Eneo NXD-2012PTZ1080 B Installation instructions

Full Manual
Minitrax
1/2.8" Day/Night Dome Camera, PTZ
NXD-2012PTZ1080

2
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
PRECAUTIONS
Safety ---------------------------------- Installation -----------------------------
Cleaning ----------------------------------
CAUTION
RISK OF ELECTRNIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by the qualified
personnel before operating it any further.
Unplug the unit from the wall outlet if it is not going to
be used for several days or more. To disconnect the
cord, pull it out by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials(curtains, draperies)
that may block the ventilation holes.
Do not install the unit in an extremely hot or humid place
or in a place subject to excessive dust, mechanical
vibration.
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong
solvents such as thinner or benzene as they might
damage the finish of the unit.
Retain the original carton and packing materials for safe
transport of this unit in the future.

3
FCC COMPLIANCE STATEMENT
CE COMPLIANCE STATEMENT
FCC INFORMATION:
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS
EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH
CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION:CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME NMB-003 DU
CANADA.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufactu
rer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A po
larized plug has two blades with one wider than the other. A grounding type pl
ug has two blades and a third grounding prong. The wide blade or the third p
rong is provided for your safety. If the provided plug does not fit into your outl
et, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specifi
ed by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus co
mbination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unuse
d for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER TH
AN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS
YOU ARE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class
2 power source only.
17. ITE is to be connected only to PoE networks without routing to the outside pl
ant.

5
TABLE OF CONTENTS
DESCRIPTION ................................................................................................................................................ 7
MODELS............................................................................................................................................................ 7
KEY FEATURES .................................................................................................................................................. 7
COMPONENTS.................................................................................................................................................... 9
INSTALLATION............................................................................................................................................ 10
Locking Dome Camera .....................................................................................................14
Heater Kit Installation............................................................................................................................. 14
Basic Configuration of Dome Camera System.................................................................................... 14
Setting Network Dome Camera Adress (ID)....................................................................................... 14
Setting Network Dome Camera Protocol............................................................................................. 14
Connections.............................................................................................................................................. 14
IP Assignment.......................................................................................................................................... 14
OPERATION................................................................................................................................................... 17
MINIMUM CONDITIONS FOR USING WEB BROWSER........................................................................................... 17
ACCESSING THE IP CAMERA............................................................................................................................. 17
MAIN MENU .................................................................................................................................................... 17
LIVE VIEW..................................................................................................................................................... 19
LIVE VIDEO PAGE ICONS................................................................................................................................. 19
SETUP.............................................................................................................................................................. 21
BASIC CONFIGURATION................................................................................................................................... 22
Users ......................................................................................................................................................... 23
Network .................................................................................................................................................... 26
Vidoe & Image......................................................................................................................................... 27
Audio......................................................................................................................................................... 31
Date & Time............................................................................................................................................. 33
VIDEO &IMAGE .............................................................................................................................................. 35
Image – Basic.......................................................................................................................................... 36
Image – Image........................................................................................................................................ 40
Image – Auto Exposure.......................................................................................................................... 42
Image – Day & Night.............................................................................................................................. 42
Image – Auto Focus................................................................................................................................ 44
Image – White Balance.......................................................................................................................... 47
Video & Image – DIS.............................................................................................................................. 47
Webcasting............................................................................................................................................... 50
AUDIO............................................................................................................................................................. 51
Basic.......................................................................................................................................................... 51
EVENT............................................................................................................................................................. 53
Event In – On Boot................................................................................................................................. 53
Event In – Alarm In ................................................................................................................................ 53
Event In – Manual Trigger..................................................................................................................... 55

