Emos RAP CT KARGO Bange User manual

[i�P]
RAP INTELLIGENT
VEHICLE OPERATION
MANUAL
CT
KARGO
Bange

1
Introduction
It is our responsibility to provide you with high safety products. In
addition, in order to enable you to get familiar with the functions of the
vehicle more quickly and ensure safe and comfortable driving, we have
compiled this manual.
This manual clearly introduces the knowledge of safe driving and
vehicle functions as a guide for your safe driving. But in actual driving, you
also need to use and adjust it according to the actual situation.
All the data and specifications in this manual are up-to-date until the
manual is printed. As the company will continue to upgrade and redesign
the vehicle, the equipment and performance of the subsequent models will
be subject to change without notice.
We believe that this manual will give you the correct guidance for your
driving, and also hope that you will attach this manual when you transfer
your vehicle.
Thank you very much for
purchasing RAP intelligent
vehicle.

2
Notes to Users
Notes to users
In this manual, you will see warnings about personal safety or possible
damage to the vehicle.Please follow the instructions in the warnings when
operating the vehicle to avoid personal injury or damage to the vehicle.
Unless otherwise stated, the instructions in this manual regarding the
vehicle orientation (front, rear, left and right) are subject to the driving
direction of the vehicle.
The warning types, layouts and methods of use in this manual are as
follows:
Danger
◆Be alert to high risks and ignoring such information could be life-
threatening.
Warning
◆Be alert to moderate risks and ignoring such information may lead to
injury.
Note
◆Pay attention to minor hazards and ignoring such information may
cause vehicle damage.
Environmental protection
◆Environmental protection instructions.
Arrow indication operating
Indicates the direction of operation
(e. g. pushing upward, pulling
downward, turning left, moving
right, shaking back and forth, etc.).

3
Charging deviceOperation guideDriving guideMaintenance
Emergency treatment
Technical data
Table of Contents
Introduction.......................... 1
Notes to users ..................... 2
1 Charging Device
Charging instructions........... 6
Charging precautions ...............6
On-board charging device ........7
Charging method................. 9
Household single-phase
AC charging..............................9
Charging pile single-phase
AC charging...........................10
Battery ............................... 12
Power battery .........................12
2 Operation Guide
Instrumentation.................. 16
Combination meter view.........16
SOC electricity meter .............17
Voltage display .......................17
Current display .......................17
Tachometer.............................17
Speedometer..........................17
Mileage display.......................18
Gear display ...........................18
Clock display ..........................19
Combination meter indicator
/ warning light .........................19
Driving computer ....................21
Keys and doors.................. 25
Mechanical key.......................25
Anti-theft system.....................25
Wiper and light................... 27
Wiper switch ...........................27
Light distribution view .............28
Light switch.............................30
Seat ................................... 33
Seat cushion...........................33
Backrest .................................33
Driving aid.......................... 34
Rearview mirror ......................34
Rearview radar .......................34
Reversing image ....................36
Swing system .........................37
Storage device................... 38
Storage box under the seat ....38
File bag...................................38
Other devices .................... 39
Storage hook ..........................39
USB interface .........................39
12V power supply...................40
3 Driving Guide
Preparation........................ 42
Run-in period..........................42
Preparation before driving ......42
Directional handle...................43

4
Table of Contents
Horn........................................44
RAP sound simulation ............44
Start driving ....................... 45
Ignition switch.........................45
Shifting system .......................46
Manual brake..........................47
Parking brake .........................47
Starting vehicle.................. 48
Starting ...................................48
Parking ...................................48
Driving and environment.... 50
Driving essentials ...................50
Drive in special weather .........50
4 Maintenance
Daily maintenance............. 54
Vehicle corrosion
protection................................54
Vehicle cleaning ....................55
Additional maintenance ..... 57
Brake fluid ..............................57
Cleaning solution....................58
Tire .........................................59
5 Emergency treatment
Important information......... 62
Hazard warning lamp .............62
Triangular warning board........62
Reflective vest ........................63
Basic hand tools .....................64
Contingency processing .... 65
Unable to start ........................65
If the vehicle is trapped ..........65
Vehicle traction .......................66
Tire burst ................................67
Fire emergency processing
plan.........................................68
High pressure component ......70
Fuse .......................................71
6 Technical data
Information......................... 76
Vehicle parameters.................76
Prompting message........... 79
Vehicle identification
code........................................79
Nameplate of entire
vehicle ....................................79
Motor model and serial
number ...................................80
Warning sticker.......................80

Charging device
1 Charging device
This chapter will introduce information
on charging methods and charging
precautions to ensure that your vehicle has
good maneuverability at all times.

