Emtek Keyed Pocket Door Mortise Lock User manual

Installation Guide - Keyed Pocket Door Mortise Lock, Traditional Trim
Install Lock Body Install Drive Bar Cylinder Mount Outside Plate
Mount Inside Plate
Install Trim Plate
Thread Key Cylinder
Install Door Jamb
Tighten Drive Bar Cylinder
See template for door prep
specications
Inside
Note: Notch on cylinder must be in the 9 o’ clock
position when fully screwed into lock body.
Use Cylinder Key to thread Drive Bar Cylinder
clockwise on interior side of door.
Install Key Cylinder by
threading it clockwise
onto lock body plate
Key Cylinder notch
must be at the 3 o’clock
position when fully
screwed in lock body. Tighten locking screw to engage
notch on cylinder
See template for door jamb
prep specications
Drill two 7/64”
pilot holes
7
5
8
6
4
3
2
1
IN4-POCKETMORTISEKYD REV. 18A 2/22/18

Installation Guide - Keyed Pocket Door Mortise Lock, Modern Trim
Install Lock Body Install Drive Bar Cylinder Mount Outside Plate
and Thread Key Cylinder
Mount Inside Plate
Install Trim Plate Install Door Jamb
See template for door prep
specications
Inside
Note: Notch on cylinder must be in the
9 o’ clock position when fully screwed
into lock body.
See template for door jamb
prep specications
Inside
Outside
Drill two 7/64”
pilot holes
6
5
7
4
3
2
1
Install Key Cylinder by
threading it clockwise
onto lock body plate
Key Cylinder notch must be at the 3
o’clock position when fully screwed
in lock body.
Tighten Drive Bar Cylinder
Tighten locking screw to engage
notch on cylinder
Use Cylinder Key to thread Drive Bar Cylinder
clockwise on interior side of door.
IN4-POCKETMORTISEKYD REV. 18A 2/22/18