Endress+Hauser Prosonic S FMU90 User manual

BA00293F/00/EN/13.12
71164421
Valid as of software version
V02.01.00
Operating Instructions
Prosonic S FMU90
Flow Measurement
Backwater and Dirt Detection
Totalizers and Counters

Prosonic S FMU90 - flow measurement - PROFIBUS DP Table of Contents
Endress+Hauser 3
Table of Contents
1 Safety Instructions . . . . . . . . . . . . . . . . 5
1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Installation, commissioning, operation . . . . . . . . . . . 5
1.3 Operational safety and process safety . . . . . . . . . . . . 5
1.4 Notes on safety conventions and symbols . . . . . . . . . 6
2 Identification . . . . . . . . . . . . . . . . . . . . 7
2.1 Parts of the Prosonic S FMU90 . . . . . . . . . . . . . . . . 7
2.2 Nameplate (Example) . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Product structure . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5 Certificates of approvals . . . . . . . . . . . . . . . . . . . . . 10
2.6 Registered trademarks . . . . . . . . . . . . . . . . . . . . . . 10
3 Installation . . . . . . . . . . . . . . . . . . . . . 11
3.1 Incoming acceptance, transport, storage . . . . . . . . . 11
3.2 Mounting the field housing . . . . . . . . . . . . . . . . . . 11
3.3 Mounting the DIN-rail housing . . . . . . . . . . . . . . . 13
3.4 Mounting the remote display and operating module 16
3.5 Mounting of the sensors . . . . . . . . . . . . . . . . . . . . 17
3.6 Installation check . . . . . . . . . . . . . . . . . . . . . . . . . 17
4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . 18
4.1 Terminal compartment . . . . . . . . . . . . . . . . . . . . . 18
4.2 Terminal assignment . . . . . . . . . . . . . . . . . . . . . . . 20
4.3 Connection to a PROFIBUS DP network . . . . . . . . 23
4.4 Sensor connection . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.5 Connection of the sensor heater
(for FDU90/FDU91) . . . . . . . . . . . . . . . . . . . . . . . 26
4.6 Connection of external switches
(for FMU90-********B***) . . . . . . . . . . . . . . . . 28
4.7 Connection of a temperature sensor . . . . . . . . . . . . 28
4.8 Shortening the sensor cable . . . . . . . . . . . . . . . . . . 30
4.9 Synchronization line. . . . . . . . . . . . . . . . . . . . . . . 31
4.10 Connection of the separate display and operating
module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.11 Potential equalization . . . . . . . . . . . . . . . . . . . . . . 33
4.12 Post-connection check . . . . . . . . . . . . . . . . . . . . . . 34
5 Operation . . . . . . . . . . . . . . . . . . . . . . 35
5.1 Operating options . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.2 Operation via the display and operating module . . . 37
5.3 Operation via Endress+Hauser operating tool
"FieldCare" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6 Commissioning. . . . . . . . . . . . . . . . . . 50
6.1 Preparatory steps . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.2 Configuration of the measurement . . . . . . . . . . . . . 55
6.3 Calibration of backwater and dirt detection . . . . . . 67
6.4 Calibration for simultaneous level and flow
measurement with one sensor . . . . . . . . . . . . . . . . 71
6.5 Parametrization of the counters . . . . . . . . . . . . . . . 72
6.6 Configuration of a limit relay . . . . . . . . . . . . . . . . . 76
6.7 Configuration of an alarm or diagnostic relay . . . . . 81
6.8 Configuration of a time pulse relay . . . . . . . . . . . . . 84
6.9 Configuration of a counting pulse relay . . . . . . . . . . 86
6.10 Configuration of a Fieldbus Relay . . . . . . . . . . . . . . 91
6.11 Parametrization of the Analog Input (AI) and Digital
Input (DI) blocks . . . . . . . . . . . . . . . . . . . . . . . . . . 92
6.12 Parametrization of the cyclic data telegram . . . . . . . 94
6.13 Parametrization of the on-site display . . . . . . . . . . . 99
7 Troubleshooting . . . . . . . . . . . . . . . . 102
7.1 System error messages . . . . . . . . . . . . . . . . . . . . . 102
7.2 Possible calibration errors . . . . . . . . . . . . . . . . . . . 109
7.3 Envelope curve display . . . . . . . . . . . . . . . . . . . . . 110
7.4 Software history . . . . . . . . . . . . . . . . . . . . . . . . . . 113
8 Maintenance . . . . . . . . . . . . . . . . . . . 114
8.1 Exterior cleaning . . . . . . . . . . . . . . . . . . . . . . . . . 114
8.2 Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
8.3 Repairs to Ex-approved devices . . . . . . . . . . . . . . 114
8.4 Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
8.5 Replacing a sensor . . . . . . . . . . . . . . . . . . . . . . . . 114
8.6 Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
8.7 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
8.8 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
8.9 Contact addresses of Endress+Hauser . . . . . . . . . . 116
9 Accessories . . . . . . . . . . . . . . . . . . . . 117
9.1 Commubox FXA291 . . . . . . . . . . . . . . . . . . . . . . 117
9.2 Protection cover for the field housing . . . . . . . . . . 117
9.3 Mounting plate for the field housing . . . . . . . . . . . 117
9.4 Mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . 118
9.5 Adaption plate for remote display . . . . . . . . . . . . . 119
9.6 Overvoltage protection (in IP66 housing) . . . . . . . 119
9.7 Overvoltage protection HAW562 . . . . . . . . . . . . . 120
9.8 Extension cable for sensors . . . . . . . . . . . . . . . . . 121
9.9 Temperature sensor FMT131 . . . . . . . . . . . . . . . . 122
10 Technical Data. . . . . . . . . . . . . . . . . . 123
10.1 Technical data at a glance . . . . . . . . . . . . . . . . . . 123
11 Operating menu. . . . . . . . . . . . . . . . . 128
11.1 "flow" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
11.2 "Safety settings" . . . . . . . . . . . . . . . . . . . . . . . . . . 130
11.3 "relay/controls" . . . . . . . . . . . . . . . . . . . . . . . . . . 132
11.4 "Output/calculations" . . . . . . . . . . . . . . . . . . . . . 134
11.5 "Device properties" . . . . . . . . . . . . . . . . . . . . . . . 135
11.6 "System information" . . . . . . . . . . . . . . . . . . . . . . 136
11.7 "Display" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
11.8 "Sensor management" . . . . . . . . . . . . . . . . . . . . . 138