6
Charging instructions
Charging precautions
◆Please charge with the dedicated charging device provided by RAP
Intelligent Vehicle:
» Do not modify, disassemble or repair the charging device.
» Do not use extra wires or adapters to avoid the risk of fire or electric
shock.
» Please stop charging immediately when the charging fails or there is
an abnormality.
» Please do not use the charging device when the protective package is
cracked or any damage is revealed.
» Do not allow minors to touch or use charging devices, and do not let
minors approach during use.
» Please do not pull the cable directly to move the charging device.
When you move it, please handle it gently.
◆Please choose to charge in a relatively safe environment (such as
avoiding liquids, fire sources, etc.).
◆The arc may occur during charging. Do not expose to flammable gases
and keep them ventilated to avoid danger.
◆If the vehicle needs to be parked for a long time without using, please
charge the vehicle first.
◆When charging, please make sure that the charging plug is in good
contact with the charging socket, otherwise it will lead to safety accidents.
◆Before starting the vehicle, please make sure that the charging device
has been disconnected and the charging port cover has been closed.
◆If you need to travel on a rainy day while your vehicle is running low and
needs to be charged, we advise you to properly operate according to the
following requirements when using outdoor charging devices:
» Choose a higher location to park and recharge to prevent the battery
from soaking in the water.

7
Charging device
Charging instructions
» When charging, the water near the charging port should be cleaned to
prevent the water from entering the charging port. When plugging or
unplugging the charging connector, be sure to cover it with rainproof
equipment to prevent rainwater from splashing into the charging
connector and charging port.
» Check and remove any water and stains that may exist in the charging
connector plug.
Warning
◆Please ensure that the charging interface is dry and free of foreign
matter before charging. Otherwise, it may cause short circuit or electric
shock or even cause fire during charging, which may cause serious
personal injury or property damage.
◆To avoid serious personal injury, do not touch the charging terminal or
the metal terminal inside the charging connector while the vehicle is
charging.
◆Do not use wet hand to plug or remove the plug, otherwise it may cause
electric shock and personal injury.
On-board charging device
1
2
3
1Power plug
2Charging cable
3Charging connection plug

8
Charging instructions
Note
◆Do not use the charging device in the sun or in a closed environment.
◆Do not modify the charging device without permission, otherwise it will
be prone to danger.
◆Please wait for the vehicle to enter the normal charging state before
leaving.

9
Charging device
Charging method
Household single-phase AC charging
Note
◆◆When using household single-phase AC charging, use a special
socket with safety protection devices such as leakage protection
devices and air switches, and avoid sharing the line with other
household appliances.
The household single-phase AC charging method is as follows:
1. The ignition switch is in the "OFF" position.
2. Press the charging port cover
on the left side of the vehicle to
open the vehicle charging port
cover.
3. Connect the power plug of the power supply end.
4. Push the air switch up. (lead
acid version)

10
Charging method
5. Lift up the dust cover of the
charging port and connect the
charging plug to the charging
port. The instrument lights
up the charging connection
indicator, and the electricity
meter switches to the charging
animation state (the lead
acid version has no charging
animation, and the lithium version has charging animation).
6. When charging is complete, unplug the charging connection plug.
7. Confirm that the dust cover of the charging port is properly closed and
close the charging cover of the vehicle.
8. Disconnect the power plug of the power supply end, arrange the on-
board charging device, and place it properly to complete charging.
Charging pile single-phase AC charging
Charging pile single-phase AC charging method is as follows:
1. Set the ignition switch to the "OFF" position.
2. Press the charging port cover on the left side of the vehicle to open the
vehicle charging port cover.
3. Lift the dust cover of the charging port, push the air switch up (lead acid
version), connect the power plug of the power supply end or the built-in
power plug of charging pile.
4. Connect the charging connection plug with the charging port, set the
charging pile parameters, and start charging according to the setting of
charging pile (such as swiping card).
5. The instrument lights up the charging connection indicator, and the
electricity meter is switched to the charging animation state.
6. When charging is complete, unplug the charging plug.

11
Charging device
Charging method
7. Confirm that the dust cover of the charging port is properly closed and
close the charging port cover of the vehicle.
8. Disconnect the power plug of the power supply end, arrange the
charging device, and place it properly to complete charging.
Note
◆The above charging method is a general charging method, which may
be slightly different from the actual charging method introduced by the
charging pile. Please use the method prompted by the charging pile for
actual charging.

