Endress+Hauser Proline t-mass T 150 User manual

Products Solutions Services
OperatingйInstructions
Proline t-mass T 150
HART
Thermalйmassйflowmeter
BA01260D/06/EN/01.13
71237439
Validйasйofйversion
01.00.zzйсDeviceйfirmware)

Prolineйt-massйTй150йHART
2 EndressHauser
• Makeйsureйtheйdocumentйisйstoredйinйaйsafeйplaceйsuchйthatйitйisйalwaysйavailableйwhen
workingйonйorйwithйtheйdevice.
• Toйavoidйdangerйtoйindividualsйorйtheйfacilityйreadйtheй"Basicйsafetyйinstructions"йsection
carefullyйasйwellйasйallйotherйsafetyйinstructionsйinйtheйdocumentйthatйareйspecificйto
workingйprocedures.
• Theйmanufacturerйreservesйtheйrightйtoйmodifyйtechnicalйdataйwithoutйpriorйnotice.йYour
EndressHauserйSalesйCenterйwillйsupplyйyouйwithйcurrentйinformationйandйupdatesйto
theseйInstructions.

Prolineйt-massйTй150йHART Tableйofйcontents
EndressHauser 3
Table of contents
1 Document information .............. 6
1.1 Documentйfunction ..................... 6
1.2 Symbolsйused .......................... 6
1.2.1 Safetyйsymbols .................. 6
1.2.2 Electricalйsymbols ................ 6
1.2.3 Toolйsymbols .................... 7
1.2.4 Symbolsйforйcertainйtypesйof
information .................... 7
1.2.5 Symbolsйinйgraphics ............... 7
1.3 Documentation ........................ 8
1.3.1 Standardйdocumentation ........... 8
1.3.2 Supplementaryйdevice-dependent
documentation .................. 8
1.4 Registeredйtrademarks ................... 8
2 Basic safety instructions ............ 9
2.1 Requirementsйforйtheйpersonnel ............ 9
2.2 Designatedйuse ........................ 9
2.3 Workplaceйsafety ...................... 10
2.4 Operationalйsafety ..................... 10
2.5 Productйsafety ........................ 10
2.6 ITйsecurity ........................... 11
3 Product description ................ 12
3.1 Productйdesign ........................ 12
4 Incoming acceptance and product
identification ..................... 13
4.1 Incomingйacceptance ................... 13
4.2 Productйidentification ................... 14
4.2.1 Transmitterйnameplate ........... 14
4.2.2 Sensorйnameplate ............... 15
4.2.3 Symbolsйonйmeasuringйdevice ...... 16
5 Storage and transport ............. 17
5.1 Storageйconditions ..................... 17
5.2 Transportingйtheйproduct ................ 17
5.3 Packagingйdisposal ..................... 17
6 Installation ....................... 18
6.1 Installationйconditions .................. 18
6.1.1 Mountingйposition ............... 18
6.1.2 Requirementsйfromйenvironmentйand
process ....................... 24
6.2 Mountingйtheйmeasuringйdevice ........... 25
6.2.1 Requiredйtools .................. 25
6.2.2 Preparingйtheйmeasuringйdevice ..... 25
6.2.3 Mountingйtheйmeasuringйdevice ..... 25
6.2.4 Turningйtheйtransmitterйhousing .... 26
6.2.5 Turningйtheйdisplayйmodule ........ 27
6.3 Post-installationйcheck .................. 27
7 Electrical connection .............. 28
7.1 Connectionйconditions .................. 28
7.1.1 Requiredйtools .................. 28
7.1.2 Requirementsйforйconnectingйcable ... 28
7.1.3 Terminalйassignment ............. 28
7.1.4 Pinйassignmentйofйtheйconnector .... 29
7.1.5 Requirementsйforйtheйsupplyйunit .... 29
7.1.6 Preparingйtheйmeasuringйdevice ..... 29
7.2 Connectingйtheйmeasuringйdevice .......... 30
7.2.1 Connectingйtheйcables ............ 30
7.3 Ensuringйtheйdegreeйofйprotection .......... 31
7.4 Post-connectionйcheck .................. 31
8 Operation options ................. 33
8.1 Overviewйofйoperationйoptions ............ 33
8.2 Structureйandйfunctionйofйtheйoperating
menu .............................. 33
8.2.1 Structureйofйtheйoperatingйmenu .... 33
8.2.2 Operatingйphilosophy ............ 35
8.3 Accessйtoйtheйoperatingйmenuйviaйtheйlocal
display ............................. 36
8.3.1 Operationalйdisplay .............. 36
8.3.2 Navigationйview ................ 38
8.3.3 Editingйview ................... 40
8.3.4 Operatingйelements .............. 42
8.3.5 Openingйtheйcontextйmenu ......... 43
8.3.6 Navigatingйandйselectingйfromйlist ... 44
8.3.7 Callingйtheйparameterйdirectly ...... 44
8.3.8 Callingйupйhelpйtext .............. 45
8.3.9 Changingйtheйparameters ......... 46
8.3.10 Userйrolesйandйrelatedйaccess
authorization .................. 47
8.3.11 Disablingйwriteйprotectionйviaйaccess
code ......................... 47
8.3.12 Enablingйandйdisablingйtheйkeypad
lock ......................... 47
8.4 Accessйtoйtheйoperatingйmenuйviaйthe
operatingйtool ........................ 49
8.4.1 Connectingйtheйoperatingйtool ...... 49
8.4.2 FieldйXpertйSFX350йSFX370 ....... 50
8.4.3 FieldCare ..................... 50
8.4.4 AMSйDeviceйManager ............ 51
8.4.5 SIMATICйPDM .................. 51
8.4.6 FieldйCommunicatorй475 .......... 52
9 System integration ................ 53
9.1 Overviewйofйdeviceйdescriptionйfiles ......... 53
9.1.1 Currentйversionйdataйforйtheйdevice ... 53
9.1.2 Operatingйtools ................. 53
9.2 MeasuredйvariablesйviaйHARTйprotocol ...... 53
9.3 Otherйsettings ........................ 54

