Embraer EMB-505 Phenom User manual

HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
EMB-505
GROUND HANDLING
AND
SERVICING HANDBOOK
GHSH-3261
20 NOVEMBER 2009
REVISION 3 - 24 FEBRUARY 2011
Copyright © 2011 by EMBRAER S.A. All rights reserved. The information, technical data, designs and drawings
in this document are proprietary information of Embraer or third parties and shall not be used or disclosed to
any third party nor copied or reproduced, whether in whole or in part, in any form or by any means whatsoever
without the express written authorization of Embraer.
TM
ÀREA DE NÃO INTERFERÊNCIA

HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
CUSTOMER COMMENT FORM
Please use this Customer Comment Form to notify us of any discrepan-
cies or problems you encounter in our Technical Publications. We would
also welcome constructive suggestions on how we can further improve
our documentation or service.
Your feedback will be acknowledged, and we will advise you of the
action we intend to take.
Sincerely,
Embraer Technical Publications.

HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
CUSTOMER COMMENT FORM
Please Specify:
Publication Part Number: ...................................................................................
Chapter: .................................. Revision:.......................... Date:.......................
Comment/Suggestion:........................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
Your Name: ................................................ Department: ..................................
Company Name: ................................................................................................
Address: .............................................................................................................
Fax Number: ................................... Telephone Number: ..................................
E-mail: ............................................. Website: ...................................................
Please return this Customer Comment Form to:
EMBRAER S.A.
TECHNICAL PUBLICATIONS
Av. Brigadeiro Faria Lima, 2170
CEP 12227-901
São José dos Campos SP-BRASIL
FAX: ++ 55 12 3927-7546
E-mail: [e-mail]
Website: www.embraer.com.br
CCF Nº ..........................................
Comment received:................................... Date Acknowledged:.......................
Person Actioned:................................................................................................
Action to be taken:.............................................................................................
...........................................................................................................................
...........................................................................................................................
Proposed date for implementation:....................................................................
Implemented:.....................................................................................................
This Space Reserved for Embraer

HIGHLIGHTS Page 1 of 2
Feb 24/11
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
EMPRESA S.A.
AV. BRIGADEIRO FARIA LIMA, 2170 - CAIXA POSTAL 8050 - TELEFONE (55) 12 3927-7517
FAX [phone] - CEP 12.227-901 - SÃO JOSÉ DOS CAMPOS - SÃO PAULO - BRASIL
e-mail:[e-mail]/http://www.embraer.com
TO: HOLDERS OF PUBLICATION No. GHSH-3261 - “GROUND HANDLING
AND SERVICING HANDBOOK”, APPLICABLE TO EMB-505 AIRCRAFT.
REVISION No. 03 DATED FEBRUARY 24/11
HIGHLIGHTS
Pages which have been added, revised, or deleted by the current revision are indi-
cated by an asterisk, on the List of Effective Pages.

