Encore ENHGS-500 User manual

ENHGS-500
5-Port Gigabit Switch
The ENHGS-500 5-Port Switch is a powerful and high-performance 10/100/1000
Mbps Gigabit Ethernet switch. It comes with five 10/100/1000 Mbps Gigabit
Ethernet RJ-45 ports. Moreover, it can provide a backbone link to your switched
Workgroup or a server fat-pipe link. With flexible architecture, users can easily
implement a wired network without bandwidth limitations.
The ENHGS-500 5-Port Switch is fully non-blocking architecture and supports
every switching port with wire-speed performance. Compared to the shared
10/100/1000 Mbps networks. The switch delivers a dedicated 10/100/1000 Mbps
connection to every attached client with no bandwidth congestion issue. Store-
and-forward switching mode promises a low latency plus eliminates all the
network errors, including runt and CRC error packets.
The ENHGS-500 5-Port Switch provides half and full-duplex capability on all
ports to boost bandwidth for servers and power users and is fully compliant with
all kinds of network protocols. Moreover, the rich diagnostic LED’s on the front-
panel provide the operating status of individual port and whole system.

Key Features:
•Complies with 10BASE-T specifications of the IEEE802.3 standard
•Complies with 100BASE-TX specifications of the IEEE802.3u standard
•Complies with 1000BASE-T specifications of the IEEE802.3ab standard
•5 X 10/100/1000 Mbps RJ-45 NWAY ports
•Supports NWAY protocol for speed (10/100/1000Mbps) and duplex mode
(Half/Full) auto-detection
•Supports MDI/MDI-X auto crossover
•Supports full and half duplex operation on all ports
•Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
•Wire-speed packet filtering and forwarding rate
•Store-and-forward architecture filters fragment & CRC error packets
•Supports 1K MAC address entries in whole system
•832K bits buffer memory
•Supports 12K Byte Jumbo frame
•Supports extensive LED indicators for network diagnostics
•External power adapter
•FCC VCCI Class A, CE, VCCI, RoHS
Specifications:
Standard
IEEE802.3, IEEE802.3u, IEEE802.3ab and IEEE802.3x standards
Interface
5x 10/100/1000Mbps RJ-45 switching ports
NWAY Protocol Support
10Mbps: Full/Half duplex
100Mbps: Full/Half duplex
1000Mbps: Full duplex only
Emission
FCC Class A, CE, VCCI
Rich LED indicators
Power: Green
Link/Act: Green
Operating Temperature
00- 400C (320- 1040F)
Operating Humidity
10% ~ 90% (non-condensing)
Dimensions
121 x 75 x26 mm
Power Supply
External power 5V DC / 1.0 Amp