Tableйofйcontents Prolineйt-massйTй150йHART
4 EndressHauser
10 Commissioning .................... 55
10.1 Functionйcheck ....................... 55
10.2 Switchingйonйtheйmeasuringйdevice ......... 55
10.3 Settingйtheйoperatingйlanguage ............ 55
10.4 Configuringйtheйmeasuringйdevice .......... 56
10.4.1 Definingйtheйtagйname ............ 58
10.5 Advancedйsettings ..................... 59
10.5.1 Settingйtheйsystemйunits .......... 60
10.5.2 Configuringйtheйcurrentйoutput ..... 61
10.5.3 Configuringйtheйpulse/frequency/
switchйoutput .................. 63
10.5.4 Configuringйtheйstatusйinput ....... 69
10.5.5 Configuringйtheйoutput
conditioning ................... 70
10.5.6 Configuringйtheйlowйflowйcutйoff ..... 70
10.5.7 Configuringйtheйtotalizer .......... 71
10.5.8 Carryingйoutйadditionalйdisplay
configurations .................. 71
10.5.9 Partlyйfilledйpipeйdetection ......... 73
10.5.10 Performingйin-situйadjustment ...... 74
10.6 Configurationйmanagement .............. 77
10.6.1 Functionйscopeйofй""Configuration
management"йparameter" .......... 78
10.7 Simulation ........................... 78
10.8 Protectingйsettingsйfromйunauthorized
access .............................. 80
10.8.1 Writeйprotectionйviaйaccessйcode ..... 80
10.8.2 Writeйprotectionйviaйwriteйprotection
switch ........................ 81
11 Operation ......................... 83
11.1 Readingйdeviceйlockingйstatus ............. 83
11.2 Adjustingйtheйoperatingйlanguage .......... 83
11.3 Configuringйtheйdisplay ................. 83
11.4 Readingйmeasuredйvalues ................ 84
11.4.1 Processйvariables ................ 84
11.4.2 Totalizer ...................... 84
11.4.3 Inputйvalues ................... 85
11.4.4 Outputйvalues .................. 85
11.5 Adaptingйtheйmeasuringйdeviceйtoйtheйprocess
conditions ........................... 86
11.6 Performingйaйtotalizerйreset .............. 86
11.6.1 Functionйscopeйofй"ControlйTotalizerй"
parameter ..................... 87
11.6.2 Functionйscopeйofй"Resetйallйtotalizers"
parameter ..................... 87
11.7 Showingйdataйlogging ................... 87
12 Diagnostics and troubleshooting ... 89
12.1 Generalйtroubleshooting ................. 89
12.2 Diagnosticйinformationйonйlocalйdisplay ...... 91
12.2.1 Diagnosticйmessage .............. 91
12.2.2 Callingйupйremedialйmeasures ...... 94
12.3 DiagnosticйinformationйinйFieldCare ........ 94
12.3.1 Diagnosticйoptions ............... 94
12.3.2 Callingйupйremedialйmeasures ...... 96
12.4 Adaptingйtheйdiagnosticйinformation ....... 96
12.4.1 Adaptingйtheйdiagnosticйbehavior .... 96
12.5 Overviewйofйdiagnosticйinformationй ........ 97
12.6 Pendingйdiagnosticйmessages ............. 99
12.7 Diagnosticйlist ....................... 100
12.8 Eventйlogbook ....................... 100
12.8.1 Eventйhistory .................. 100
12.8.2 Filteringйtheйeventйlogbook ....... 101
12.8.3 Overviewйofйinformationйevents .... 101
12.9 Resettingйtheйmeasuringйdevice .......... 102
12.10 Deviceйinformation ................... 102
12.11 Firmwareйhistory ..................... 103
13 Maintenance .................... 104
13.1 Maintenanceйtasks .................... 104
13.1.1 Exteriorйcleaning ............... 104
13.1.2 Interiorйcleaning ............... 104
13.2 Measuringйandйtestйequipment ........... 104
13.3 EndressHauserйservices ............... 104
14 Repair ........................... 105
14.1 Generalйnotes ....................... 105
14.2 Spareйparts ......................... 105
14.3 EndressHauserйservices ............... 105
14.4 Return ............................. 105
14.5 Disposal ........................... 105
14.5.1 Removingйtheйmeasuringйdevice .... 105
14.5.2 Disposingйofйtheйmeasuringйdevice .. 106
15 Accessories ...................... 107
15.1 Device-specificйaccessories .............. 107
15.1.1 Forйtheйtransmitter ............. 107
15.1.2 Forйtheйsensor ................. 107
15.2 Communication-specificйaccessories ....... 108
15.3 Service-specificйaccessories .............. 109
15.4 Systemйcomponents ................... 109
16 Technical data ................... 110
16.1 Application ......................... 110
16.2 Functionйandйsystemйdesign ............. 110
16.3 Input .............................. 110
16.4 Output ............................ 112
16.5 Powerйsupply ........................ 114
16.6 Performanceйcharacteristics ............. 115
16.7 Installation ......................... 116
16.8 Environment ........................ 116
16.9 Process ............................ 117
16.10 Mechanicalйconstruction ............... 118
16.11 Operability ......................... 122
16.12 Certificatesйandйapprovals .............. 123
16.13 Accessories ......................... 124
16.14 Documentation ...................... 124
17 Appendix ........................ 125
17.1 Overviewйofйtheйoperatingйmenu .......... 125
17.1.1 Mainйmenu ................... 125