6
Event In – Motion.................................................................................................................................... 56
Event In – Network Loss........................................................................................................................ 58
Event In – Tampering............................................................................................................................. 59
Event Out – SMTP (Email)..................................................................................................................... 60
Event Out – FTP & JPEG........................................................................................................................ 61
Event Out – HTTP Server....................................................................................................................... 64
Event Out – Alarm Out........................................................................................................................... 66
Event Out – Audio Alert.......................................................................................................................... 67
Event Out – Event Notification.............................................................................................................. 69
Event Out – Boost................................................................................................................................... 70
Event Map................................................................................................................................................. 70
Event Map - Add...................................................................................................................................... 71
DOME CONFIGURATION................................................................................................................................... 73
Preset........................................................................................................................................................ 73
Tour........................................................................................................................................................... 75
Motor Setup.............................................................................................................................................. 77
RS485........................................................................................................................................................ 77
View Angle................................................................................................................................................ 80
System Menu ........................................................................................................................................... 80
Privacy Zone............................................................................................................................................. 82
SYSTEM........................................................................................................................................................... 82
Information .............................................................................................................................................. 83
Security - Users ....................................................................................................................................... 83
Security - HTTPS..................................................................................................................................... 85
Security – IP Filtering............................................................................................................................. 88
Date & Time............................................................................................................................................. 90
NETWORK ....................................................................................................................................................... 92
Network - Basic ....................................................................................................................................... 92
Network – DDNS ..................................................................................................................................... 95
Network – RTP......................................................................................................................................... 97
Network – UPnP....................................................................................................................................... 99
Network – QoS....................................................................................................................................... 100
Network – NAT(Port Mapping)............................................................................................................ 100
Network – Zeroconf.............................................................................................................................. 100
Network – Bonjour................................................................................................................................ 100
Language................................................................................................................................................ 107
Maintenance........................................................................................................................................... 108
Support................................................................................................................................................... 110
ABOUT .......................................................................................................................................................... 111
TECHNICAL SPECIFICATIONS.............................................................................................................. 112
TROUBLESHOOTING................................................................................................................................ 114

7
DESCRIPTION
-------------------------------------------------------------------------------------------------------------------------------------
The camera is an internet protocol based full-HD 60/50fps Mini-PTZ network camera with a built-in
web based viewer on Internet Explorer®. The camera has a connection feature for third-party
applications and compatible with supplied Utility software for easy installation and Client software to
search, configure, manage, live view, record and playback.
The camera supports dual compression formats and multiple streaming simultaneously. The two
standard compression formats include H.264 and MJPEG. The multiple streams can be configured to
a variety of resolutions, bit rates and frame rates.
The camera uses 1/2.8 inch CMOS sensor and Focal length 5.32mm ~ 62.61mm lens and supports
PoE (Power over Ethernet), DC12V, and AC24V.
Models
NXD-2012PTZ1080 Full-HD 60/50fps Mini-PTZ Network Camera
Key Features
HDTV Video Quality
The camera is capable of providing the outstanding image quality with HDTV performance and
profiles (High, Main, and Baseline) in H.264 compression.
Full-HD 60/50fps
The maximum video frame rate is 60/50fps, which enable capturing fast motion.
Multiple Streaming
Each stream can be programmed independently and transmitted using different configurations.
Dual Codec (H.264, MJPEG)
The camera supports two standard compressions formats H.264 and MJPEG.
Built-in optical Zoom
Support maximum 12x optical and 16x digital zoom. (Total 192x Zoom).
Intelligent Video Motion Detection
The camera offers intelligent & sophisticated video motion detection for each multiple streams.
Defog function
The camera offers defog function so that user can get clear image in haze condition.

8
Day and Night
The camera provides clear monitoring images even in low light conditions using IR-cut filter.
Voice Alert Linked to Alarm Detection
The HDS Series can play the audio file stored in the camera in synchronization with alarm detection
by the sensor input or the motion detection function.
Network Flow Control
The HDS Series provides a flow control function which enhances network efficiency by significantly
restricting user video streams with designating the maximum bandwidth.
ONVIF Certificate
The HDS Series network camera complies with the ONVIF certificate. ONVIF (Open Network Video
Interface Forum) is an open industry forum for the development of a global standard for the
interface of network video product.

