Emdoor EM-T50 User manual

EM-T50 Android system
user manual
Thanks for your to choose the new Rugged Handheld.
This guide serves to enable users to get to know and familiar with our product as soon as
possible. Here we have made a brief introduction to the key layout and definitions in figures
and words. And a brief explain for the basic operating functions.
1. File version information ............................................................................................................ 2
2. Device performance structure ............................................................................................ 3-4
3. Device initialized setting ...................................................................................................... 5-6
4. System settings ..................................................................................................................... 7-16
Content

File Version Information02
File Name EM-T50 Android 11 User Manual
File No 0001
Issue Date 2021-07-07
Edition
Page
Change Log
Serial
Number
Change
Number Version Change Date Change Content Maintenance Department
1 YDXX-01 V1.0 2021-07-07 First published
Customer
Service FAE
Department
V1.0

Device Performance Structure
Device Performance Structure 03
6
15
16
3
5
1
42
9
8
7
13
14
18
17
10
11
12
11

Device Performance Structure
04
1.Barcode Scanner —— Support one-dimensional code/two-dimensional code
scanning.
2.Micro USB —— Micro USB 2.0 can exchange data through the data cable, and
can also charge the rugged handheld.
3.Pogo pin —— Used to connect the charging base, expand USB and the network
port/charging interface.
4.Headphone jack —— 3.5mm standard Earphone Audio output Interface.
5.Microphone —— Receive the voice of the speaker and convert the voice signal
into electrical signal.
6.TP —— 5 points Capacitive, G+FF, Corning Gorilla Glass 3.
7.Function key —— Home key, setting key, F1 key with built-in screen capture
function, F2 key with built-in camera photo taking function.
8.Front Camera —— 5.0MP, support photo and video.
9.Receiver —— Listen to the other person's voice when making a phone call.
10.Volume keys —— Decrease/increase volume. Press this key to raise the volume
from 0 to 100, and the volume will be automatically set to 0 again after rising to
100.
11.Scan key —— Open the scan shortcut key.
12.Power button —— Press to start or close the screen display. You can use this
button to put the rugged phone into sleep mode, or wake up from sleep mode.
13.Speaker —— Built in speaker for playing video and music, built-in 8 Ω/1W,
waterproof speaker x 1.
14.Rear lid lock —— Lock the back cover to protect the battery.
15.Flash Lamp —— Adjust the brightness of the light when taking pictures.
16.Rear Camera —— 13.0MP, support photo and video, support PDAF.
17.NFC sensing area —— Built in battery cover, read sensor card data.
18.Battery cover —— Protect the battery.

1. Initial Desktop
Slide the arrow up and go to the desktop, as below picture.
Device Initialized Setting
Device Initialized Setting 05