Endress+Hauser Cerabar S PMC71 User manual

BA00303P/00/EN/13.11
71139808
valid from Software version:
03.00.zz
Operating Instructions – Description of Device Functions
Cerabar S PMC71, PMP71/75
Deltabar S FMD76/77/78, PMD70/75
Deltapilot S FMB70
Process pressure / Differential pressure, Flow / Hydrostatic

Overview of documentation Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
2Endress+Hauser
Overview of documentation
Device Documentation Content Remarks
Cerabar S
FOUNDATION
Fieldbus
Technical Information TI00383P Technical data
– The documentation can be found on the
documentation CD supplied.
– The documentation is also available on the
Internet.
→ See: www.endress.com → Download
Operating Instructions
BA00302P
– Identification
– Installation
– Wiring
– Operation
– Commissioning, description of Quick Setup menus
– Maintenance
– Troubleshooting and spare parts
– Appendix: illustration of menus
Operating Instructions
BA00303P
– Examples of configuration for pressure and level
measurement
– Description of parameters
– Troubleshooting
– Appendix: illustration of menus
Brief Operating Instructions
KA01025P
– Installation
– Wiring
– Local operation
– Commissioning
– Description of Quick Setup menus
Fold-out brochure KA00252P – Wiring
– Operation without display
– Description of Quick Setup menus
–HistoROM
®/M-DAT operation
Device Documentation Content Remarks
Deltabar S
FOUNDATION
Fieldbus
Technical Information TI00382P Technical data
– The documentation can be found on the
documentation CD supplied.
– The documentation is also available on the
Internet.
→ See: www.endress.com → Download
Operating Instructions
BA00301P
– Identification
– Installation
– Wiring
– Operation
– Commissioning, description of Quick Setup menus
– Maintenance
– Troubleshooting and spare parts
– Appendix: illustration of menus
Operating Instructions
BA00303P
– Examples of configuration for pressure and level
measurement
– Description of parameters
– Troubleshooting
– Appendix: illustration of menus
Brief Operating Instructions
KA01024P
– Installation
– Wiring
– Local operation
– Commissioning
– Description of Quick Setup menus
Fold-out brochure KA00252P – Wiring
– Operation without display
– Description of Quick Setup menus
–HistoROM
®/M-DAT operation

Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus Overview of documentation
Endress+Hauser 3
Device Documentation Content Remarks
Deltapilot S
FOUNDATION
Fieldbus
Technical Information TI00416P Technical data
– The documentation can be found on the
documentation CD supplied.
– The documentation is also available on the
Internet.
→ See: www.endress.com → Download
Operating Instructions
BA00372P
– Identification
–Installation
–Wiring
–Operation
– Commissioning, description of Quick Setup menus
– Maintenance
– Troubleshooting and spare parts
– Appendix: illustration of menus
Operating Instructions
BA00303P
– Examples of configuration for pressure and level
measurement
– Description of parameters
– Troubleshooting
– Appendix: illustration of menus
Brief Operating Instructions
KA01026P
–Installation
–Wiring
– Local operation
– Commissioning
– Description of Quick Setup menus
Fold-out brochure KA00252P – Wiring
– Operation without display
– Description of Quick Setup menus
–HistoROM
®/M-DAT operation

Overview of documentation Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
4Endress+Hauser

Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus Table of contents
Endress+Hauser 5
Table of contents
1 Notes on use . . . . . . . . . . . . . . . . . . . . 6
1.1 Finding parameter descriptions using ID numbers . . 6
1.2 Finding function groups using graphic representation 6
1.3 Finding parameter descriptions using parameter names
(index) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Parameter description of local operation
and FieldCare . . . . . . . . . . . . . . . . . . . . 7
3 Graphic representation of function groups
11
3.1 Representation via device display . . . . . . . . . . . . . . 11
3.2 Representation in FieldCare . . . . . . . . . . . . . . . . . . 12
4 Pressure measurement
(FF configuration program). . . . . . . . . 13
5 Level measurement (FF configuration
program) . . . . . . . . . . . . . . . . . . . . . . 14
5.1 Overview of level measurement . . . . . . . . . . . . . . . 14
5.2 "Level easy pressure" level selection . . . . . . . . . . . . 15
5.3 "Level easy height" level selection . . . . . . . . . . . . . 19
5.4 "Level standard" level selection, "Linear" level mode .
23
5.5 "Level standard" level selection,
"Pressure linearized" level mode . . . . . . . . . . . . . . 27
5.6 "Height linearized" level mode . . . . . . . . . . . . . . . . 31
6 Flow measurement
(FF configuration program). . . . . . . . . 34
6.1 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6.2 Totalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
7 Parameter description
(FF configuration program). . . . . . . . . 38
7.1 Cerabar S/Deltabar S/Deltapilot S block model . . . 38
7.2 Resource Block . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
7.3 Transducer Blocks . . . . . . . . . . . . . . . . . . . . . . . . . 51
7.4 Analog Input Block (function block) . . . . . . . . . . . 93
8 Pressure measurement (via local
operation and FieldCare) . . . . . . . . . 104
9 Level measurement (via local operation
and FieldCare) . . . . . . . . . . . . . . . . . 105
9.1 Overview of level measurement . . . . . . . . . . . . . . 105
9.2 "Level easy pressure" level selection . . . . . . . . . . . 106
9.3 "Level easy height" level selection . . . . . . . . . . . . 110
9.4 "Level standard" level selection, "Linear" level mode . .
114
9.5 "Level standard" level selection,
"Pressure linearized" level mode . . . . . . . . . . . . . . 118
9.6 "Height linearized" level mode . . . . . . . . . . . . . . . 124
10 Flow measurement (via local operation
and FieldCare). . . . . . . . . . . . . . . . . . 129
10.1 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
10.2 Totalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
11 Parameter description (Local operation
and FieldCare). . . . . . . . . . . . . . . . . . 133
12 Troubleshooting . . . . . . . . . . . . . . . . 209
12.1 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
12.2 Response of outputs to errors . . . . . . . . . . . . . . . . 219
12.3 Confirming messages . . . . . . . . . . . . . . . . . . . . . . 220
13 Appendix. . . . . . . . . . . . . . . . . . . . . . 221
13.1 Operating menu . . . . . . . . . . . . . . . . . . . . . . . . . 221
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

Notes on use Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
6Endress+Hauser
1 Notes on use
Sections 4 to 6 describe how to operate the unit using an FF configuration program.
With FOUNDATION Fieldbus, all the device parameters are categorized according to their
functional properties and task and are assigned to the Resource Block, the Transducer Blocks and
the function blocks. The parameters of the Resource Block, the Transducer Blocks and the Analog
Input Block are described in Section 7. For a description of the parameters of the other function
blocks, such as the PID or Discret Ouput Block, see Operating Instructions BA00013S
"FOUNDATION Fieldbus Overview" or the FOUNDATION Fieldbus Specification.
Sections 8 to 10 describe how to operate the unit via the local operation and the Endress+Hauser
operating program FieldCare.
Section 11 describes all the parameters in the order of how they appear in the menu.
Sections 1.1 and 1.2 describe ways of finding a certain parameter description more easily.
1.1 Finding parameter descriptions using ID numbers
Each parameter is indicated on the local operation with a unique identification number (ID). All the
parameters are listed in numerical order in Section 2. The page reference/link takes you to the
parameter in question.
In FieldCare, additional parameters and, to an extent, other parameters are displayed. These
parameters are not listed in Section 2. You can find these parameters by means of the index.
→See also Section 1.3.
1.2 Finding function groups using graphic representation
All the function groups are shown in table form in Section 3. The page reference/link takes you to
the function group in question. In Section 7, all the parameters of a function group are compiled in
a table.
1.3 Finding parameter descriptions using parameter names
(index)
The index lists all the parameters in alphabetical order. The page reference/link takes you to the
parameter in question.

Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus Parameter description of local operation and FieldCare
Endress+Hauser 7
2 Parameter description of local operation and
FieldCare
You can find the parameter description as follows:
• Via the ID number for the local operation
• Via the parameter name for FieldCare
ID number Parameter name Description, see page
001 DENSITY UNIT 152 or 184
003 HEIGHT UNIT 152
004 FULL CALIB. – QUICK SETUP 140
004 FULL CALIB. – "Level easy pressure" level selection 149
004 FULL CALIB. – "Level easy height" level selection 153
005 FULL PRESSURE 149
006 FULL HEIGHT 154
007 ADJUST DENSITY 152 or 184
008 CALIBRATION MODE – "Level easy pressure" level selection 148
008 CALIBRATION MODE – "Level easy height" level selection 152
009 EMPTY HEIGHT 153
010 EMPTY CALIB. – QUICK SETUP 139
010 EMPTY CALIB. – "Level easy pressure" level selection 148 or 149
010 EMPTY CALIB. – "Level easy height" level selection 153
011 EMPTY PRESSURE 149
014 DOWNLOAD SELECT 205
020 LEVEL SELECTION 135
023 OUTPUT UNIT – "Level easy pressure" level selection 148
023 OUTPUT UNIT – "Level easy height" level selection 152
025 PROCESS DENSITY 184
046 ALARM STATUS 207
047 ENTER RESET CODE 205
048 INSERT PIN NO 205
050 LEVEL BEFORE LIN 202
060 PRESS. ENG. UNIT 144, 147, 151, 155 or 179
075 CUSTOMER UNIT P 144, 147, 151, 156 or 179
079 LANGUAGE 133
247 DAMPING VALUE 137, 140, 141, 145, 149, 154, 165,
168, 177 or 182
250 SENSOR SER. No. 198
264 SOFTWARE VERSION 196
266 HARDWARE REV. 196
301 PRESSURE – "Pressure" measuring mode 201
PRESSURE – "Level" measuring mode 201
PRESSURE – "Flow" measuring mode 202
311 MAX. FLOW 141 or 182
313 UNIT VOLUME – "Linear" level mode 159 or 162
UNIT VOLUME – "Pressure linearized" level mode 166
UNIT VOLUME – "Height linearized" level mode 171
314 EMPTY CALIB. – QUICK SETUP 139
EMPTY CALIB. – "Linear" level mode 161
EMPTY CALIB. – "Height linearized" level mode 174
315 FULL CALIB. – QUICK SETUP 140
FULL CALIB. – "Pressure linearized" level mode 161
FULL CALIB. – "Height linearized" level mode 174
316 ADJUST DENSITY – "Linear" level mode 162
ADJUST DENSITY – "Height linearized" level mode 175
ADJUST DENSITY– "Level" extended setup 184
317 CUST. UNIT. FACT. P 145, 147, 151, 156 or 180
318 TEMP. ENG. UNIT – "Pressure" measuring mode 183
TEMP. ENG. UNIT – "Level" measuring mode 184
TEMP. ENG. UNIT – "Flow" measuring mode 185
319 CALIB. OFFSET 143
323 SET. L. FL. CUT-OFF 185
329 FACT. U.U. TOTAL.1 193
330 FACT. U.U. TOTAL.2 194
331 RESET TOTALIZER 1 193
332 Pmin ALARM WINDOW 208
333 Pmax ALARM WINDOW 208

