Eneo MEP-63M2812M0A User manual

EN
User Manual
1/2.9” HD Dome, Fixed,
Day&Night, 1920x1080, 2.8-
12mm, Infrared, 12VDC, IP66
MEP-63M2812M0A

2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO
NOT INSERT ANY METALLIC OBJECTS THROUGH THE
VENTILATION GRILLS OR OTHER OPENINGS ON THE
EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

3
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC INFORMATION: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.

5
Table of Contents
1 Introduction...................................................................................................................6
1.1 Features............................................................................................................................6
2 Installation and Configuration.....................................................................................7
2.1 Package Contents............................................................................................................7
2.2 Installing the Camera.......................................................................................................7
2.3 Setting the Camera..........................................................................................................8
2.4 Connections.....................................................................................................................9
2.5 OSD Menu Structure......................................................................................................10
3 OSD Menu....................................................................................................................11
3.1 Lens................................................................................................................................11
3.2 Exposure........................................................................................................................11
3.3 Backlight ........................................................................................................................13
3.4 White Balance................................................................................................................13
3.5 Day & Night ....................................................................................................................14
3.6 Image..............................................................................................................................14
3.7 Function .........................................................................................................................15
3.8 System............................................................................................................................17
3.9 AF....................................................................................................................................18
3.10 Exit................................................................................................................................18
4 Appendix .....................................................................................................................19
4.1 Specification ..................................................................................................................19
4.2 Dimension......................................................................................................................20

6
1 Introduction
1.1 Features
• 1/2.9” SONY Exmor CMOS image sensor
• 2.8 ~ 12mm motorized varifocal lens
• True D/N (Auto, Day, Night)
• 28ea IR LEDs
• Auto exposure control (1/50,000 ~ x30 second)
• White balance control (AWB, ATW,AWC, Indoor, Outdoor, Manual)
• BLC (Back Light Compensation)
• HSBLC (High Suppress Back Light Compensation)
• Digital WDR (Wide Dynamic Range)
• DNR (Digital Nosie Reduction)
• 4 Motion detection areas
• 4 Privacy areas
• Defect Detections (Live DPC, White DPC, Black DPC)
• 357˚ Pan range, 100˚ Tilt range
• 12VDC for Camera
• Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source
only.

7
2 Installation and Configuration
2.1 Package Contents
The package contains the following.
• Camera 1
• Instruction Manual (This Document) 1
• Template Sheet 1
• Accessory Kit 1
2.2 Installing the Camera
The camera is for use in surface or pendent mounting applications, and the mounting member
must be capable of supporting loads of up to 4.5 kg. (Pendent mounting must use pendent mount
accessory.)
The camera should be attached to a structural object, such as hard wood, wall stud or ceiling rafter
that supports the weight of the camera.
1. Make screw holes on the ceiling using the supplied mounting Template Sheet.
2. Fix the camera to the ceiling using supplied Anchors (4x) and Mounting Screws (4x).
CAUTION 1: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
CAUTION 2: Do NOT try to pan and tilt the camera head manually by hand.
The camera pan/tilt gear can be damaged.

8
2.3 Setting the Camera
NOTE: Open the cover and change the video output setting.
The cover should be closed after video output setting.
S1
You can set video signal with S1.
Position Left Center Right
Video Signal AHD Output HD-TVI Output CVBS Output

9
2.4 Connections
No. Connector Description
1 DC jack 12VDC
2 BNC jack VIDEO OUTPUT
The camera must be installed by qualified service personnel in accordance with all local and
federal electrical and building codes.
• Connecting Video Output connector
Connect the video output (BNC) connector to the video input.
• Connecting the Power
Connect power of 12VDC for the camera.
When using a 12VDC adapter, connect the positive (+) pole to the ‘+’ position and
the negative (-) pole to the ‘-’ position.
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source
only.

10
2.5 OSD Menu Structure
MAIN MENU
LENS
EXPOSURE
BACKLIGHT
WHITE BAL
DAY&NIGHT
IMAGE
FUNCTION
SYSTEM
AF
EXIT
LENS
DC
MANUAL
EXPOSURE
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
RETURN
BACKLIGHT
OFF
BLC
HSBLC
WHITE BAL
AWB
ATW
AWCSET
INDOOR
OUTDOOR
MANAUL
DAY&NIGHT
AUTO
COLOR
B&W
IMAGE
SHARPNESS
LSC
D-EFFECT
RETURN
FUNCTION
DNR
MOTION
PRIVACY
DEFECT DET
RETURN
SYSTEM
CAM TITLE
MONITOR
VIDEO.OUT
LANGUAGE
RETURN
AF
AF MODE
ONE SHOT AF
TDN AF
LENS INIT
RETURN
EXIT
SAVE&END
RESET
NOT SAVE