Prolineйt-massйTй150йHART Tableйofйcontents
EndressHauser 5
17.1.2 "Operation"йmenu ............... 125
17.1.3 "Setup"йmenu .................. 125
17.1.4 "Diagnostics"йmenu .............. 131
17.1.5 "Expert"йmenu ................. 133
Index ................................. 143

Documentйinformation Prolineйt-massйTй150йHART
6 EndressHauser
1 Document information
1.1 Document function
TheseйOperatingйInstructionsйcontainйallйtheйinformationйthatйisйrequiredйinйvariousйphases
ofйtheйlifeйcycleйofйtheйdevice:йfromйproductйidentificationйincomingйacceptanceйand
storageйtoйmountingйconnectionйoperationйandйcommissioningйthroughйto
troubleshootingйmaintenanceйandйdisposal.
1.2 Symbols used
1.2.1 Safety symbols
Symbol Meaning
DANGER
ййA0011189-EN
DANGER!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйwillйresultйin
seriousйorйfatalйinjury.
WARNING
ййA0011190-EN
WARNING!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйcanйresultйin
seriousйorйfatalйinjury.
CAUTION
ййA0011191-EN
CAUTION!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйcanйresultйin
minorйorйmediumйinjury.
NOTICE
ййA0011192-EN
NOTE!
Thisйsymbolйcontainsйinformationйonйproceduresйandйotherйfactsйwhichйdoйnotйresultйin
personalйinjury.
1.2.2 Electrical symbols
Symbol Meaning
ййA0011197
Direct current
AйterminalйtoйwhichйDCйvoltageйisйappliedйorйthroughйwhichйdirectйcurrentйflows.
ййA0011198
Alternating current
Aйterminalйtoйwhichйalternatingйvoltageйсsine-wave)йisйappliedйorйthroughйwhichйalternating
currentйflows.
ййA0011200
Ground connection
Aйgroundedйterminalйwhichйasйfarйasйtheйoperatorйisйconcernedйisйgroundedйviaйaйgrounding
system.
ййA0011199
Protective ground connection
Aйterminalйwhichйmustйbeйconnectedйtoйgroundйpriorйtoйestablishingйanyйotherйconnections.
ййA0011201
Equipotential connection
Aйconnectionйthatйhasйtoйbeйconnectedйtoйtheйplantйgroundingйsystem:йThisйmayйbeйaйpotential
equalizationйlineйorйaйstarйgroundingйsystemйdependingйonйnationalйorйcompanyйcodesйofйpractice.

Prolineйt-massйTй150йHART Documentйinformation
EndressHauser 7
1.2.3 Tool symbols
Symbol Meaning
ййA0013442
Torxйscrewdriver
ййA0011220
Flatйbladeйscrewdriver
ййA0011219
Phillipsйheadйscrewdriver
ййA0011221
Allenйkey
ййA0011222
Hexagonйwrench
1.2.4 Symbols for certain types of information
Symbol Meaning
ййA0011182
Allowed
Indicatesйproceduresйprocessesйorйactionsйthatйareйallowed.
ййA0011183
Preferred
Indicatesйproceduresйprocessesйorйactionsйthatйareйpreferred.
ййA0011184
Forbidden
Indicatesйproceduresйprocessesйorйactionsйthatйareйforbidden.
ййA0011193
Tip
Indicatesйadditionalйinformation.
ййA0011194
Reference to documentation
Refersйtoйtheйcorrespondingйdeviceйdocumentation.
ййA0011195
Reference to page
Refersйtoйtheйcorrespondingйpageйnumber.
ййA0011196
Reference to graphic
Refersйtoйtheйcorrespondingйgraphicйnumberйandйpageйnumber.
,… ,
Series of steps
Result of a sequence of actions
ййA0013562
Help in the event of a problem
1.2.5 Symbols in graphics
Symbol Meaning
1, 2, 3,... Itemйnumbers
,… ,
Seriesйofйsteps
A, B, C, ... Views
A-A, B-B, C-C, ... Sections
ййA0013441
Flowйdirection