Parameter description of local operation and FieldCare Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
8Endress+Hauser
334 Tmin ALARM WINDOW 209
335 Tmax ALARM WINDOW 209
336 ALARM DELAY 208
339 DISPLAY CONTRAST 195
350 DEVICE DESIGN. 196
352 CONFIG RECORDER 197
354 DEVICE SERIAL No. 196
357 PCB TEMPERATURE 197
358 Allowed Min. TEMP 197
359 Allowed Max. TEMP 197
360 MAT. PROC. CONN. + 198
361 MAT. PROC. CONN. - 198
362 SEAL TYPE 198
363 DIP STATUS 197
365 MAT. MEMBRANE 199
366 FILLING FLUID 199
367 SENSOR TEMP. 201 or 202
368 Tmin SENSOR 199
369 Tmax SENSOR 199
370 TANK CONTENT 202
375 SUPPRESSED FLOW 202
378 MEAS. VAL. TREND 201 or 202
380 COUNTER: P > Pmax 203
382 RESET PEAKHOLD 204
383 MAX. MEAS. PRESS. 203
386 ELECTR. SERIAL NO. 196
389 MEASURING MODE 134
392 CALIBRATION MODE – "Linear" level mode 161
CALIBRATION MODE – "Height linearized" level mode 174
397 LIN. EDIT MODE 187
398 TOTALIZER 1 UNIT – "Volume operat. cond." flow type 192
399 TOTALIZER 2 UNIT – "Volume operat. cond." flow type 193
400 NEG. FLOW TOT. 1 193
401 ACK. ALARM MODE 207
404 COUNTER: T > Tmax 203
409 OPERATING HOURS 205
413 SIMULATION MODE 206
414 SIM. PRESSURE 206
416 NEG. FLOW TOT. 2 194
419 MAIN LINE CONT. 194
423 ALTERNATE DATA 195
434 CORRECTED PRESS. – "Pressure" measuring mode 201
CORRECTED PRESS. – "Level" measuring mode 201
CORRECTED PRESS. – "Flow" measuring mode 202
442 LOW FLOW CUT-OFF 185
467 COUNTER: P < Pmin 203
469 MIN. MEAS. PRESS. 203
471 MAX. MEAS. TEMP. 203
472 COUNTER: T < Tmin 203
474 MIN. MEAS. TEMP. 203
476 SIM. ERROR NO. 206
480 ALARM DISPL. TIME 208
482 PROC. CONN. TYPE 197
484 PRESS.SENS LOLIM 198
485 PRESS.SENS HILIM 198
487 SENSOR H/WARE REV. 199
488 PCB COUNT: T>Tmax 203
490 PCB MAX. TEMP. 203
492 PCB COUNT: T < Tmin 203
494 PCB MIN. TEMP. 204
500 ACK. ALARM 207
549 MEASURING TABLE (display) 188
549 EDITOR TABLE, LINE-NUMB (enter values) 187
550 EDITOR TABLE, X-VAL. (enter values) 188
551 EDITOR TABLE, Y-VAL. (enter values) 187, 188
563 POS. INPUT VALUE 137, 139 or 143
564 LAST DIAG. CODE 207
570 Pmax PROC. CONN. 197
ID number Parameter name Description, see page

Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus Parameter description of local operation and FieldCare
Endress+Hauser 9
571 MASS FLOW UNIT 181
581 SENSOR MEAS. TYPE 199
584 SENSOR PRESSURE – "Pressure" measuring mode 201
SENSOR PRESSURE – "Level" measuring mode 201
SENSOR PRESSURE – "Flow" measuring mode 202
591 MINIMUM SPAN 198
595 SELECT ALARMTYPE 208
600 SELECT ALARMTYPE 208
603 RESET ALL ALARMS 207
607 CUST. UNIT FACT. V – "Linear" level mode 160 or 163
CUST. UNIT FACT. V – "Pressure linearized" level mode 167
CUST. UNIT FACT. V – "Height linearized" level mode 172
608 CUSTOMER UNIT V – "Linear" level mode 159 or 163
CUSTOMER UNIT V – "Pressure linearized" level mode 167
CUSTOMER UNIT V – "Height linearized" level mode 172
609 CUST. UNIT. FACT. F 182
610 CUSTOMER UNIT F 182
627 TOT. 1 USER UNIT 193
628 TOT. 2 UNIT TEXT 194
634 MAX PRESS. FLOW 141 or 182
639 SIM. FLOW VALUE 206
640 FLOW-MEAS. TYPE 180
652 TOTALIZER 1 202
655 TOTAL. 1 OVERFLOW 202
657 TOTALIZER 2 202
658 TOTAL. 2 OVERFLOW 203
660 STD. FLOW UNIT 181
661 NORM FLOW UNIT 181
662 TOTALIZER 1 UNIT – "Mass" flow type 192
663 TOTALIZER 2 UNIT – "Mass" flow type 193
664 TOTALIZER 1 UNIT – "Gas. std. conditions" flow type 192
665 TOTALIZER 2 UNIT – "Gas. std. conditions" flow type 193
666 TOTALIZER 1 UNIT – "Gas. norm conditions" flow type 192
667 TOTALIZER 2 UNIT – "Gas. norm conditions" flow type 193
679 MEASURED VALUE – "Pressure" 200
MEASURED VALUE – "Level" 201
MEASURED VALUE – "Flow" 202
685 POS. ZERO ADJUST 137, 139, 141 or 142
688 MAIN DATA FORMAT 195
703 CUST. UNIT FACT. M – "Linear" level mode 160
CUST. UNIT FACT. M – "Pressure linearized" level mode 168
CUST. UNIT FACT. M – "Height linearized" level mode 173
704 CUSTOMER UNIT M – "Linear" level mode 160
CUSTOMER UNIT M – "Pressure linearized" level mode 168
CUSTOMER UNIT M – "Height linearized" level mode 173
705 CUST. UNIT FACT. H – "Linear" level mode 159 or 164
CUST. UNIT FACT. H – "Height linearized" level mode 171 or 176
706 CUSTOMER UNIT H – "Linear" level mode 158 or 163
CUSTOMER UNIT H – "Height linearized" level mode 171 or 176
708 HEIGHT UNIT – "Linear" level mode 158 or 163
HEIGHT UNIT – "Height linearized" level mode 170 or 175
709 MASS UNIT – "Linear" level mode 160
MASS UNIT – "Pressure linearized" level mode 167
MASS UNIT – "Height linearized" level mode 172
710 EMPTY PRESSURE – "Linear" level mode 161
EMPTY PRESSURE – "Height linearized" level mode 174
711 FULL PRESSURE – "Linear" level mode 161
FULL PRESSURE – "Height linearized" level mode 174
712 LEVEL MAX. 173
713 TANK CONTENT MAX. 186
714 SIM. LEVEL 206
715 SIM. TANK CONT. 206
717 MEASURING TABLE (selection) 188
718 LEVEL MODE 156
755 LEVEL MIN. 173
759 TANK CONTENT MIN. 186
761 HYDR. PRESS MAX. 168
770 EDITOR TABLE (continue entries) 188
ID number Parameter name Description, see page

Parameter description of local operation and FieldCare Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
10 Endress+Hauser
775 HYDR. PRESS MIN. 168
804 LIN. MEASURAND 158
805 LINd. MEASURAND 166
806 COMB.MEASURAND 170
808 TABLE SELECTION 186
809 EDITOR TABLE (select table) 187
810 ADJUST DENSITY – "Linear" level mode 161
ADJUST DENSITY – "Height linearized" level mode 174
811 PROCESS DENSITY 184
812 DENSITY UNIT – "Linear" level mode 162
DENSITY UNIT – "Height linearized" level mode 175
813 100 % POINT – "Linear" level mode 164
100 % POINT – "Height linearized" level mode 176
814 ZERO POSITION – "Linear" level mode 164
ZERO POSITION – "Height linearized" level mode 177
815 TANK DESCRIPTION 188
831 HistoROM AVAIL. 205
832 HistoROM CONTROL 205
858 TANK VOLUME 163
859 TANK HEIGHT 164
981 AI 3 OUT Value 203
982 AI 2 OUT Value 203
983 AI 1 OUT Value 203
984 DEVICE ADDRESS 199
985 DD REVISION 199
986 DEVICE REVISION 199
987 DEVICE ID 199
ID number Parameter name Description, see page