9
Components
The dome camera is designed with compact, small size, hard dome camera housing. The housing is
constructed of aluminum, steel and plastic. The housing is designed to be mounted on a wall or a
ceiling. The housing meets the Protection Classification IP66 standards for dust and moisture
resistance.
* Dome Camera 1
* Installation Guide/CD 1
* Template Sheet 1
* Mounting Bracket 1
* Safety Lanyard 1
* Accessory Kit 1
1) Mounting screws (PH6 x 35.0) (4)
2) Plastic anchors (4)
3) O-Rings (4)
4) Torx wrench (1)
* Accessory Connector 1
1) 3-Pin Terminal Block (1)
2) 6-Pin Terminal Block (1)

10
INSTALLATION
-------------------------------------------------------------------------------------------------------------------------------------
The dome camera is for use in surface or pendent mounting applications, and the mounting member
must be capable of supporting loads of up to 1.6 kg. (Pendent mounting must use pendent mount
accessory.)
The dome camera’s mounting bracket should be attached to a structural object, such as hard wood,
wall stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
Locking Dome Camera
A. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).
B. Fix the Mounting Bracket to the ceiling using supplied Anchors (4x) and Mounting Screws (4x)
(Figure B).
C. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).
D. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).
E. Turn the dome to the counterclockwise about 10 degree to the locked position (Figure E).

11
CAUTION: Before installing mounting bracket to surface pre-adjust the four mounting
screws "A" on the base of the dome camera to best match the mounting bracket
locked position. Unscrew the locking screw on the side of the dome's base and fit
the tab of the mounting bracket into the locking slot. Screws "A" should not be
too tight or too loose when the dome is in the locked position. After setting the
proper positions of screws "A" remove the mounting bracket and install it to the
proper surface. If it is too difficult to lock the dome in position after the mounting
bracket has been installed readjust the screws "A" by unscrewing them a small
amount and try to install dome camera again.

12
Heater Kit Installation
1. Assemble the Heater board to two bossed with screws.
Take a reference "B" in the bottom case as below.
2. Place the Heater in the slot "A".
Heater cable should be placed away from the Main board.
3. Plug the power connector to the socket "C" (J1) of the Heater board.
4. 24VAC is recommended to use for the camera power for stable operation with heater kit.
• HEATER (IF APPLICABLE)
Power Supply
24VAC
Power Consumption
10W
Heater ON
at 59°F (15°C)
Heater OFF
at 77°F (25°C)
• POWER
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2
power source only.
CAUTION: Please reset the camera after 30 minutes when installing it in situations
colder than 0°C.

13
Basic Configuration of Dome Camera System
No. Wire Color Description
1 Red: 24VAC or 12VDC+
White: 24VAC or 12VDC- Main Power: 3-Pin terminal
2
Pink: GND
Gray: Alarm Input
Brown: GND
Yellow: Alarm Output
Green: RS485+
Blue: RS485-
Alarm Input/Output, RS485: 6-Pin terminal
3 Black
Ethernet, RJ-45 port compatible with
10/100Mbps having PoE functionality.
: Modular Jack
4 STEREO Gray Audio line output: STEREO Jack
5 STEREO Black Audio line input: STEREO Jack
The dome camera must be installed by qualified service personnel in accordance with all local and
federal electrical and building codes.

14
Setting Network Dome Camera Address (ID)
To prevent damage, each Network Dome Camera must have a unique address (ID). When
installing multiple Network Dome Cameras using a multiplexer, it is suggested that the Network
Dome Camera address match the multiplexer port number. The factory default setting is 1.
If you want to set the address more than 999, you should contact the service provider.
Refer to ‘Dome Configuration - RS485’ section for detailed information.
Setting Network Dome Camera Protocol
If a Network Dome Camera is to be installed with a Fastrax keyboard controller, select the default
protocol. Consult service personnel if a Network Dome Camera is installed with device other than a
keyboard controller.
Refer to ‘Dome Configuration - RS485’ section for detailed information.
Connections
Connecting to the RS485
The Network Dome Camera can be controlled remotely by an external device or control
system, such as a control keyboard, using RS485 half-duplex serial communications signals.
Connecting Alarms
-
AI (Alarm Input)
You can use external devices to signal the dome camera to react on events. Mechanical or
electrical switches can be wired to the AI (Alarm Input) and G (Ground) connectors.
-
G (Ground)
NOTE: All the connectors marked G or GND are common.
Connect the ground side of the alarm input and/or alarm output to the G (Ground)
connector.
-
AO (Alarm Output)
The dome camera can activate external devices such as buzzers or lights. Connect the
device to the AO (Alarm Output) and G (Ground) connectors.
Connecting the Network
The Network Dome Camera supports the operation through the network. Therefore, it is
necessary to connect a standard RJ-45 cable to it. Generally a cross cable is used for directly
connection to PC, while a direct cable is used for connection to a hub.
Connecting the Power
Connect power of 24VAC or 12VDC 1A for the dome camera.
When using a 12VDC adapter, connect the positive (+) pole to the ‘+’ position and
the negative (-) pole to the ‘-’ position.
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source
only.