EFFECTIVITY: ALL LIST OF EFFECTIVE PAGES
Page LEP-1
Rev.03- FEB 24/11
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
GROUND HANDLING AND
SERVICING HANDBOOK
CHAPTER
SECTION PAGE DATE
SUBJECT
FRONTMATTER
LOEP...........................* LEP-1 .............. Feb 24/11
LOEP...........................* LEP-2 .............. Feb 24/11
LOEA........................... LEA-1 .............. Nov 20/09
LOEA............................ LEA-2 ..Blank.. Nov 20/09
INTRODUCTION ...... INTRO-1 ............ Nov 20/09
INTRODUCTION....... INTRO-2 ............ Nov 20/09
INTRODUCTION....... INTRO-3 ............ Nov 20/09
INTRODUCTION....... INTRO-4 ............ Nov 20/09
INTRODUCTION....... INTRO-5 ............ Nov 20/09
INTRODUCTION....... INTRO-6 ............ Nov 20/09
INTRODUCTION ...... INTRO-7 ............ Nov 20/09
INTRODUCTION....... INTRO-8 ............ Nov 20/09
INTRODUCTION....... INTRO-9 ............ Nov 20/09
INTRODUCTION....... INTRO-10 .......... Nov 20/09
INTRODUCTION....... INTRO-11 .......... Nov 20/09
INTRODUCTION....... INTRO-12 .......... Nov 20/09
PROCEDURE
TOC................................. 001 .............. Nov 20/09
TOC................................. 002 .............. Nov 20/09
TOC................................. 003 .............. Nov 20/09
TOC................................. 004 ...Blank.. Nov 20/09
09-10-01-500-801-A ........ 201 ............. May 28/10
09-10-01-500-801-A ........ 202 .............. Nov 20/09
09-10-01-500-801-A ........ 203 .............. Nov 20/09
09-10-01-500-801-A ........ 204 .............. Nov 20/09
09-10-01-500-801-A ........ 205 .............. Nov 20/09
09-10-01-500-801-A ........ 206 .............. Nov 20/09
10-10-00-500-801-A ........ 201 .............. Nov 20/09
10-10-00-500-801-A ........ . 202 ............. May 28/10
10-10-00-500-801-A ........ 203 .............. Nov 20/09
10-10-00-500-801-A ........ 204 .............. Nov 20/09
10-10-00-500-801-A ........ 205 .............. Nov 20/09
10-10-00-500-801-A ........ . 206 ............. May 28/10
10-10-00-500-801-A ........ 207 ............. May 28/10
10-10-00-500-801-A ........ . 208 ............. May 28/10
10-10-00-500-801-A ........ . 209 ............. May 28/10
10-10-00-500-801-A ........ . 210 ............. May 28/10
10-10-00-500-802-A ........ 201 .............. Nov 20/09
10-10-00-500-802-A ........ 202 ...Blank.. Nov 20/09
10-20-00-500-801-A ........ . 201 .............. Nov 20/09
10-20-00-500-801-A ........ . 202 .............. Nov 20/09
10-20-00-500-801-A ........ . 203 ............. . Nov 20/09
10-20-00-500-801-A ........ . 204 ............. . Nov 20/09
10-30-00-500-801-A ........ 201 .............. Nov 20/09
10-30-00-500-801-A ........ 202 .............. Nov 20/09
10-30-00-500-801-A ........ 203 .............. Nov 20/09
10-30-00-500-801-A ......... 204 .............. Nov 20/09
10-30-00-500-802-A ........ 201 .............. Nov 20/09
10-30-00-500-802-A ........ 202 .............. Nov 20/09
10-30-00-500-802-A ........ 203 .............. Nov 20/09
10-30-00-500-802-A ........ 204 ...............Nov 20/09
10-30-00-500-802-A ........ 205 ...............Nov 20/09
10-30-00-500-802-A ........ 206 ...Blank...Nov 20/09
12-11-00-650-801-A ........ 301 .............. Nov 20/09
12-11-00-650-801-A ........ 302 .............. Nov 20/09
12-11-00-650-801-A ........ 303 .............. Nov 20/09
12-11-00-650-801-A ........ 304 .............. Nov 20/09
12-11-00-650-802-A ........ 301 .............. Nov 20/09
12-11-00-650-802-A ........ 302 .............. Nov 20/09
12-11-00-650-802-A ........ 303 .............. Nov 20/09
12-11-00-650-802-A ........ 304 .............. Nov 20/09
12-11-00-650-803-A ........ 301 .............. Nov 20/09
12-11-00-650-803-A ........ 302 .............. Nov 20/09
12-11-00-650-803-A ........ 303 .............. Nov 20/09
12-11-00-650-803-A ........ 304 .............. Nov 20/09
12-11-00-650-803-A ........ 305 ...............Nov 20/09
12-11-00-650-803-A ........ 306 ...Blank...Nov 20/09
12-11-00-680-801-A ........ 301 .............. Nov 20/09
CHAPTER
SECTION PAGE DATE
SUBJECT