Prosonic S FMU90 - flow measurement - PROFIBUS DP Table of Contents
4Endress+Hauser
12 Appendix. . . . . . . . . . . . . . . . . . . . . . 139
12.1 Pre-programmed flow curves . . . . . . . . . . . . . . . . 139
12.2 The formula for flow calculation . . . . . . . . . . . . . 153
12.3 Default block configuration . . . . . . . . . . . . . . . . . 157
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

Prosonic S FMU90 - flow measurement - PROFIBUS DP Safety Instructions
Endress+Hauser 5
1SafetyInstructions
1.1 Designated use
The Prosonic S FMU90 is a transmitter for the ultrasonic sensors FDU90, FDU91, FDU91F, FDU92,
FDU93, FDU95 and FDU96. The sensors of the former class FDU8x can be connected as well.
The transmitter version for level measurements (ä9, "Product structure":
FMU90 - *1**********) can be applied for different measuring tasks, e.g.:
• level measurement in tanks and silos
• conveyor belt measurement
• level limit detection
• (alternating) pump control, screen and rake control
The version for level and flow measurements (ä9, "Product structure":
FMU90 - *2**********) is usable for further measuring tasks, e.g.:
• flow measurement at open flumes and weirs
• (non-resettable) totalizers and (resettable) counters
• control of samplers by time or counting pulses
• backwater and dirt detection in flumes
• simultaneous measurement of level and flow in a stormwater overflow basin with only one sensor
1.2 Installation, commissioning, operation
The Prosonic S FMU90 is fail-safe and constructed to the state-of-the-art. It meets the appropriate
standards and EC directives. However, if you use it improperly or other than for its designated use,
it may pose application-specific hazards, e.g. product overflow due to incorrect installation or
configuration. Installation, electrical connection, start-up, operation and maintenance of the
measuring device must therefore be carried out exclusively by trained specialists authorised by the
system operator. Technical personnel must have read and understood these operating instructions
and must adhere to them. You may only undertake modifications or repair work to the device when
it is expressly permitted by the operating instructions.
1.3 Operational safety and process safety
Alternative monitoring measures must be taken to ensure operational safety and process safety
during configuration, testing and maintenance work on the device.
Hazardous areas
Measuring systems for use in hazardous environments are accompanied by separate "Ex
documentation", which is an integral part of this Operating Manual. Strict compliance with the
installation instructions and ratings as stated in this Additional documentation is mandatory.
• Ensure that all personnel are suitably qualified.
• Observe the specifications in the certificate as well as national and local regulations.
The transmitter may only be installed in suitable areas. Sensors with a certificate for hazardous areas
may be connected to a transmitter without a certificate.
#Warning!
The sensors FDU83, FDU84, FDU85 and FDU86 with an ATEX, FM or CSA certificate are not
certified for connection to the FMU90 transmitter.
For installations in the USA:
Installation should be in accordance with the National Electrical Code NFPA 70 (NEC)
For installations in Canada:
Installation should be in accordance with the Canadian Electrical Code (CEC)