Documentйinformation Prolineйt-massйTй150йHART
8 EndressHauser
Symbol Meaning
-
ййA0011187
Hazardous area
Indicatesйaйhazardousйarea.
.
ййA0011188
Safe area (non-hazardous area)
Indicatesйtheйnon-hazardousйarea.
1.3 Documentation
ForйanйoverviewйofйtheйscopeйofйtheйassociatedйTechnicalйDocumentationйreferйtoйthe
following:
• TheйCD-ROMйprovidedйforйtheйdeviceйсdependingйonйtheйdeviceйversionйtheйCD-ROM
mightйnotйbeйpartйofйtheйdeliveryк)
• TheйW@M Device Viewer :йEnterйtheйserialйnumberйfromйtheйnameplate
сwww.endress.com/deviceviewer)
• TheйEndress+Hauser Operations App:йEnterйtheйserialйnumberйfromйtheйnameplate
orйscanйtheй2-DйmatrixйcodeйсQRйcode)йonйtheйnameplate.
Forйaйdetailedйlistйofйtheйindividualйdocumentsйalongйwithйtheйdocumentationйcode
сййй124)
1.3.1 Standard documentation
Document type Purpose and content of the document
Technical
Information
Planning aid for your device
Theйdocumentйcontainsйallйtheйtechnicalйdataйonйtheйdeviceйandйprovidesйanйoverviewйof
theйaccessoriesйandйotherйproductsйthatйcanйbeйorderedйforйtheйdevice.
BriefйOperating
Instructions
Guide that takes you quickly to the 1st measured value
TheйBriefйOperatingйInstructionsйcontainйallйtheйessentialйinformationйfromйincoming
acceptanceйtoйinitialйcommissioning.
1.3.2 Supplementary device-dependent documentation
Additionalйdocumentsйareйsuppliedйdependingйonйtheйdeviceйversionйordered:йAlways
complyйstrictlyйwithйtheйinstructionsйinйtheйsupplementaryйdocumentation.йThe
supplementaryйdocumentationйisйanйintegralйpartйofйtheйdeviceйdocumentation.
1.4 Registered trademarks
HART®
RegisteredйtrademarkйofйtheйHARTйCommunicationйFoundationйAustinйUSA
KALREZ ®, VITON ®
RegisteredйtrademarksйofйDuPontйPerformanceйElastomersйL.L.C.йWilmingtonйDEйUSA
Applicator®, FieldCare®, Field XpertTM, HistoROM®, Heartbeat TechnologyTM
Registeredйorйregistration-pendingйtrademarksйofйtheйEndressHauserйGroup