12-11-00-680-801-A........ 302.............. Nov 20/09
12-11-00-680-801-A........ 303.............. Nov 20/09
12-11-00-680-801-A........ 304.. .Blank.. Nov 20/09
12-12-00-210-801-A ....... 301.............. Nov 20/09
12-12-00-210-801-A ....... 302.............. Nov 20/09
12-12-00-210-801-A ....... 303.............. Nov 20/09
12-12-00-210-801-A ....... 304... Blank.. Nov 20/09
12-12-00-612-801-A ....... 301.............. Nov 20/09
12-12-00-612-801-A ....... 302.............. Nov 20/09
12-12-00-612-801-A ....... 303.............. Nov 20/09
12-12-00-612-801-A ....... 304.. Blank.. Nov 20/09
12-14-00-610-801-A ....... * 301.............. Feb 24/11
12-14-00-610-801-A ....... * 302.............. Feb 24/11
12-14-00-610-801-A ....... 303.............. Nov 20/09
12-14-00-610-801-A ....... 304.............. Nov 20/09
12-15-01-613-801-A ....... 301.............. Nov 20/09
12-15-01-613-801-A ....... 302.............. Nov 20/09
12-15-01-613-801-A ....... 303.............. Nov 20/09
12-15-01-613-801-A ....... 304.............. Nov 20/09
12-15-03-600-801-A ....... 301.............. Nov 20/09
12-15-03-600-801-A ....... * 302.............. Feb 24/11
12-15-03-600-801-A ....... * 303.............. Feb 24/11
12-15-03-600-801-A ....... 304.............. Nov 20/09
12-15-03-600-801-A ....... 305.............. Nov 20/09
12-15-03-600-801-A ....... 306... Blank.. Nov 20/09
12-23-00-100-801-A ....... 301.............. Nov 20/09
12-23-00-100-801-A ....... 302.............. Nov 20/09
12-23-00-100-801-A ....... 303.............. Nov 20/09
12-23-00-100-801-A ....... 304.............. Nov 20/09
12-23-00-100-801-A ....... 305.............. Nov 20/09
12-23-00-100-801-A ....... . 306... Blank.. Nov 20/09
12-23-00-100-802-A ....... 301.............. Nov 20/09
12-23-00-100-802-A ....... 302.............. Nov 20/09
12-23-00-100-802-A ....... 303.............. Nov 20/09
12-23-00-100-802-A ....... 304.............. Nov 20/09
12-23-00-100-802-A ....... 305.............. Nov 20/09
12-23-00-100-802-A ....... 306.............. Nov 20/09
12-23-00-100-802-A ....... 307.............. Nov 20/09
12-23-00-100-802-A ....... 308.............. Nov 20/09
12-23-00-100-802-A ....... 309.............. Nov 20/09
12-23-00-100-802-A ....... 310.............. Nov 20/09
12-23-00-100-802-A ....... 311.............. Nov 20/09
12-23-00-100-802-A ....... 312.............. Nov 20/09
12-23-00-100-802-A ....... 313.............. Nov 20/09
12-23-00-100-802-A ....... 314.............. Nov 20/09
12-23-00-100-802-A ....... 315.............. Nov 20/09
12-23-00-100-802-A ....... 316.............. Nov 20/09
12-23-00-100-802-A ....... 317.............. Nov 20/09
12-23-00-100-802-A ....... 318.............. Nov 20/09
12-23-00-100-802-A ....... 319.............. Nov 20/09
12-23-00-100-802-A ....... . 320... Blank.. Nov 20/09
20-00-00-910-801-A ....... 201.............. Nov 20/09
20-00-00-910-801-A ....... 202.............. Nov 20/09
20-00-00-910-801-A ....... 203.............. Nov 20/09
20-00-00-910-801-A ....... 204.............. Nov 20/09
20-40-02-910-801-A ....... . 201.............. May 28/10
20-40-02-910-801-A ....... . 202.............. May 28/10
20-40-02-910-801-A ....... 203.............. May 28/10
20-40-02-910-801-A ....... 204.............. Nov 20/09
24-36-01-000-801-A ....... 401.............. Nov 20/09
24-36-01-000-801-A ....... 402.............. Nov 20/09
24-36-01-000-801-A ....... 403.............. Nov 20/09
24-36-01-000-801-A ....... 404.............. Nov 20/09
24-36-01-000-801-A ....... 405.............. Nov 20/09
24-36-01-000-801-A ....... 406... Blank.. Nov 20/09
24-36-01-000-802-A ....... 401.............. Aug 27/10
24-36-01-000-802-A ....... 402.............. Nov 20/09
24-36-01-000-802-A ....... 403.............. Nov 20/09
24-36-01-000-802-A ....... 404.............. Nov 20/09
24-36-01-400-801-A ....... 401.............. Nov 20/09
24-36-01-400-801-A ....... 402.............. Nov 20/09
Pages revised or added by current revision are indicated by an asterisk (*). Pages deleted by the current revi-
sion are indicated by (Del)*. Pages deleted by the previous revision are indicated by (Del).