Safety Instructions Prosonic S FMU90 - flow measurement - PROFIBUS DP
6Endress+Hauser
1.4 Notes on safety conventions and symbols
In order to highlight safety-relevant or alternative operating procedures in the manual, the following
conventions have been used, each indicated by a corresponding symbol in the margin.
Safety conventions
#Warning!
A warning highlights actions or procedures which, if not performed correctly, will lead to personal
injury, a safety hazard or destruction of the instrument
"Caution!
Caution highlights actions or procedures which, if not performed correctly, may lead to personal
injury or incorrect functioning of the instrument
!Note!
A note highlights actions or procedures which, if not performed correctly, may indirectly affect
operation or may lead to an instrument response which is not planned
Explosion protection
0Device certified for use in explosion hazardous area
If the device has this symbol embossed on its name plate it can be installed in an explosion hazardous
area.
-Explosion hazardous area
Symbol used in drawings to indicate explosion hazardous areas. Devices located in and wiring
entering areas with the designation “explosion hazardous areas” must conform with the stated type
of protection.
.Safe area (non-explosion hazardous area)
Symbol used in drawings to indicate, if necessary, non-explosion hazardous areas. Devices located in
safe areas still require a certificate if their outputs run into explosion hazardous areas
Electrical symbols
%Direct voltage
A terminal to which or from which a direct current or voltage may be applied or supplied
&Alternating voltage
A terminal to which or from which an alternating (sine-wave) current or voltage may be applied or
supplied
)Grounded terminal
A grounded terminal, which as far as the operator is concerned, is already grounded by means of an
earth grounding system
*Protective grounding (earth) terminal
A terminal which must be connected to earth ground prior to making any other connection to the
equipment
+Equipotential connection (earth bonding)
A connection made to the plant grounding system which may be of type e.g. neutral star or
equipotential line according to national or company practice
Temperature resistance of the connection cables
States, that the connection cables must be resistant to a temperature of at least 85 °C (185 °F).
t >85°C

