Encore ENH908-NWY Owner's manual

ENH908-NWY
8 Port Switch
ENCORE EN908-NWY is a powerful, high-performance, Fast Ethernet switching hub with
all ports capable of 10Mbps or 100Mbps auto-negotiation operations (NWAY) which means
the ENH908-NWY automatically negotiates with the connected partners on the network
speed and duplex mode. It is ideal for micro-segmenting large networks into smaller
connected subnets for improved performance, enabling the bandwidth demanding
multimedia and other imaging applications.
Moreover, the 10/100Mbps auto-sensing ability provides an easy way migrating 10Mbps to
100Mbps LAN with no hassle compare to the shared 10Mbps or 100Mbps LAN. The
ENH908-NWY switching hub delivers a dedicated 10/100Mbps connection to every
attached client with no bandwidth congestion issue.
The ENH908-NWY also supports auto MDI/MDI-X crossover cable function. This means
that all ports can be used to connect another switch or hub using a straight-through or a
cross-over RJ-45 UTP cable. Store-and-forward switching mode promises a low latency
plus eliminates all the network errors, including Run and CRC error packets. ENH908NWY
is a pure plug-n-play device, no software to install and configure and full compliance with all
kinds of network protocols.

Features:
•Complies with 10BASE-T specifications of the IEEE802.3 standard
• Complies with 100BASE-TX specifications of the IEEE802.3u standard
• All ports are RJ-45 type for the 100Base-TX and 10Base-T connections
• Supports NWAY protocol for speed (auto sensing 10/100Mbps), and duplex mode
Half or Full auto-detection on all ports
• Supports MDI/MDI-X auto crossover
• Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
• Wire-speed packet filtering and forwarding rate
• Store-and-forward architecture filters fragment & CRC error packets
• Supports 1K MAC address entries
• 768KBytes buffer memory
• Supports extensive LED indicators for network diagnostics
• External power adapter