EFFECTIVITY: ALL LIST OF EFFECTIVE PAGES
Page LEP-2
Rev.03- FEB 24/11
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
GROUND HANDLING AND
SERVICING HANDBOOK
CHAPTER
SECTION PAGE DATE
SUBJECT
24-36-01-400-801-A........ 403 .............. Nov 20/09
24-36-01-400-801-A........ 404 ...Blank.. Nov 20/09
24-36-01-400-802-A........ 401 .............. Aug 27/10
24-36-01-400-802-A........ 402 .............. Nov 20/09
24-36-01-400-802-A........ 403 .............. Nov 20/09
24-36-01-400-802-A........ 404 .............. Nov 20/09
24-41-00-860-801-A........ 201 .............. Nov 20/09
24-41-00-860-801-A........ 202 .............. Nov 20/09
24-41-00-860-801-A........ 203 .............. Nov 20/09
24-41-00-860-801-A........ 204 .............. Nov 20/09
24-41-00-860-802-A........ 201 .............. Nov 20/09
24-41-00-860-802-A........ 202 .............. Nov 20/09
24-41-00-860-802-A........ 203 .............. Nov 20/09
24-41-00-860-802-A........ 204 .............. Nov 20/09
27-04-01-710-801-A........ 501 .............. Nov 20/09
27-04-01-710-801-A........ 502 .............. Nov 20/09
28-00-00-910-801-A........ 201 .............. Nov 20/09
28-00-00-910-801-A........ 202 .............. Nov 20/09
28-00-00-910-801-A........ 203 .............. Nov 20/09
28-00-00-910-801-A........ 204 ..Blank... Nov 20/09
29-10-00-910-801-A........ 201 .............. Nov 20/09
29-10-00-910-801-A........ 202 .............. Nov 20/09
29-10-00-910-801-A........ 203 .............. Nov 20/09
29-10-00-910-801-A........ 204 .............. Nov 20/09
29-10-00-910-801-A........ 205 .............. Nov 20/09
29-10-00-910-801-A........ 206 .............. Nov 20/09
29-10-00-910-802-A........ 201 .............. Aug 27/10
29-10-00-910-802-A........ 202 .............. Aug 27/10
29-10-00-910-802-A........ 203 .............. Aug 27/10
29-10-00-910-802-A........ 204 .............. Aug 27/10
29-10-00-910-802-A........ 205 .............. Aug 27/10
29-10-00-910-802-A........ 206 ..Blank... Aug 27/10
29-10-00-910-802-A.. Del 207 .............. Aug 27/10
29-10-00-910-802-A.. Del 208 .............. Aug 27/10
32-00-00-910-801-A........ 201 .............. Nov 20/09
32-00-00-910-801-A........ 202 .............. Nov 20/09
32-45-00-210-801-A........* 601 .............. Feb 24/11
32-45-00-210-801-A........* 602 .............. Feb 24/11
32-45-00-210-801-A........* 603 .............. Feb 24/11
32-45-00-210-801-A........ 604 .............. Aug 27/10
32-45-00-210-801-A........ 605 .............. Aug 27/10
32-45-00-210-801-A........ 606 ...Blank...Nov 20/09
71-00-01-910-803-A........ 201 .............. Nov 20/09
71-00-01-910-803-A........ 202 .............. Nov 20/09
71-00-01-910-803-A........ 203 ............. May 28/10
71-00-01-910-803-A........ .204 .. Blank...May 28/10
APPENDIX
GSE TOC ..................... ..TOC-1 ........... Nov 20/09
GSE TOC ........................TOC-2..Blank. Nov 20/09
GSE 003.......................... ........1 .......... Nov 20/09
GSE 003................... ...............2 ............Nov 20/09
GSE 009................... .............. 1............ Nov 20/09
GSE 009................... .............. 2............ Nov 20/09
GSE 016......................... ........ 1............ Nov 20/09
GSE 016......................... ........ 2............ Nov 20/09
GSE 016......................... ........ 3............ Nov 20/09
GSE 016......................... ........ 4.Blank . Nov 20/09
GSE 022................... .............. 1............ Nov 20/09
GSE 022................... .............. 2............ Nov 20/09
GSE 023......................... ........ 1............ Nov 20/09
GSE 023......................... ........ 2............ Nov 20/09
GSE 026................... .............. 1............ Nov 20/09
GSE 026................... .............. 2............ Nov 20/09
GSE 027................... .............. 1............ Nov 20/09
GSE 027................... .............. 2............ Nov 20/09
GSE 029................... .............. 1............ Nov 20/09
GSE 029................... .............. 2............ Nov 20/09
GSE 030................... .............. 1............ Nov 20/09
GSE 030................... .............. 2............ Nov 20/09
CHAPTER
SECTION PAGE DATE
SUBJECT
CPA.............................. .. CON-1 .......... Nov 20/09
CPA.............................. .. CON-2 .......... Nov 20/09
Pages revised or added by current revision are indicated by an asterisk (*). Pages deleted by the current revi-
sion are indicated by (Del)*. Pages deleted by the previous revision are indicated by (Del).