Prosonic S FMU90 - flow measurement - PROFIBUS DP Identification
Endress+Hauser 7
2 Identification
2.1 Parts of the Prosonic S FMU90
2.1.1 FMU90 in the field housing
L00-FMU90xxx-03-00-00-xx-001
1 Terminals 6 Display and operating module
2 Instrument designation and identification 7 Prestamped openings for cable entries
3 Mounting help 8 Grounding terminals
4 Nameplate 9 Display cable
5 Cover of the terminal compartment 10 Short instructions
2.1.2 FMU90 in the DIN-rail housing
L00-FMU90xxx-03-00-00-xx-002
1 Display and operating module 5 Display cable
2 Cover of the terminal compartment 6 Terminals
3 Nameplate 7 Instrument designation and identification
4 Short instructions
!Note!
The picture shows the smallest possible version of the DIN-rail housing. Depending on the version
of the Prosonic S, the width of the housing may be larger.
Madein Germany
D-79689Maulburg
Madein Germany
D-79689Maulburg
ProsonicS
ProsonicS
Ta>60°C:
Ta>60°C :
II3DT=xxx°C
II3D T=xxx°C IP66/NEMA4X
IP66/NEMA4X
XAxxxF-A
XAxxxF-A
Dat./Insp.:
Dat./Insp.:
ifm
odification
seesep.label
ifmodification
seesep. label
X= X=
10,5…3
2VDC10W
10,5… 32 VDC 10W
4…2
0mAHART4…20mAHART
OrderCode:
Ser.-No.:5A01090109A
FMU90-J11AB111AA1A
OrderCode:
Ser.-No.: 5A01090109A
FMU90-J11AB111AA1A
MadeinGermany
D-79689Maulburg
Madein Germany
D-79689Maulburg
ProsonicS
ProsonicS
OrderCode:
Ser.-No.:5A01090109A
FMU90-J11AB111AA1A
OrderCode:
Ser.-No.: 5A01090109A
FMU90-J11AB111AA1A
4
3
9
2
5
10
8
1
76
MadeinGermany
D-79689Maulburg
Prosonic S
Ta >60°C:
II 3DT=xxx°CIP66/NEMA4X
XAxxxF-A
Dat./Insp.:
if modification
seesep. label
X=
10,5…3
2VDC10W
4…2
0mAHART
OrderCode:
Ser.-No.: 5A01090109A
FMU90-J11AB111AA1A
Made in Germany
D-79689 Maulburg
Prosonic S
Ta >60°C:
II3DT=xxx°C IP66/NEMA4X
XAxxxF-A
Dat./Insp.:
ifmodification
seesep.label
X=
10,5 …32VDC10W
4…2
0mAHART
Order Code:
Ser.-No.: 5A01090109A
FMU90-J11AB111AA1A
1237
45 6

Identification Prosonic S FMU90 - flow measurement - PROFIBUS DP
8Endress+Hauser
2.1.3 FMU90 with remote display and operating module for cabinet
door and switchboard mounting (96 x 96 mm (3.78 x 3.78 in))
L00-FMU90xxx-03-00-00-xx-040
1 DIN-rail housing without display
2 Remote display and operating module for cabinet mounting
3 The cable (3 m (9.8 ft)) is supplied
!Note!
The picture shows the smallest possible version of the DIN-rail housing. Depending on the version
of the Prosonic S, the width of the housing may be larger.
2.2 Nameplate (Example)
L00-FMU90xxx-18-00-00-xx-002
1 Specification of the electrical protection class (protective insulation)
2 Ingress protection
3Barcode
4 Marked if a modification nameplate is present
5 Reference to additional safety-relevant documentation
6 Certificate-related data
7 Specification of required temperature resistance of the connection cables
8Outputsignal
9 Power supply
10 Serial number
11 Order code (as defined by the product structure)
Made in Germany
D-79689 Maulburg
Prosonic S
Ta >60°C:
II3DT=xxx°C IP66/N
EMA4X
XAxxxF-A
Dat./Insp.:
ifmodification
seesep.label
X=
10,5 …32VDC 10W
4…20mAHART
Order Code:
Ser.-No.: 5A01090109A
FMU90-J11AB111AA1A
12
3
Made in Germany
D-79689 Maulburg
Prosonic S
10,5 … 32 V DC 14W
Profibus DP
Order Code:
Ser.-No.: 5A01090109A
FMU90-J11CB113AA1A
IP66 / NEMA4X
XAxxxF-A
if modification
see sep. label
X=
Ta > 60°C :
II 3 D Ex tD A22 T=90°C X
Do not open when energized
11
9
8
7
6
5
4
1
2
3
10