Prolineйt-massйTй150йHART Basicйsafetyйinstructions
EndressHauser 9
2 Basic safety instructions
2.1 Requirements for the personnel
Theйpersonnelйforйinstallationйcommissioningйdiagnosticsйandйmaintenanceйmustйfulfill
theйfollowingйrequirements:
‣Trainedйqualifiedйspecialistsйmustйhaveйaйrelevantйqualificationйforйthisйspecificйfunction
andйtask
‣Areйauthorizedйbyйtheйplantйowner/operator
‣Areйfamiliarйwithйfederal/nationalйregulations
‣Beforeйbeginningйworkйtheйspecialistйstaffйmustйhaveйreadйandйunderstoodйthe
instructionsйinйtheйOperatingйInstructionsйandйsupplementaryйdocumentationйasйwellйas
inйtheйcertificatesйсdependingйonйtheйapplication)
‣Followingйinstructionsйandйbasicйconditions
Theйoperatingйpersonnelйmustйfulfillйtheйfollowingйrequirements:
‣Beingйinstructedйandйauthorizedйaccordingйtoйtheйrequirementsйofйtheйtaskйbyйthe
facilityрsйowner-operator
‣FollowingйtheйinstructionsйinйtheseйOperatingйInstructions
2.2 Designated use
Application and media
TheйmeasuringйdeviceйdescribedйinйtheseйOperatingйInstructionsйisйintendedйonlyйforйflow
measurementйofйliquids.
Measuringйdevicesйforйuseйinйhazardousйareasйinйhygienicйapplicationsйorйinйapplications
whereйthereйisйanйincreasedйriskйdueйtoйprocessйpressureйareйlabeledйaccordinglyйonйthe
nameplate.
Toйensureйthatйtheйmeasuringйdeviceйremainsйinйproperйconditionйforйtheйoperationйtime:
‣Onlyйuseйtheйmeasuringйdeviceйinйfullйcomplianceйwithйtheйdataйonйtheйnameplateйand
theйgeneralйconditionsйlistedйinйtheйOperatingйInstructionsйandйsupplementary
documentation.
‣Basedйonйtheйnameplateйcheckйwhetherйtheйorderedйdeviceйisйpermittedйforйthe
intendedйuseйinйtheйhazardousйareaйсe.g.йexplosionйprotectionйpressureйvesselйsafety).
‣Useйtheйmeasuringйdeviceйonlyйforйmediaйagainstйwhichйtheйprocess-wettedйmaterials
areйadequatelyйresistant.
‣Ifйtheйmeasuringйdeviceйisйnotйoperatedйatйatmosphericйtemperatureйcomplianceйwith
theйrelevantйbasicйconditionsйspecifiedйinйtheйdeviceйdocumentationйprovidedйсonйthe
CD-ROM)йisйabsolutelyйessential.
Incorrect use
Non-designatedйuseйcanйcompromiseйsafety.йTheйmanufacturerйisйnotйliableйforйdamage
causedйbyйimproperйorйnon-designatedйuse.
฀WARNING
Risk of injury if the process connection and sensor gland are opened under pressure.
‣Theйprocessйconnectionйandйtheйsensorйglandйshouldйonlyйbeйopenedйinйan
unpressurizedйstate.
NOTICE
Penetration of dust and moisture when the transmitter housing is opened.
‣Onlyйopenйtheйtransmitterйhousingйbrieflyйensuringйthatйnoйdustйorйmoistureйentersйthe
housing.

Basicйsafetyйinstructions Prolineйt-massйTй150йHART
10 EndressHauser
NOTICE
Danger of breakage of the sensor due to corrosive or abrasive fluids!
‣Verifyйtheйcompatibilityйofйtheйprocessйfluidйwithйtheйsensorйmaterial.
‣Ensureйtheйresistanceйofйallйfluid-wettedйmaterialsйinйtheйprocess.
‣Keepйwithinйtheйspecifiedйpressureйandйtemperatureйrange.
Verificationйforйborderlineйcases:
‣ForйspecialйfluidsйandйfluidsйforйcleaningйEndressHauserйisйgladйtoйprovideйassistance
inйverifyingйtheйcorrosionйresistanceйofйfluid-wettedйmaterialsйbutйdoesйnotйacceptйany
warrantyйorйliabilityйasйminuteйchangesйinйtheйtemperatureйconcentrationйorйlevelйof
contaminationйinйtheйprocessйcanйalterйtheйcorrosionйresistanceйproperties.
Residual risks
Theйexternalйsurfaceйtemperatureйofйtheйhousingйcanйincreaseйbyйmax.й15йKйdueйtoйthe
powerйconsumptionйofйtheйelectronicйcomponents.йHotйprocessйfluidsйpassingйthroughйthe
measuringйdeviceйwillйfurtherйincreaseйtheйsurfaceйtemperatureйofйtheйhousing.йTheйsurface
ofйtheйsensorйinйparticularйcanйreachйtemperaturesйwhichйareйcloseйtoйtheйfluid
temperature.
Possibleйburnйhazardйdueйtoйfluidйtemperaturesк
‣Forйelevatedйfluidйtemperatureйensureйprotectionйagainstйcontactйtoйpreventйburns.
2.3 Workplace safety
Forйworkйonйandйwithйtheйdevice:
‣Wearйtheйrequiredйpersonalйprotectiveйequipmentйaccordingйtoйfederal/national
regulations.
Forйweldingйworkйonйtheйpiping:
‣Doйnotйgroundйtheйweldingйunitйviaйtheйmeasuringйdevice.
2.4 Operational safety
Riskйofйinjuryк
‣Operateйtheйdeviceйinйproperйtechnicalйconditionйandйfail-safeйconditionйonly.
‣Theйoperatorйisйresponsibleйforйinterference-freeйoperationйofйtheйdevice.
Conversions to the device
Unauthorizedйmodificationsйtoйtheйdeviceйareйnotйpermittedйandйcanйleadйtoйunforeseeable
dangers.
‣IfйdespiteйthisйmodificationsйareйrequiredйconsultйwithйEndressHauser.
Repair
Toйensureйcontinuedйoperationalйsafetyйandйreliability
‣Carryйoutйrepairsйonйtheйdeviceйonlyйifйtheyйareйexpresslyйpermitted.
‣Observeйfederal/nationalйregulationsйpertainingйtoйrepairйofйanйelectricalйdevice.
‣UseйoriginalйspareйpartsйandйaccessoriesйfromйEndressHauserйonly.
2.5 Product safety
Thisйmeasuringйdeviceйisйdesignedйinйaccordanceйwithйgoodйengineeringйpracticeйtoйmeet
state-of-the-artйsafetyйrequirementsйhasйbeenйtestedйandйleftйtheйfactoryйinйaйconditionйin
whichйitйisйsafeйtoйoperate.
Itйmeetsйgeneralйsafetyйstandardsйandйlegalйrequirements.йItйalsoйcompliesйwithйtheйEC
directivesйlistedйinйtheйdevice-specificйECйDeclarationйofйConformity.йEndressHauser
confirmsйthisйbyйaffixingйtheйCEйmarkйtoйtheйdevice.