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL GHSH List of Effective Aircraft
Page LEA-1/2
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.
THIS MANUAL IS APPLICABLE TO ALL PHENOM 300
EXECUTIVE JETS IN OPERATION.

GROUND HANDLING AND
SERVICING HANDBOOK
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFOREUSING,MAKESURETHISHARDCOPYISTHELATESTISSUE.
INTRODUCTION

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL INTRODUCTION
Page INTRO-1
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
GHSH INTRODUCTION
1. General
A. This handbook is intended to assist ground handling and servicing personnel
that are not familiar with the Embraer Phenom 300 aircraft. The Embraer Phe-
nom 300 Aircraft Maintenance Manual contains detailed maintenance or
inspection information.
B. This handbook is a supplement to the Aircraft Maintenance Manual (AMM)
and the Airplane Flight Manual (AFM). In case of conflict between this guide
and the AMM and / or AFM, the AMM and / or AFM shall take precedence.
C. The source of all information in this manual is, basically, the information in the
publications listed below:
(1) Aircraft Maintenance Manual (AMM).
(2) Illustrated Tool and Equipment Manual (ITEM).
(3) Consumable Products Catalog (CPC).
2. The improvement of methods and development of new techniques by the opera-
tors are contributions to be included in this manual. If you have suggestions or
need any assistance regarding maintenance technical publications, please con-
tact us at:
• [e-mail] - For contributions/request for assistance regard-
ing technical subjects related to Maintenance Technical Publications, GSE,
Service Bulletins, AIPC and SRM I;
• [e-mail] - For assistance regarding purchase and distribution
of manuals;
• [e-mail] - For assistance regarding Digital Technical
Publications contained in electronic media.
3. It is vital that the operators commit themselves to keeping this manual update by
strictly inserting the revised pages in the proper locations according to the last
revision of manual available in the FlyEmbraer site.
4. The GHSH is composed by (Figure 1):
A. The front matter:
(1) Front Page
Shows the manufacturer's masthead, identification of the manual, the ini-
tial issue date, and revision number and date.
(2) Customer Comment Form
(3) List of Effective Aircraft
Provides a cross-reference tabulation of Aircraft Commercial Designation,
Customer Aircraft Number, and Manufacturer Serial Number.
(4) List of Effective Pages:
Lists all chapters and their list of effective pages with the latest issue dates.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

