elsner elektronik Salva KNX TH Owner's manual

Salva KNX TH, Salva KNX basic
Smoke alarm
Installation and Operation
EN
Elsner Elektronik GmbH Control and Automation Engineering
Sohlengrund 16
75395 Ostelsheim Tel. [phone] / 30 945-0 [e-mail]
Deutschland Fax [phone] www.elsner-elektronik.de
Technical Service +49 (0) 70 33 / 30 945-250

1 Contents
Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany
Smoke alarm Salva KNX • ETS programme version 1.0
Status: 09.09.2016. Errors excepted. Subject to technical changes.
1. Description ........................................................................................... 5
1.0.1. Deliverables ................................................................................................... 6
1.1. Technical specifications ........................................................................................... 6
1.1.1. Accuracy of temperature/humidity measurement ..................................... 7
2. Installation and commissioning ........................................................... 7
2.1. Installation notes ...................................................................................................... 7
2.2. Installation location .................................................................................................. 8
2.2.1. Equipping the building with smoke alarms ................................................ 8
2.2.2. Positioning and distances ............................................................................ 8
2.3. Device design ......................................................................................................... 10
2.3.1. Exterior view ............................................................................................... 10
2.3.2. Skirting ......................................................................................................... 11
2.3.3. Interior view of the housing ....................................................................... 11
2.4. Installing the device ............................................................................................... 12
2.4.1. Instructions for assembly and initial start-up ........................................... 12
2.4.2. Assembly preparation and skirting assembly .......................................... 12
2.4.3. Connection .................................................................................................. 13
2.4.4. Completing the installation ........................................................................ 14
3. Addressing the equipment ................................................................. 14
4. Maintenance ....................................................................................... 14
4.1. Function test ........................................................................................................... 15
4.2. Replace the battery ................................................................................................ 15
4.2.1. Types of batteries ....................................................................................... 16
4.2.2. Serial number .............................................................................................. 17
5. Device alarm functions ...................................................................... 17
5.1. Alarm mute (acknowledgement) .......................................................................... 17
5.2. Alarm memory ....................................................................................................... 17
5.3. Operating and alarm signals ................................................................................. 17
6. Transfer protocol ............................................................................... 19
6.1. List of all communication objects ......................................................................... 19
7. Setting the parameters for all models ............................................... 32
7.1. Behaviour on power failure/ restoration of power .............................................. 32
7.2. General settings ..................................................................................................... 32
7.3. Smoke alarm ........................................................................................................... 32
7.4. Variable comparator .............................................................................................. 37
7.4.1. Control variable comparator 1/2/3/4 .......................................................... 37
7.5. Computer ................................................................................................................ 38
7.5.1. Computer 1-8 ............................................................................................... 38
7.6. Logic ........................................................................................................................ 42
7.6.1. AND logic 1-8 and OR logic outputs 1-8 ................................................... 42
7.6.2. AND logic connection inputs ..................................................................... 44
7.6.3. Connection inputs of the OR logic ............................................................. 46
8. Temperature and humidity parameters .............................................. 48

2 Contents
Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany
Smoke alarm Salva KNX • ETS programme version 1.0
Status: 09.09.2016. Errors excepted. Subject to technical changes.
8.1. Temperature Measurement ................................................................................... 48
8.2. Temperature threshold values .............................................................................. 48
8.2.1. Threshold value 1, 2, 3, 4 ........................................................................... 49
8.3. Temperature PI control .......................................................................................... 51
8.3.1. Heating control level 1/2 ............................................................................. 56
8.3.2. Cooling control level 1/2 ............................................................................. 59
8.4. Summer Compensation ......................................................................................... 61
8.5. Humidity Measurement ......................................................................................... 62
8.6. Humidity threshold values .................................................................................... 63
8.6.1. Threshold value 1, 2, 3, 4 ........................................................................... 63
8.7. Humidity PI control ................................................................................................ 65
8.8. Dewpoint measurement ........................................................................................ 68
8.8.1. Cooling medium temp. monitoring ........................................................... 68
8.9. Absolute humidity .................................................................................................. 70
8.10.Comfort field .......................................................................................................... 71

3 Clarification of signs
This manual is amended periodically and will be brought into line with new software
releases. The change status (software version and date) can be found in the contents footer.
If you have a device with a later software version, please check
www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-
date version of the manual is available.
Clarification of signs used in this manual
Installation, inspection, commissioning and troubleshooting of the device
must only be carried out by a competent electrician.
Safety advice.
Safety advice for working on electrical connections, components,
etc.
DANGER! ... indicates an immediately hazardous situation which will lead to
death or severe injuries if it is not avoided.
WARNING! ... indicates a potentially hazardous situation which may lead to
death or severe injuries if it is not avoided.
CAUTION! ... indicates a potentially hazardous situation which may lead to
trivial or minor injuries if it is not avoided.
ATTENTION! ... indicates a situation which may lead to damage to property if it is
not avoided.
ETS In the ETS tables, the parameter default settings are marked by
underlining.

4 Clarification of signs