Eneo GLC-1601 User manual

1
Installation and Operating Manual
1/3” Day/Night Network Colour Camera, integr. Web Server
GLC-1601

2
Contents
1. Safety Instructions..............................................................................................................................................3
2. Product Features ................................................................................................................................................4
2.1 Product Introduction ...........................................................................................................................................4
2.2 General Description ............................................................................................................................................4
3. Description of the Front/Rear View......................................................................................................................5
3.1 Front Panel and Rear Panel.................................................................................................................................5
3.2 Flank Panel ........................................................................................................................................................6
3.3 The USB Function...............................................................................................................................................7
3.4 PoE (Power over Ethernet) ..................................................................................................................................8
4. Installation..........................................................................................................................................................9
4.1 Connecting with an NVR .....................................................................................................................................9
4.2 Connecting with a DVR .....................................................................................................................................10
4.3 Connecting with a Multiplexer ..........................................................................................................................10
4.4 Updating System Software ...............................................................................................................................11
4.5 IP camera SD Card Troubleshooting .................................................................................................................12
4.6. Adjustment of Lenses.......................................................................................................................................13
5. Network Configuration......................................................................................................................................14
5.1 Cable Connections............................................................................................................................................14
5.2 Configure your IP camera Network Settings......................................................................................................16
5.3 TCP/IP Communication Software ......................................................................................................................17
5.4 TCP/IP Installation ............................................................................................................................................18
5.5 TCP/IP Configuration Setting.............................................................................................................................19
5.6 Connection Testing ...........................................................................................................................................20
6. Operating Instructions for Image Software and Network ...................................................................................22
6.1 Microsoft Internet Explorer................................................................................................................................23
6.2 The IP camera eneo GL-Manager .....................................................................................................................56
7. Advanced Operation .........................................................................................................................................78
8. Specifications...................................................................................................................................................81
9. Function of Client PC ........................................................................................................................................83
10. Dimensional Drawings......................................................................................................................................83
APPENDIX 1 - SCAN IP ..............................................................................................................................................84
APPENDIX 2 - IP Camera UPnP..................................................................................................................................87
APPENDIX 3 - The ARP Function................................................................................................................................98
APPENDIX 4 - Register as a DDNS Member...............................................................................................................99
APPENDIX 5 - MPEG4 Bit Rate Lookup Table of IP Camera ......................................................................................103
APPENDIX 6 - FAQ...................................................................................................................................................104

3
1. Safety Instructions
• Read these safety instructions and the operation manual first before you install and commission the camera.
• Keep the manual in a safe place for later reference.
• Protect your camera from contamination with water and humidity to prevent it from permanent damage.
Never switch the camera on when it gets wet. Have it checked at an authorized service center in this case.
• Never operate the camera outside of the specifications as this may prevent the camera functioning.
• Do not operate the cameras beyond their specified temperature, humidity or power ratings.
Operate the camera only at a temperature range of +5°C to +40°C and at a humidity of max. 80%.
• To disconnect the power cord of the unit, pull it out by the plug. Never pull the cord itself.
• Pay attention when laying the connection cable and observe that the cable is not subject to heavy loads, kinks, or
damage and no moisture can get in.
• Never point the camera towards the sun with the lens open as this may prevent the sensor functioning.
• Do not block ventilation openings.
• The installer is responsible for maintaining the protection class.
• Only use rust-proof screws should be used to mount the housing and camera outside.
• Do not place anything on top of the unit that might spill or fall into it.
• The warranty becomes void if repairs are undertaken by unauthorized persons. Do not open the camera housing.
• Maintenance and repair have to be carried out only by authorized service centers.
Before opening the cover disconnect the unit from mains input.
• Only use original parts and original accessories from Videor E. Hartig GmbH.
• Do not use strong or abrasive detergents when cleaning the dome. Use a dry cloth to clean the dome surface.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
NOTE: This is a class A digital device. This digital device can cause harmful interference in a residential
area; in this case the user may be required to take appropriate corrective action at his/her own
expense.