EFFECTIVITY: ALL INTRODUCTION
Page INTRO-2
NOV 20/09
GROUND HANDLING AND
SERVICING HANDBOOK
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
NOTE: • Pages revised or added by the current revision are indicated
by an asterisk (*).
• Pages deleted by the current revision are indicated by del *.
Pages deleted by the previous revision are indicated by del.
(5) Title of Introduction
(6) Introduction
B. GHSH Procedures
The GHSH procedures section is composed by:
(1) Procedures Title Page
(2) Table of Contents
(3) GHSH Procedures
(a) The GHSH procedures are organized into chapters:
Table 1 – GHSH Chapters
(b) PDF Page Identification and Numbering
The GHSH task numbering is shown in the top of the body page and in
the skirting board page, and is composed as follows:
1. Top of Body Page
GHSH TASK 12-11-00-650-801-A
Elements 1, 2, and 3 comprise the equipment identifier. The fourth
element is the three-digit function code, which defines the mainte-
nance function being performed by tasks. The fifth element is a
three-digit number used to create unique numbers for all tasks, which
are similarly numbered through the first four elements. Tasks are
numbered from 801 through 999. The sixth element is an alphabetic
identifier (task) used to uniquely identify differences in configuration,
methods / techniques, variations of standard practices applications,
etc.
2. Skirting Board Page
Chapter Number Chapter Title
9Towing & Taxing
10 Parking, Mooring, Storage & Return to Service
12 Servicing
20 Standard Practices-Airframe
24 Electrical Power
27 Flight Controls
28 Fuel
29 Hydraulic Power
32 Landing Gear
71 Engine
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL INTRODUCTION
Page INTRO-3
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
The task numbering shown in the skirting board page shows the
body page numbering followed by the page block numbering, that is
used to inform the type of procedure to be executed.
12-11-00-650-801-A/300
The table below lists the pageblocks and their respective names:
Table 2 - GHSH PageBlocks
C. GHSH Appendixes
(1) Appendix Title Page
(2) GSE (Ground Support Equipments) Title Page
(3) TOC GSE
(4) GSE (Ground Support Equipments)
(a) The GSE Appendix is composed of the GSE's referenced in the GHSH
tasks.The GSE Appendix is arranged in GSE number increasing order.
For information about other GSE's used in the Phenom 100, please
check the Illustrated Tool and Equipment Manual (ITEM).
(5) Consumable Products Title Page
(6) Consumable Products
(a) The Consumable Products Appendix is composed of a table which
lists all the consumable products referenced in the GHSH tasks. The
Consumable Products Appendix is arranged in part number alphabeti-
cal order. The Consumable Products Appendix provides the following
information about consumables:
1. PART NUMBER Column
This column provides the product part number and/or trade name.
When the product does not have a part number, its specification is
repeated in this column.
2. SPECIFICATION Column
This column gives the specification with which the material must
comply. A simple dash in this column denotes that the product does
not meet any specification or that only the product referred to in this
PageBlock Name PageBlocks
System Description Section 000
Component Location 100
Maintenance Practices 200
Servicing 300
Removal/Installation 400
Adjustment/Test 500
Inspection/Check 600
Cleaning/Painting 700
Repairs 800
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

EFFECTIVITY: ALL INTRODUCTION
Page INTRO-4
NOV 20/09
GROUND HANDLING AND
SERVICING HANDBOOK
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
catalog shall be used.
3. DESIGNATION Column
This column presents a brief description of the material.
4. SUPPLIER Column
This column lists the names of the most usual suppliers of the
material.
5. SHELF LIFE Column
This column gives the period of time (in months) between the fabri-
cation date and the last date when the conditions for use of the
product are still assured, providing the material is packed and
stored as specified.
6. DANGER CLASS Column
This column gives the product danger class according to the Inter-
national Air Transportation Association (IATA) - Dangerous Goods
Regulations.
7. STORAGE CODE Column
This column lists codes referring to the conditions that assure the
proper preservation of the consumable products during their storage
period.
NOTE: The information from the manufacturer/supplier shall
always prevail over the one herein.
The table Storage Conditions gives the codes associated with the
conditions under which each product must be stored. This table
presents the following requirements:
a. Temperature
This column gives the proper ambient temperature, both in Cel-
sius and Fahrenheit degrees, to store a product. It may give a
range of temperature (4 to 38 °C, for example) or the maximum
allowable temperature (25 °C (maximum), for example).
b. Away From
This column gives the products/conditions from which the item
should stay away in order to guarantee its adequate preserva-
tion. The following table gives the storage conditions.
Table 3 - Storage Code
Storage Code Temperature Away From
01 4 to 38 °C (39 to 100 °F)
Fuel, Ozone and/or spark generat-
ing devices Moisture, Dust, Oil,
Grease, Direct Sunlight, Fluores-
cent Light, Air in Circulation.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL INTRODUCTION
Page INTRO-5
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
Table 3 – Storage Code (Continued)
Storage Code Temperature Away From
02 25 °C (MAX.)(77°F (MAX))
Sources of heat, Ozone and/or
spark generating devices, Oxi-
dants, Dust, Oil, Fuel, Water,
Direct Sunlight, Air in Circulation.
04 4 to 38 °C (39 to 100 °F)
Sources of heat, Spark generating
devices, Oxidants, Dust, Direct
Sunlight.
07 4 to 38 °C (39 to 100 °F)
Sources of heat, Spark generating
devices, Oxidants, Oxygen cylin-
ders.
08 4 to 38 °C (39 to 100 °F)
Sources of heat, Spark generating
devices, Oxidants, Corrosive acid,
Direct sunlight.
09 25 °C (MAX)(77 °F (MAX)) Sources of heat, Dust, Oil,Grease,
Direct sunlight.
10 4 to 38 °C (39 to 100 °F) Sources of heat, Dust, Oil,
Grease, Direct sunlight.
11 25 °C (MAX)(77 °F (MAX))
Sources of heat, Ozone and/or
spark generating devices, Dust,
Vibrations, Magnetic fields, Air in
circulation.
12 4 to 38 °C (39 to 100 °F)
Sources of heat, Spark generating
devices, Oxidants, Corrosive
base, Direct sunlight.
13 4 to 38 °C (39 to 100 °F) Sources of heat, Spark generating
devices, Oxidants, Direct sunlight.
14 4 to 38 °C (39 to 100 °F) Sources of heat, Spark generating
devices, Oxidants, Direct sunlight.
15 4 to 38 °C (39 to 100 °F)
Sources of heat, Spark generating
devices, Corrosive acid and base,
Direct sunlight.
16 According to local regulatory authorities and manufacturer.
17 25 °C (MAX)(77 °F (MAX)) Electrostatic fields, Magnetic
fields, Dust, Direct sunlight.
50 According to local manufacturer/supplier.
99 4 to 38 °C (39 to 100 °F)
Sources of heat, Ozone and/or
spark generating devices, Dust,
Vibrations, Magnetic fields, Corro-
sive acid and base, Oxidants,
Flammable liquids, Explosives.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

