustonlybeoperatedas stationarysystem,i.e.onlyina
fittedstateand aftercompletion ofallinstallation and start-up works,and onlyinthe
environmentintendedforthispurpose.
ElsnerElektronikdoesnotassume anyliabilityforchanges instandardsafter
publicationofthisinstructionmanual.
Installation
Observethecorrectinstallation.Incorrectinstallation maydestroythepowersupply
systemorconnectedelectronicdevices.

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
4
Housing
1Bus(KNXterminal+/-)
2Bus(KNXterminal+/-)
3Input operating voltage
230 VAC,L/N / PE
4USB interface
(onlyKNXPS640 USB)
5Output direct currentvoltage
24 VDC,+/-
Connections3and5aresuitable
forsolidconductorsupto1.5mm²
orconductorswithfinewires.
Scheme
Auxiliarysupply24V DC
(max. 150 mA)

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
5
Operation
Starting Position
Thefollowingmaybereadoffandseton thedisplayofthepowersupplysystemKNX
PS640:
·Reset of aline
·Recallofthedatamemorywithoperatinghours,overcharge,external electrical
surge,internalelectrical surge,short circuitandexcesstemperature
·Recalloftheoperating databusvoltage,buscurrentand temperature
·Languageofdisplay
Thedisplay isdimmedafter60 secondsifduring thisperiodno keyispressed.
Linereset
Standardscreen:
Press key once.
Press key once moreinordertogetintothesector“Linereset”.
Move thecursor(flashing rectangleatrightedge)tothedesiredsetting withthekeys
or and confirmwithkey .
Yes:Resetisactivated.Thelineisswitchedtoneutraland shorted.The
basicsettingdisplays: “Resetisactive!”
No:Resetnotactivated.Thepowersupplysystem worksinnormal
operation.
elsnerelektronik
KNXPowerSupply
NormalOperation
Diagnostics>
Reset:Yes™
No
30seconds
Resetnotactive!
LineReset>™
DataMemory >
OperatingData>
Language
elsnerelektronik
KNXPowerSupply
NormalOperation
Diagnostics>

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
6
30 seconds:Aresetof30 secondsisstarted.Afterwards,thelineissupplied
withvoltageas usual. Duringtheresetstate,whichlasts30
seconds,thebasicsetting displays:“Resetactive:XX sec”
(countdown).
Withkey , you returntothepreviousmenu level.
Datamemory
Standardscreen:
Press key once.
Move thecursor(flashing rectangleatrightedge)tothe“Datamemory” menu withthe
keys and and confirmwithkey .
Move thecursortothedesiredmenuwiththeup and downkeysandpress key .
Operating hours
Theoperating hoursofthepowersupplysystem are
displayedinyears, daysand hours.
Withkey you returntothepreviousmenulevel.
Overload
Thenumberof overloadincidentsand thetotal time in
days, hoursandminutes aredisplayed.
Withkey you returntothepreviousmenulevel.
elsnerelektronik
KNXPowerSupply
NormalOperation
Diagnostics>
Shortcircuit>
ExcessTemperat.>
HoursofOperation>™
Overload>
Ext.Overvoltage>
Int.Overvoltage>
LineReset>
DataMemory >™
OperatingData>
Language>
Runtime:0years
0day0hrs.
<=Back
Over
loaddetected
0times. Duration:
0day. 0hrs.0min
<=Back

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
7
External Overvoltage
Thenumberofexternalovervoltageincidentsis
displayed.
Withkey you returntothepreviousmenulevel.
Internal Overvoltage
Thenumberofinternalovervoltageincidentsis
displayed.
Withkey you returntothepreviousmenulevel.
Short Circuit
Thenumberofshortcircuitincidentsatthebusis
displayed.
Withkey you returntothepreviousmenulevel.
Excess Temperature
Thenumberofexcesstemperatureincidentson the
circuitboardofthedevice isdisplayed.
Withkey you returntothepreviousmenulevel.
Operating data
Standardscreen:
Press key once.
Move thecursor(flashing rectangleatrightedge)tothe“OperatingData” menu with
thekeys and and confirmwithkey .
elsnerelektronik
KNXPowerSupply
NormalOperation
Diagnostics>
BusVoltage29.4V
BusCurrent320 mA
Temperature42.1°C
LineReset>
DataMemory >
OperatingData>™
Language>
ExternalOvervoltage
wasdetected
0times.
<=Back
InternalOvervoltage
wasdetected
0times.
<=Back
Ashortatthebus
wasdetected
0times.
<=Back
ExcessTemperature
ontheboard
wasdetected
0times!

PowerSupplySystemsKNXPS640(USB) Version: 155.05.2013 Subjecttotechnicalchanges.Errorsexcepted.
8
Thecurrent valuesof
·Busvoltage
·Buscurrent
·Temperatureonthecircuitboardofthedevice
aredisplayed.
Withkey you returntothepreviousmenulevel.
Language
Standardscreen:
Press key once.
Move thecursor(flashing rectangleatrightedge)tothe“Language” menu withthe
keys and and confirmwiththekey .
Move thecursortothedesiredlanguagewiththeup and downkeysand press thekey
. Thedisplay automaticallyjumpstothepreviousmenu inthedesiredlanguage. With
key you getbackbyonemenuleveltothebasicsetting.
elsnerelektronik
KNXPowerSupply
NormalOperation
Diagnostics>
Sprache :Deutsch™
Language:English
Idioma:Espanol
Taal:Hollands
LineReset>
DataMemory >
OperatingData>
Language>™