Prolineйt-massйTй150йHART Basicйsafetyйinstructions
EndressHauser 11
2.6 IT security
Weйonlyйprovideйaйwarrantyйifйtheйdeviceйisйinstalledйandйusedйasйdescribedйinйthe
OperatingйInstructions.йTheйdeviceйisйequippedйwithйsecurityйmechanismsйtoйprotectйit
againstйanyйinadvertentйchangesйtoйtheйdeviceйsettings.
ITйsecurityйmeasuresйinйlineйwithйoperatorsрйsecurityйstandardsйandйdesignedйtoйprovide
additionalйprotectionйforйtheйdeviceйandйdeviceйdataйtransferйmustйbeйimplementedйbyйthe
operatorsйthemselves.
EndressHauserйcanйbeйcontactedйtoйprovideйsupportйinйperformingйthisйtask.

Productйdescription Prolineйt-massйTй150йHART
12 EndressHauser
3 Product description
3.1 Product design
1
2
22
23
24
25
26
27
7
Esc
123 4 56
8
ййA0017196
1 Electronics compartment cover
2 Display module
3 Terminal block
4 Electronics module
5 Cable gland
6 Transmitter housing
7 Sensor
8 S-DAT

Prolineйt-massйTй150йHART Incomingйacceptanceйandйproductйidentification
EndressHauser 13
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
ййA0015502
1
+
2
1
+
2
ййA0013843
Isйtheйorderйcodeйonйtheйdeliveryйnoteйс1)йidenticalйtoйtheйorderйcodeйonйtheйproductйsticker
с2)?
й
й
ййA0013695
й
й
ййA0015502
ййA0013698
Areйtheйgoodsйundamaged?
й
й
ййA0015502
ййA0013699
Doйtheйnameplateйdataйmatchйtheйorderingйinformationйonйtheйdeliveryйnote?
й
й
ййA0015502
ййA0013697
IsйtheйCD-ROMйwithйtheйTechnicalйDocumentationйandйdocumentsйpresent?

Incomingйacceptanceйandйproductйidentification Prolineйt-massйTй150йHART
14 EndressHauser
IfйoneйofйtheйconditionsйdoesйnotйcomplyйcontactйyourйEndressHauserйdistributor.
4.2 Product identification
Theйfollowingйoptionsйareйavailableйforйidentificationйofйtheйmeasuringйdevice:
• Nameplateйspecifications
• Orderйcodeйwithйbreakdownйofйtheйdeviceйfeaturesйonйtheйdeliveryйnote
• EnterйserialйnumbersйfromйnameplatesйinйW@M Device Viewer
сwww.endress.com/deviceviewer):йAllйinformationйaboutйtheйmeasuringйdeviceйis
displayed.
ForйanйoverviewйofйtheйscopeйofйtheйTechnicalйDocumentationйprovidedйreferйtoйthe
following:
• Theйchaptersй"Additionalйstandardйdocumentationйonйtheйdevice"йсййй8)йand
"Supplementaryйdevice-dependentйdocumentation"
• TheйW@M Device Viewer :йEnterйtheйserialйnumberйfromйtheйnameplate
сwww.endress.com/deviceviewer)
4.2.1 Transmitter nameplate
Patents
i
i
Order code:
Ext. ord. cd.:
Ser. no.:
1
23 4 5 6 7
17
16
15 14 13
8
9
10
11
12
ййA0017229
 1 Example of a transmitter nameplate
1 Manufacturing location
2 Name of the transmitter
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Electrical connection data, e.g. available inputs and outputs, supply voltage
7 Type of cable glands
8 Degree of protection
9 Approval information for explosion protection
10 Document number of safety-related supplementary documentation
11 2-D matrix code
12 Manufacturing date: year-month
13 Permitted temperature range for cable
14 Additional information on version: certificates, approvals
15 CE mark, C-Tick
16 Firmware version (FW) and device revision (Dev.Rev.) from the factory
17 Permitted ambient temperature (Ta)