EFFECTIVITY: ALL INTRODUCTION
Page INTRO-6
NOV 20/09
GROUND HANDLING AND
SERVICING HANDBOOK
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
The figure 1 shows the GHSH manual structure.
GHSH Manual Structure
Figure 1
TM
GROUND HANDLING
AND
SERVICING HANDBOOK
Copyright 2008 by EMBRAER − Empresa Brasileira de Aeronáutica S.A. All rights reserved. This document
shall not be copied or reproduced, whether in whole or in part, in any form or by any means without the express
without permission of Embraer.
written authorization of Embraer. The information, technical data, designs and drawings disclosed in this docu−
ment are proprietary information of Embraer or third parties and shall not be used or disclosed to any third party
CUSTOMER COMMENT FORM
PROCEDURES TITLE PAGE
LIST OF EFFECTIVE AIRCRAFT
LIST OF EFFECTIVE PAGES
INTRODUCTION TITLE
INTRODUCTION
PROCEDURES TABLE OF CONTENTS
PROCEDURES
APPENDIX TITLE PAGE
GROUND SUPPORT EQUIPMENT APPENDIX
TITLE PAGE
GSE APPENDIX TABLE OF CONTENTS
GROUND SUPPORT EQUIPMENTS
CONSUMABLE PRODUCTS APPENDIX
TITLE PAGE
CONSUMABLE PRODUCTS APPENDIX
EM500ENGHSH000024A.DGN
EMB−505
GHSH−3261
14 AUGUST 2009
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

GROUND HANDLING AND
SERVICING HANDBOOK
EFFECTIVITY: ALL INTRODUCTION
Page INTRO-7
NOV 20/09
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
D. Revisions
(1) Revisions to the GHSH are issued for the whole manual.
(2) A list of effective pages is provided for the whole manual. The pages that
are revised, added, or deleted by the current revision will be identified on
the list of effective pages by an asterisk.
(3) When texts or art in illustrations are revised, a black bar will appear in the
page left-side margin, beside the revised, added, or deleted material. For
PDF files, a bar beside the page number or the section title and the print-
ing date indicates that neither the text nor the illustration has been
changed, but the material has been relocated to a different page or a
totally new page has been added.
D. Tools, Equipment and Auxiliary Items
(1) Aircraft Zones (Figure 2)
The GHSH procedures may refer to a zone to give the references neces-
sary for the identification of the service areas or components. The figure 2
illustrates the zones location.
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.

EFFECTIVITY: ALL INTRODUCTION
Page INTRO-8
NOV 20/09
GROUND HANDLING AND
SERVICING HANDBOOK
Copyright © by EMBRAER S.A - All rights reserved - See title page for details.
Aircraft Zones
Figure 2
EMB − 505
EM500ENGHSH000023A.DGN
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.