12
Battery
Power battery
◆The main power source of the RAP intelligent vehicle is the power
battery, which can be recharged repeatedly. However, when the power
battery is less than 25%, it needs to be charged as soon as possible to
prolong the battery life.
◆For new vehicles, when the power battery is in a normal state, due to
different driving habits (such as frequent acceleration and deceleration),
road conditions (such as long-term climbing) and temperature (such as
low temperature), the endurance mileage of the vehicle will be properly
reduced, which is a normal phenomenon.
◆The time required for the completion of the power battery charging is
affected by the charging power, remaining battery capacity, battery
temperature, vehicle use time and ambient temperature.
◆In order to keep the power battery in an optimal state, please fully charge
the power battery regularly.
◆The battery cannot be put on hold for a long time, and it should be
charged at least once a month. Otherwise, it will greatly affect the battery
life. In severe cases, the battery will be scrapped.
◆The power battery is located under the chassis of the vehicle. When
driving the vehicle, care should be taken to avoid hitting or flooding the
power battery.
◆The battery is a special chemical product that needs to be properly used
and maintained. Daily operation of fully charging or discharging (only
suitable for lead acid battery, lithium battery better be kept in medium
power) is critical to its performance maintenance. At the same time,
due to chemical characteristics, the phenomenon of natural attenuation
of battery capacity exists. Therefore, the mileage may be reduced for
vehicles that have been in use for some time.

13
Charging device
Battery
Warning
◆The power battery is a high-voltage component. Non-factory personnel
should not open or repair the power battery without permission.
Environmental protection
◆The recovery of the power battery must be carried out by a qualified unit
to avoid environmental pollution and injury to the operator.
Power battery recovery requirements and procedures
The power battery is a high-voltage component that is easy to cause
environmental pollution. If it is improperly disassembled, it may cause
electric shock injuries and environmental pollution. For the disposal of old
and abandoned batteries, please contact the local dealer, we will handle
according to the specified procedures.


Operation guide
2 Operation Guide
This chapter will introduce you to all
the equipment related to driving safety and
comfort, so that you can get familiar with
your vehicle quickly to reduce the driving
safety hazards.

16
Instrumentation
Combination meter view
9
11
6
5
4
31 2
8 7
10
1Tachometer 7Gear display
2Speedometer 8Mileage display
3Indicator light / warning light 9Current display
4Clock display 10 Voltage display
5Multimedia display interface 11 SOC electricity meter
6Call status display

17
Operation guide
Instrumentation
SOC electricity meter
◆The SOC electricity meter displays the current battery level.
◆The display range of the SOC electricity meter is 0 ~ 100% and its
display refreshes once every 10s. The digital and columnar double
display battery capacity. When SOC is between 0 and 24%, the columnar
display is red, and the voice indicates "low battery capacity". When SOC
is between 24% and 100%, the columnar display is blue.
Voltage display
◆Used to display the real-time voltage of the battery in V (volts).
◆The voltage display range is from 0 to 999V, and the display is refreshed
once for every 1s.
Current display
◆Used to display the real-time current of the battery in A (ampere).
◆The current display range is from 0 to 320A, and the display is refreshed
once for every 1s. The charging current is negative and the discharge
current is positive.
Tachometer
◆The tachometer is used to display the real-time speed of the motor in r/
min (rotation per minute).
◆The display range of the tachometer is 0 ~ 8000r/min.
Speedometer
◆The speedometer is used to display the current speed of the vehicle in

18
Instrumentation
km/h (kilometers per hour).
◆The display range is 0~99km/h, the speed unit and speed limit can be set
in the menu. When the speed is invalid, the normal color (white) figure
shows the speed is 0. When the speed is effective, the normal color
figure displays the speed; when the vehicle speed indication is greater
than or equal to the speed alarm setting value, the digital display speed
becomes red; when the vehicle speed indication is greater than or equal
to the speed alarm setting value, the text indicates that the speed is too
high.
Mileage display
ODO
◆Shows the total number of miles traveled by the vehicle.
◆The display range of ODO is 0~999999km. When the total mileage
exceeds the maximum display value, the total odometer stops
accumulating and the display stays at the maximum display value.
Trip
◆The trip shows the total mileage traveled since the last trip reset.
◆The trip display range is 0~999.9km. When the maximum display value is
exceeded, it will be automatically cleared and accumulated and displayed
from 0.
Mileage display switching and clearing
◆Short press the set button to switch between the ODO and the trip
interface.
◆Trip clearing: trip interface, long press the set button for 3s.
Gear display
◆Display the gear information in the current state, such as N/D/R.
◆When in "R" gear position, if the vehicle is provided with reverse image

19
Operation guide
Instrumentation
and sensor, the information of reverse image and sensor will be
displayed by the instrument first.
Clock display
◆It is used to display the current time, the clock can be set in the menu
settings.
Combination meter indicator / warning light
Left/right turn indicator Position light indicator
High beam indicator Rear fog light indicator
Low beam indicator Charging connection
indicator
READY
READY indicator Motor fault indicator
Low battery indicator Power limit indicator
P
Parking brake indicator
Left / right turn indicator
◆When the turn light is turned on, the turn light and the turning indicator
on the corresponding side flashes at the same time; When the turn light
is turned off, the turn light and the turning indicator on the corresponding
Table of contents