Prosonic S FMU90 - flow measurement - PROFIBUS DP Identification
Endress+Hauser 9
2.3 Product structure
(*): meaning of the language code:
cs: Czech; de: German; en: English; es: Spanish; fr: French; id: Bahasa (Indonesia, Malaysia); it:
Italian; ja: Japanese; ko: korean; nl: Dutch; pl: Polish; pt: Portuguese; ru: Russian; th: Thai; zh:
Chinese
10 Approval
R Non-hazarous area
JATEXII3D
N CSA General Purpose
20 Application
1 Level + pump control, alternating
2 Flow + totalizer + level + sample control + preprogrammed OCM flow curves
3 Level + additional pump control
4 Universal instrument (Level + Flow + Additional pump control)
30 Housing, material
1 Field mounting PC, IP66 NEMA 4x
2 DIN rail mounting PBT, IP20
40 Operation
C Illuminated display + keypad
E Illuminated display + keypad, 96x96, panel mounting, front IP65
K w/o display, via communication
50 Power supply
A 90-253 VAC
B 10,5-32 VDC
60 Level input
1 1x sensor FDU9x/8x
2 2x sensor FDU9x/8x
70 Switch output
11xrelay,SPDT
33xrelay,SPDT
66xrelay,SPDT
80 Output
1 1x 0/4-20mA HART
2 2x 0/4-20mA HART
3 PROFIBUS DP
90 Additional input
A w/o additional input
B 4x limit switch + 1x temperature PT100/FMT131
100 Datalog function
A Basic version
110 Languages
1 de, en, nl, fr, es, it, pt
2 de, en, ru, pl, cs
3 en, zh, ja, ko, th, id
120 Additional option
A Basic version
L 5-point linearity protocol only to order with FDU9x sensor
+ 5-point linearity protocol
995 Marking
1Tagging(TAG)
2 Bus address
FMU90 - complete product designation

Identification Prosonic S FMU90 - flow measurement - PROFIBUS DP
10 Endress+Hauser
2.4 Scope of delivery
• Instrument according to the version ordered
• Endress+Hauser operating program on the enclosed CD-ROM
• For FMU90-***E********:
remote display and operating module; retainers; connection cable (3 m (9.8 ft))
• For FMU90-*21********* FMU and for FMU90-*41*********:
2 slotted capstan screws (can be used to seal the housing)
• Accessories ä117
• Approval documentation: if this is not included in the operating manual (Refer to the nameplate
for the names of the safety instructions that apply to your device version.)
• CD-ROM with further documentation, e.g.
– Technical Information
– Operating Instructions
– Description of Instrument Functions
– Slot/Index tables
• Brief operating instructions for quick commissioning, see the following table:
2.5 Certificates of approvals
CE mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with the
statutory requirements of the EC directives. Endress+Hauser confirms the successful testing of the
device by affixing to it the CE mark.
2.6 Registered trademarks
PROFIBUS®
Registered trademark of the PROFIBUS Trade Organisation, Karlsruhe, Germany
ToF®
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
FieldCare®
Trademark of Endress+Hauser Process Solutions AG
Brief operating instructions Output Application Instrument version
KA01065F
HART
• level measurement
• alternating pump control
• screen and rake control
FMU90 - *******1****
FMU90 - *******2****
KA01066F
• flow measurement
• backwater and dirt detection
• totalizers and counters
FMU90 - *2*****1****
FMU90 - *4*****1****
FMU90 - *2*****2****
FMU90 - *4*****2****
KA01067F
PROFIBUS DP
• level measurement
• alternating pump control
• screen and rake control
FMU90 - *******3****
KA01068F
• flow measurement
• backwater and dirt detection
• totalizers and counters
FMU90 - *2*****3****
FMU90 - *4*****3****

Prosonic S FMU90 - flow measurement - PROFIBUS DP Installation
Endress+Hauser 11
3 Installation
3.1 Incoming acceptance, transport, storage
3.1.1 Incoming acceptance
Check the packing and contents for any signs of damage.
Check the shipment, make sure nothing is missing and that the scope of supply matches your order.
3.1.2 Transport, storage
Pack the measuring instrument so that it is protected against impacts for storage and transport. The
original packing material provides the optimum protection for this.
Permissible storage temperature: -40 to +60 °C (-40 to +140 °F)
3.2 Mounting the field housing
3.2.1 Dimensions of the field housing
L00-FMU90xxx-06-00-00-xx-001
Dimensions in mm (in)
AMounting help (supplied); can also be used as drilling template
BField housing
CMinimum mounting distance
The dimensions of the field housing are the same for all instrument versions.
To open the housing, a minimum mounting distance of 55 mm (2.17 in) is required on the left.
215 (8.46)
180 (7.09)
150 (5.91)
15 (0.59)
170 (6.69)
190 (7.48)
80
(3.15)
100
(3.94)
ø6.5 (0.26)
10 (0.39)
AB
»1,6 kg (3.53 lbs)
153 (6.02)
C
³55 (2.17)
³55 (2.17)