4
2. Product Features
2.1 Product Introduction
This user-friendly device combines cutting-edge sophistication with practical reliability and convenience, high perfor-
mance with smooth remote communication. Just plug in the network cable ! You’ll get live streaming Video & Audio
anytime any place ! You’ll have security you can rely on ! The especially high resolution has 520 TV lines, a built-in
web server and a Network interface to connect you with the Internet securely and fast.
Other special features include the masking of personal private images with flexible mask-area positioning and size,
the self-downloading automatic video codec and other components, and the whole unit is very easy to set up. You can
access the network to get smooth images through the real-time and synchronized audio / visual stream provided by
the device, because it supports two compression modes, the MJPEG and the MPEG4 - you can change from one to
the other as you wish. The MPEG4 file format is a very small size file, so it can save more images over a longer time
and can be set extremely fast. The device also has a built-in website server providing many Internet functions and
protocols, including the MDIX protocol which recognizes both the normal and the crossover cables, either of which
can connect up with a IP camera.
We hope this device makes it easier for you to get your IP address information. This unit supports the USB interface
which helps you to very easily get an IP address to open the IE browser: Just type in your IP address to the browser
and you can access your IP camera.
The device can hopefully provide the advanced motion detection function to improve your network surveillance with
both the powerful and enhanced multi-zone and multi-sensitivity modes of detection. We believe this unit is the right
answer to all your network surveillance problems. Try it and you’ll see.
NOTE: Our camera already has a built-in refocus for its Day and Night function. So users don’t need to
have an IR lens in this camera, they can just use a normal lens. If an IR lens is used, the focus will
become blurred.
2.2 General Description
• High Resolution Day&Night (Super HAD CCD)
• Horizontal Resolution of 480 TV Lines (colour)
• Removable IR Cut Filter
• MJPEG and MPEG-4 Video Compression
• Simultaneous Video and Audio Signal Transmission
• E-Mail and FTP Transmission of Important Events
• Integrated Activity Detection
• Ethernet Interface: 10/100Base-TX
• Supports Various Network Environments
• Alarm In/Output, Audio Output
• Upgrade via SD Card, USB Interface and Network
• SD Socket for Local Video Storage by SD Cards

5
3. Description of the Front/Rear View
3.1 Front Panel and Rear Panel
Front Panel Rear Panel
1. Microphone
The IP camera has an additional audio function. The device has a microphone built into its front panel which
records sound.
2. Plug Inlet
A 12VDC inlet that connects to an external power supply.
3. ETHERNET (PoE)
This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks.
PoE (Power over Ethernet) function: Provides power to the device via the same cable as used for the network
connection.
4 AUDIO OUT Connector:
The connector provides the unit’s audio signal to a speaker.
5. VIDEO OUT Connector
The connector provides the unit’s composite video signals to a monitor.
6 POWER indicator
Indicates the power status of the unit. The green light indicates the unit is activating.
The red light indicates the power is on and the SD card cannot be removed.
7 LAN indicator
Indicates the LAN status of the unit. The green light indicates the 100 Mbps Ethernet network is activating.
The red light signals the LAN is data linking.
8 SD CARD slot
This is used for system software updating and archiving / accessing critical images.