Prolineйt-massйTй150йHART Incomingйacceptanceйandйproductйidentification
EndressHauser 15
4.2.2 Sensor nameplate
Ser. no.: P:
Tm:
Materials:
Ser.No.:
Date:
1
3
11
7
6
4
2
1
7
6
10 8
9
Seals:
5
ййA0022136
 2 Example of a sensor nameplate
1 Name of the sensor
2 Process pressure range
3 Medium temperature range
4 Measuring tube material
5 Seal material
6 CE mark, C-Tick
7 Serial number (Ser. no.)
8 Approval information for Pressure Equipment Directive
9 Manufacturing date: year-month
10 Sensor length
11 Thread data
Additional sensor nameplate
Orderйcodeйforй"Additional approval"йoptionйLPй"3A"
Orderйcodeйforй"Additional approval"йoptionйLTй"EHEDG"

Incomingйacceptanceйandйproductйidentification Prolineйt-massйTй150йHART
16 EndressHauser
12
3
ййA0022298
 3 Example of an additional sensor nameplate for 3A and/or EHEDG
1 Approval category (EHEDG)
2 Approval date (EHEDG)
3 Standard and release (3A)
4.2.3 Symbols on measuring device
Symbol Meaning

WARNING!
Thisйsymbolйalertsйyouйtoйaйdangerousйsituation.йFailureйtoйavoidйthisйsituationйcanйresultйinйserious
orйfatalйinjury.
ййA0011194
Reference to documentation
Refersйtoйtheйcorrespondingйdeviceйdocumentation.
ййA0011199
Protective ground connection
Aйterminalйwhichйmustйbeйconnectedйtoйgroundйpriorйtoйestablishingйanyйotherйconnections.

Prolineйt-massйTй150йHART Storageйandйtransport
EndressHauser 17
5 Storage and transport
5.1 Storage conditions
Observeйtheйfollowingйnotesйforйstorage:
• Storeйinйtheйoriginalйpackagingйtoйensureйprotectionйfromйshock.
• Doйnotйremoveйtheйprotectionйcapйmountedйonйtheйtransducer.йItйpreventsйmechanical
damageйandйcontaminationйinйtheйmeasuringйtube.
• Protectйfromйdirectйsunlightйtoйavoidйunacceptablyйhighйsurfaceйtemperatures.
• Selectйaйstorageйlocationйwhereйmoistureйcannotйcollectйinйtheйmeasuringйdeviceйas
fungusйandйbacteriaйinfestationйcanйdamageйtheйlining.
• Storageйtemperature:й–40йtoй60й°Cйс–40йtoй140й°F)
• Storeйinйaйdryйandйdust-freeйplace.
• Doйnotйstoreйoutdoors.
5.2 Transporting the product
Observeйtheйfollowingйnotesйduringйtransport:
• Transportйtheйmeasuringйdeviceйtoйtheйmeasuringйpointйinйtheйoriginalйpackaging.
• Doйnotйremoveйtheйprotectionйcapйmountedйonйtheйtransducer.йItйpreventsйmechanical
damageйandйcontaminationйinйtheйmeasuringйtube.
5.3 Packaging disposal
Allйpackagingйmaterialsйareйenvironmentallyйfriendlyйandй100%йrecyclable:
• Measuringйdeviceйsecondaryйpackaging:йpolymerйstretchйfilmйthatйconformsйtoйEC
Directiveй2002/95/ECйсRoHS).
• Packaging:
– WoodйcrateйtreatedйinйaccordanceйwithйISPMй15йstandardйwhichйisйconfirmedйbyйthe
affixedйIPPCйlogo.
or
– CartonйinйaccordanceйwithйEuropeanйPackagingйDirectiveй94/62EC;йrecyclabilityйis
confirmedйbyйtheйaffixedйRESYйsymbol.
• Seaworthyйpackagingйсoptional):йWoodйcrateйtreatedйinйaccordanceйwithйISPMй15
standardйwhichйisйconfirmedйbyйtheйaffixedйIPPCйlogo.
• Carryingйandйmountingйhardware:
– Disposableйplasticйpallet
– Plasticйstraps
– Plasticйadhesiveйstrips
• Dunnage:йPaperйcushion

Installation Prolineйt-massйTй150йHART
18 EndressHauser
6 Installation
6.1 Installation conditions
Forйmechanicalйreasonsйandйtoйprotectйtheйpipeйsupportйisйrecommendedйforйheavyйsensors
сe.g.йwithйaйhot-tapйretractableйassembly).
6.1.1 Mounting position
Mounting location
NOTICE
Thermal measuring devices require a fully developed flow profile as a prerequisite for
correct flow measurement.
Forйthisйreasonйpleaseйpayйattentionйtoйtheйfollowingйpointsйandйdocumentйsectionsйwhen
installingйtheйdevice:
‣Avoidйflowйdisturbancesйasйtheйthermalйmeasuringйprincipleйreactsйsensitivelyйtoйthem.
‣Forйmechanicalйreasonsйandйtoйprotectйtheйpipeйsupportйisйrecommendedйforйheavy
sensorsйсe.g.йwhenйinstallingйaйHotйtapйextractionйassembly).
‣Maintainйpre-definedйdeviceйinsertionйdepthйofй8йmmйс0.31йin).
Orientation
Theйdirectionйofйtheйarrowйonйtheйsensorйbodyйhelpsйyouйtoйinstallйtheйsensorйaccordingйto
theйflowйdirectionйсdirectionйofйmediumйflowйthroughйtheйpiping).
Forйdetailedйinformationйonйaligningйwithйtheйflowйdirection:йсййй23)
Installationйisйgenerallyйnotйrecommendedйinйtheйeventйofйhighйvibrationsйorйunstable
internalйfittings.
Orientation Recommendation
Verticalйorientation
ййA0017337
йй1)
Horizontalйorientationйtransmitterйhead
up
ййA0015589