Installation Prosonic S FMU90 - flow measurement - PROFIBUS DP
12 Endress+Hauser
3.2.2 Installation conditions
Weather protection
In order to avoid excessive sunlight exposure, the instrument should be mounted in a position
which is protected against direct sunlight or a protection cover should be applied (ä117,
"Accessories").
Overvoltage protection
In order to protect the Prosonic against overvoltages (especially if mounted outdoors), connection
of an overvoltage protection is recommended (ä117, "Accessories").
Wall mounting
A mounting help for wall mounting is supplied. It also serves as drilling template. The mounting
help should be mounted on a flat surface and may not become distorted.
Pipe mounting
A mounting plate is available for mounting of the field housing to 1" to 2" pipes (ä117,
"Accessories").
3.2.3 Installation
L00-FMU90xxx-17-00-00-xx-003
1 Wall mounting with mounting help
1. 2. 3.
4.
1

Prosonic S FMU90 - flow measurement - PROFIBUS DP Installation
Endress+Hauser 13
3.3 Mounting the DIN-rail housing
3.3.1 Dimensions of the DIN-rail housing
The dimensions of the DIN-rail housing depend on the instrument version. The version determines,
which terminal areas the Prosonic S contains. The dimensions are influenced by the following
features of the product structure (ä9):
• 60: Level Input
•70:SwitchOutput
• 80: Output
In order to determine the dimensions of a specific version, perform the following steps (see the
example on ä14):
1. Using the product structure, determine the options of the features 60, 70 and 80 of the
instrument version in question.
2. Using the following table, determine how many optional terminal areas this instrument version
contains.
3. The appropriate dimensions are given in the following diagram:
10 20 30 40 50 60 70 80 90 100 110 120
FMU90 -
Feature and option of
the product structure
corresponds to the following
terminal area
present?
yes = 1
no = 0
feature 60; option 2
and/or
feature 80, option 2
2 sensor inputs
and/or
2 analogue outputs
feature 70, option 3 or 6 3 o 6 relays
feature 80, option 3 PROFIBUS DP interface
feature 90, option B inputs for external switches and
external temperature sensor
Sum =
Sum = 0
(only basic terminal area)
L00-FMU90xxx-06-00-00-xx-002
Dimensions in mm (in)
Sum = 1, 2 or 3
(1-3 optional terminal areas)
L00-FMU90xxx-06-00-00-xx-005
Dimensions in mm (in)
92 (3.62)
104 (4.09)
140 (5.51)
43 (1.69)
EN 60715
TH 35x7.5/15
(1.4x0.3/0.6)
35 (1.38)
0,5 kg (1.10 lbs)»
150 (5.91)
104 (4.09)
140 (5.51)
EN 60715
TH 35x7.5/15
(1.4x0.3/0.6)
35 (1.38)
»0,7 kg (1.54 lbs)
42 (1.65)

Installation Prosonic S FMU90 - flow measurement - PROFIBUS DP
14 Endress+Hauser
Example
Sum = 2
=> 104 x 150 x 140 mm (4.09 x 5.91 x 5.51 in)
Sum = 4
(4 optional terminal areas)
L00-FMU90xxx-06-00-00-xx-009
Dimensions in mm (in)
210 (8.27)
140 (5.51)
EN 60715
TH 35x7.5/15
(1.4x0.3/0.6)
35 (1.38)
»0,9 kg (1.98 lbs)
42 (1.65)
104 (4.09)
10 20 30 40 50 60 70 80 90 100 110 120
FMU90 - R 1 2 A A A 1 A
feature and option of
the product structure
corresponds to the following
terminal area present?
feature 60; option 2
and/or
feature 80, option 2
2 sensor inputs
and/or
2 analogue outputs
1 (yes)
feature 70, option 3 or 6 3 or 6 relays 1 (yes)
feature 80, option 3 PROFIBUS DP interface 0 (no)
feature 90, option B inputs for external switches and
external temperature sensorr 0 (no)
Sum = 2
2
3
2
A