6
1. Lens Mount: This IP camera is used with either C or CS mount lens.
2. DIP Switch:
1. AES: Auto electric shutter
2. DC IRIS: Use auto iris (DC drive)
3. DHCP: Turn On / Turn Off use DHCP protocol. If the switch points upwards, the device can
change the setup of network function (enable/disable) via the network.
4. STATIC IP: If the switch points down, the device can’t obtain an IP address from the DHCP
server. This option is needed to configure the network communication settings.
3.2 Flank Panel
Right Flank Panel Left Flank Panel
3. ALARM I/O: This is a 6-PIN connector including the ALARM IN/OUT, ALARM RESET and GROUND items for
connecting with external devices.
• RS-485 pin: D+
• RS-485 pin: D-
• GND: Ground Contact
• ALARM IN (INPUT): This is an alarm input which can be programmed in the menu system to
Normally Open or Normally Closed. ( 5V
0V(Active) )
• ALARM OUT (OUTPUT): This is an alarm-output trigger. Connect this to external devices such as buzzers or
lights. ( 5V
0V(Active) )
• ALARM RST (RESET): This pin connects to an alarm-clear device for clearing an alarm. ( 5V
0V(Active) )
4. RESET: Recover to factory default.
5. 5 pin MINI USB Port: The user can use a USB device cable to connect the IP camera to the USB port on the PC.
6. ALC VR: Iris control VR
When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting environments.
Adjust the VR clock-wise to open the iris and counter-clockwise to close the iris of the camera.
7. IRIS: Auto iris connector
This camera works with a DC drive auto iris lens. Please refer to the pin assignment marked on the camera
when connecting the auto iris lens.

7
3.3 The USB Function
By connecting the IP camera with a PC via the USB connector, the IP camera can provide two different functions.
1. Insert an SD card: As a card reader
Insert an SD card into the IP camera, then connect to the PC. You might transfer files between the SD card
and the PC. Once you’ve connected your IP camera to your computer, the Windows system will detect the
connection and ask you what you want to do with your SD card.
In another words, if the user connects the IP camera with an SD card and the PC via the USB connector, the
IP camera can be used as a normal card reader.
2. Remove an SD card: As a configuring tool
Before using the USB configuration setting page, please remember to remove the SD card or your PC will read
the SD card and won’t show this window.
Network
Setting
PPPoE
Setting
DHCP ON DHCP OFF
WARNING: After changing the settings, please click the „Apply” button. All of the options will be effective
after removing the USB connector.

8
3.4 PoE (Power over Ethernet)
These technologies will enable the development of new networked appliances, by providing power as well as data
over existing Ethernet cables.
The Summary Comparison of PoE Standards (Table 1) is listed as follows.
Connect to a PoE HUB
The Standard RJ-45 PIN configuration for connecting with a PoE HUB is shown below.
Table 1. Summary Comparison of PoE Standards
STANDARD
SOURCE LOAD
REMARKS
Source
Voltage
Ethernet RJ-45 connector pin number *
12345678Load
Voltage
DC Load
Connec-
tor
IEEE
802.3af
using data
pairs
48VDC,
protected
RX,
DC+
RX,
DC+
TX,
DC- spare spare TX, DC- spare spare (embedded) Industry Standard for embedded PoE
IEEE
802.3af
using spare
pairs
48VDC,
protected RX RX TX DC+ DC+ TX DC- DC- (embedded) Industry Standard for embedded PoE
The compatible PoE Hubs (Table 2), which can be used with the unit, are shown in the tables below.
Table 2. Compatible PoE HUB
Manufacturer Model Port Note
PLANET FSP-804P 4 Port PoE HUB
POE-151 1 Port PoE HUB
D-Link DWL-P200 1 Port PoE HUB

9
4. Installation
Please follow the instructions and the diagram below to set up the system.
NOTE: The IP camera is linked by its Video Out connection via a BNC connector to a monitor’s Video In
connection. If this connection is there, you can see some information on the monitor screen, such as
the IP camera factory default Static IP address (192.168.1.168). But the IP camera Static IP
address can only appear if there is a connection between the IP camera and another device.
If there is no such connection, the IP camera factory default Static IP address will not appear on
the monitor screen.
4.1 Connecting with an NVR
Use a crossover LAN cable to connect directly to an NVR.
CONNECT TO ETHERNET
RJ-45 CONNECTOR
CONNECT TO
NVR ETHERNET PORT

10
CONNECT TO VIDEO OUT
BNC CONNECTOR
CONNECT TO DVR VIDEO IN
4.2 Connecting with a DVR
TO LAN Camera VIDEO OUT
BNC CONNECTOR
IP camera 1
IP camera 2
IP camera 16
4.3 Connecting with a Multiplexer