Horizontalйorientationйtransmitterйhead
down
ййA0015590

1) Partiallyйfilledйpipeйdetectionйisйnotйpossibleйinйthisйorientation.
Forйdetailedйinformationйaboutйpartiallyйfilledйpipeйdetectionйreferйtoйtheй"In-situ
adjustment"йchapterйсййй74)

Prolineйt-massйTй150йHART Installation
EndressHauser 19
Pipes
The measuring device must be professionally installed, and the following points must
be observed:
• Pipingйmustйbeйprofessionallyйwelded.
• Sealsйmustйbeйsizedйcorrectly.
• Flangesйandйsealsйmustйbeйcorrectlyйaligned.
• Theйinternalйdiameterйofйtheйpipeйmustйbeйknown.йDeviationsйcauseйadditionalйmeasuring
uncertainty.
• Followingйinstallationйtheйpipeйmustйbeйfreeйfromйdirtйandйparticlesйinйorderйtoйavoid
damageйtoйtheйsensors.
FurtherйinformationййISOйstandardй14511
ййA0005103
Correctlyйalignedйflangesйandйseals
Insertion depth
Standard version
Orderйcodeйforй"Insertion Length"йoptionйL5й"110mm 4""йandйL6й"330mm 13""
NOTICE
Metal clamping ferrules undergo plastic deformation during the initial installation.
Asйaйresultйtheйinsertionйdepthйisйfixedйafterйinitialйinstallationйandйtheйclampingйferrules
canйnoйlongerйbeйreplaced.
‣Payйattentionйtoйinformationйonйpreconditionsйandйonйdeterminingйtheйinsertionйdepth.
‣Checkйtheйinsertionйdepthйcloselyйbeforeйtighteningйtheйclampingйferrules.
Preconditions
AB
D
C
110
110
ййA0022049
A Fixed insertion depth 8 mm (0.31 in) ±2 mm (0.08 in)
B Pipe wall thickness
C Mounting boss height
D Socket height (incl. coupling)
1. DetermineйpipeйwallйthicknessйсB).
2. MeasureйsocketйheightйсD).
NOTE!йMountingйforйtheйfirstйtime:йTightenйthreadйadapterйnutйofйtheйcoupling
handйtight.
3. ObserveйtheйmaximumйsocketйheightйD.

Installation Prolineйt-massйTй150йHART
20 EndressHauser
NOTE!йTheйpipeйwallйthicknessйсB)йandйsocketйheightйсD)йmayйnotйexceedйthe
permittedйheight.
BййDйmayйnotйbeйgreaterйthanй102йmmйс4.02йin).
4. IfйaйmountingйbossйisйusedйpayйattentionйtoйmountingйbossйheightйC.
NOTE!йTheйpipeйwallйthicknessйсB)йandйmountingйbossйheightйсC)йmayйnotйexceed
theйpermittedйheight.
BййCйmayйnotйbeйgreaterйthanй53йmmйс2.09йin).
Determining the insertion depth before mounting for the first time
‣Forйallйnominalйdiameters:й8ййBййDй-1
Controlling the insertion depth after mounting
‣Forйallйnominalйdiameters:й8ййBййD
Hygienic version
Orderйcodeйforй"Insertion Length"йoptionйLHй"Hygienic version"
Factory length
Orderйcodeйforй"Insertion Tube Material; Sensor"йoptionйBBй"Stainless steel, factory length,
0.8μm, mechanically polished"йandйoptionйBCй"Stainless steel, factory length, 0.4μm,
mechanically polished"
NOTICE
Certain dimensions are required to comply with the factory length.
‣Payйattentionйtoйinformationйinйtheйdimensionйdrawings.
Preconditions
G
F
DE
A
X
B
ййA0022058
A Fixed insertion depth 8 mm (0.31 in) ±2 mm (0.08 in)
B Pipe wall thickness
D Socket height
E Seal thickness
X Length
G Socket internal diameter
1. DetermineйpipeйwallйthicknessйсB).
2. IfйaйTri-ClampйprocessйconnectionйisйusedйdetermineйsealйthicknessйсE).
NOTE!йTheйsocketйinternalйdiameterйсG)йmayйnotйbeйsmallerйthan
25йmmйс0.98йin).
3. Ifйaйconicalйcouplingйprocessйconnectionйwithйaйself-centeringйsealingйringйisйused
determineйsealйthicknessйсE).