Prosonic S FMU90 - flow measurement - PROFIBUS DP Installation
Endress+Hauser 15
3.3.2 Installation conditions
• The DIN-rail housing must be mounted outside hazardous areas in a cabinet.
• The housing is mounted on a DIN rail EN 60715 TH 35x7,5 or TH 37x15.
• Do not install the instrument in the vicinity of high-voltage lines, motor lines, contactors or
frequency converters. The installation regulations for high-voltage lines, motor lines, contactors
or frequency converters must be observed.
• To ensure easy mounting and opening of the housing, a distance of approx. 10 mm (0.39 in)
should be kept between the instruments.
• In order to avoid interference signals, the sensor cables must not be laid parallel to high voltage
or electric power lines.
• The cables may not be laid in the proximity to frequnecy converters.
3.3.3 Mounting
L00-FMU90xxx-17-00-00-xx-001
AAttaching the instrument to the rail
BDetaching the instrument from the rail
AB
1.
2.
1.
2.
EN 60715
TH 35x7.5/15
(1.4x0.3/0.6)

Installation Prosonic S FMU90 - flow measurement - PROFIBUS DP
16 Endress+Hauser
3.4 Mounting the remote display and operating module
3.4.1 Scope of delivery
If the Prosonic S is ordered with the display for cabinet door mounting, the following is contained
in the scope of delivery:
• Display and operating module, 96 x 96 mm (3.78 x 3.78 in)
• 4 retainers (with nuts and screws)
• Connection cable (3 m (9.8 ft)) for connection to the transmitter
(preassembled with suitable plugs).
3.4.2 Dimensions of the separate display and operating module
L00-FMU90xxx-06-00-00-xx-004
3.4.3 Mounting
1. Cut an opening of 92 x 92 mm (3.62 x 3.62 in) into the intended mounting position (e.g.
cabinet door).
2. Insert the remote display module into the opening and fix the retainers as shown in the
following figure:
L00-FMU90xxx-17-00-00-xx-002
96
55
max. 6
92
min. 11
~0,5 kg (1.10 lbs)
(0.43)
(3.62)
(0.24)
(3.78)
(2.17)
mm (in)
1.
3. 4.
2.

Prosonic S FMU90 - flow measurement - PROFIBUS DP Installation
Endress+Hauser 17
3.4.4 Adaption plate
If an opening of 138 x 138 mm (5.43 x 5.43 in) and the remote display of the Prosonic FMU860/
861/862 are already present, you can use the adaption plate (Order Code: 52027441 ä117
"Accessories"). It is inserted into the remote display of the FMU860/861/862.
!Note!
The adapter plate is mounted directly in the housing of the old remote display of the FMU86x series.
The housing of the remote display of the FMU86x is the holder for the adapter plate and the new
remote display of the FMU90/FMU95 in the format 96 x 96 mm (3.78 x 3.78 in).
L00-FMU90xxx-06-00-00-xx-006
1 Remote display of the FMU90 with adaption plate
2 Opening of the remote display of the FMU860/861/862
3.5 Mounting of the sensors
Information on the mounting of the sensors can be found in the following documents:
• Technical Information TI00189F/00 (for FDU8x)
• Technical Information TI00396F/00 (for FDU9x)
These documents are supplied with the sensors.
"Caution!
Observe the mounting distances of the sensors as specified ä139, "Pre-programmed flow
curves".
3.6 Installation check
After installing the device, carry out the following checks:
• Is the device damaged (visual inspection)?
• Does the device correspond to the meausring point specifications such as process temperature,
process pressure, ambient temperature, measuring range etc?
• If available: Are the measuring point number and labelling correct?
• Is the instrument sufficiently protected against rainfall and direct sunlight?
• For the field housing: Are the cable glands tightened correctly?
• Is the instrument securely mounted to the DIN rail or the mounting help (visual inspection)?
• For the field housing: Are the screws of the terminal compartment cover securely tightened
(visual inspection)?
1
2