15
IP Assignment
The eneo scanning device tool is used to locate all eneo network cameras in a local network. The
tool does not need to be installed with a setup program. The program exe-file can be started directly
from the CD with a simple double click to use the program.
After pushing the button „Find eneo devices“ you will get a list of cameras connected to the local
network. Highlight your camera in the list and open a context menu with a click of the right mouse
button.

16
Select the „Editing the camera IP address“ option to open a window for setting the cameras IP
properties. When you are done click the „Activate“ button to update the camera settings.
For further information, please refer to the eneo Scan Device Tool Quick Start Guide.

17
OPERATION
-------------------------------------------------------------------------------------------------------------------------------------
Before starting the camera, installation must be complete. The camera completes a configuration
sequence within approximately 40 seconds when power is supplied. The amber LED of this
megapixel camera flash one time per second indicating the configuration sequence is complete.
NOTES
- If the DHCP is enabled but the camera is not connected to a DHCP server, the camera will be set
default IP 192.168.1.10 and try to get IP from DHCP server about every two seconds.
- Network and processor bandwidth limitations might cause the video stream to pause or appear
pixilated when an increased number of Web-interface users connection to the camera. Decrease
the images per second, resolution, compression, or bit rate settings of the Web-interface video
streams to compensate for network or processor limitations.
Minimum conditions for using web browser
The minimum system requirements to use a Web browser with this IP camera are as follows:
- CPU: Pentium®4 microprocessor, 2.0GHz
- Operational System: Windows XP®or Windows Vista®or Windows 7®
- System Memory: RAM 512 Mbyte
- Ethernet: 100 Mbit
- Video Resolution: 1024(Horizontal) x 768(Vertical) pixels or higher
- Internet Explorer®7 or later
- ActiveX®1.0.0.13 or later
Accessing the IP camera
1. Open Web browser
- Double click Internet Explorer®icon.
2. Type IP address
- Type the camera’s IP address in the Internet Explorer®address bar.
- The default IP address is
192.168.1.10
3. Log On to the camera
- Click the Live View icon for default live image view or the Setup icon to change the configuration
values.
Main Menu

18
The dialog box will be appears.
- Type User ID and Password in the dialog box. The default User ID and Password are
admin
.
NOTE
For security purposes, be sure to change the password after you log on for the first time.

19
LIVE VIEW
-------------------------------------------------------------------------------------------------------------------------------------
The Live View page provides you to select the properties of video source. You can view the live
image from this page and also access the Setup menu and operate the main functions.
Live Video Page Icons
Hide Main Icons: Hides main icons in the live view page.
Show Main Icons: Shows main icons in the live view page.
Live view: Displays live video stream.
Setup: Enters setup menu.
Help: Shows helpful information.

20
Source: Specify the viewable video stream source to display in live view page.
View Size: Specify the viewable video size to display in live view page.
Stream Type: Specify the internet protocol to display in live view page.
Preset: Specify the specially selected area to transfer using different stream feature in the
primary video image. ROI is an abbreviation for “Region of Interest”.
Stop / Start: The Stop button stops the video stream being played. Pressing the key
again toggles the start and stop. The Start button connects to the network camera or starts playing
a video stream.
Pause: Pause the live video stream.
Snapshot: Take a picture of the video image currently on display. Supports the origin image
size view, Print, and Save feature.
Digital Zoom: Supports a digital zoom in live video image.
Full Screen: Expands video image to the entire screen area.
Manual Trigger: Activates the Alarm Out signaling manually.
PTZ Control: Activates PTZ Control Panel
Speaker: Adjusts the volume of Speaker and switch the sound on / off.
Microphone: Adjusts the volume of Microphone and switch the sound on / off.