Wiring Prosonic S FMU90 - flow measurement - PROFIBUS DP
18 Endress+Hauser
4 Wiring
#Warning!
The instrument may only be installed if the supply voltage is switched off.
4.1 Terminal compartment
4.1.1 Terminal compartment of the field housing
The field housing has a separate terminal compartment. It can be opened after loosening the four
screws of the lid.
L00-FMU90xxx-04-00-00-xx-002
For easier wiring, the lid can be completely removed by unplugging the display plug and loosening
the hinges:
L00-FMU90KAx-04-00-00-xx-009
4.1.2 Cable entries of the field housing
The following openings for cable entries are prestamped on the bottom of the housing :
• M20x1.5 (10 openings)
• M16x1.5 (5 openings)
• M25x1.5 (1 opening)
The required number and types of cable entries depend on the application at hand.
The prestamped openings can be removed by a suitable tool (e.g. knife or boring bit) or by punching
them out cautiously.
1.
2.
3.
1.
2.

Prosonic S FMU90 - flow measurement - PROFIBUS DP Wiring
Endress+Hauser 19
4.1.3 Terminal compartment of the DIN-rail housing
Single instrument
L00-FMU90xxx-04-00-00-xx-003
The catch can be unlocked by slightly pressing onto the clip. Then, the cover of the terminal
compartment can be opened.
Several instruments mounted side by side
L00-FMU90xxx-04-00-00-xx-012
Open the catch of the cover (e.g. by a screwdriver).
Pull the cover out by approx. 20 mm (0.79 in) .
The cover can now be opened.
!Note!
• The cables can be inserted into the housing from above or from below.
• The pictures show the smallest housing version but are valid for the larger versions as well.
• If the instruments are mounted next to each other and if the sensor cables run in parallel, the
synchronization terminals (39 and 40) must be interconnected (ä20 "Terminal assignment"
and ä31 "Synchronization line").
1. 2.
1.
2.
3.
1.
2.
3.

Wiring Prosonic S FMU90 - flow measurement - PROFIBUS DP
20 Endress+Hauser
4.2 Terminal assignment
Pluggable spring-force terminals for connection of the cables are supplied in the terminal
compartment. Rigid conductors or flexible conductors with cable sleeve can directly be inserted and
are contacted automatically.
The terminal configuration depends on the instrument version ordered. There is a basic terminal
area, which is present in every instrument version. Additonal optional terminal areas are only
present if the respective option has been selected in the product structure.
L00-FMU90xxx-04-00-00-xx-001
Terminals of the Prosonic S (the terminals depicted in grey are not present in every instrument version)
ABasic terminal area
B-E Optional terminal areas (present if the respective option has been selected in the product structure)
!Note!
The depicted switching states of the relays refer to the de-energized state.
Conductor cross section 0.2 mm2to 2.5 mm2(26 to 14 AWG)
Cable and sleeve cross section 0.25 mm2to 2.5 mm2 (24 to 14 AWG)
min. stripping length 10 mm (0.39 in)
Terminal area present for the following instrument versions
Basic area A for all versions
Optional areas
Bfor instrument versions with 2 sensor inputs and/or 2 analogue outputs
(FMU90 - *****2****** and/or FMU90 - *******2****)
Cfor instrument versions with 3 or 6 relays
(FMU90 - ******3***** oder FMU90 - ******6*****)
Dfor instruments with external switch inputs and external temperature input
(FMU90 - ********B***)
Efor instrument versions with PROFIBUS DP interface
(FMU90 - *******3****)
FDU-
Sensor
0/4...20mA
1
42
41
Relay
55
52 54
51 53
50
3
Address
Term.
DP
off
on
off
on
SW
HW
1
2
3
4
5
6
7
8
1
2
3
4
A(N)
66
B(P)
65
Display
POWER
HART
0/4…20mA
Sync
Fuse
I1FDU-
Sensor
RD
11
BK
10
YE
9
40
39
5
4
67
8
11
Service
Relay
32
1
ABCE
2
58
5756
4
61
6059
5
64
6362
6
RD
11
BK
10
YE
9
2
RD
14
BK
13
YE
12
I2
FDU-
Sensor
DigIn
76
73 75
72 74
71
2
D
1
79
7877
3
82
8180
4
85
8483
Temp.