Eneo PXD-2030PTZ1080 Installation instructions

Full Manual
1/2.8" Network Full HD Speed Dome,
PTZ, 30x, Day&Night
PXD-2030PTZ1080

1
Table of Contents
1. Overview................................................................................................................................2
1.1 Features......................................................................................................................2
1.2 Package Contents .......................................................................................................3
1.3 Dimensions..................................................................................................................4
1.4 Switch / Connector Definition.......................................................................................5
2. Camera Cabling.....................................................................................................................6
2.1 Connect Power............................................................................................................6
2.2 Connect Ethernet Cable...............................................................................................6
2.3 Apply Alarm I/O ...........................................................................................................7
2.4 Apply Audio .................................................................................................................7
3. System Requirements ..........................................................................................................8
4. Access Camera .....................................................................................................................9
5. Setup Video Resolution......................................................................................................11
Appendix A: Technical Specifications ......................................................................................12
Appendix B: Delete the Existing DC Viewer..............................................................................14
Appendix C: Setup Internet Security.........................................................................................15
Appendix D: Video Resolution...................................................................................................16
Quad Stream.........................................................................................................................16
Triple Stream ........................................................................................................................20
Dual Stream..........................................................................................................................22
Single Stream .......................................................................................................................22

2
1. Overview
The Full HD Ultra WDR Speed Dome IP Camera transmits digital video and
audio data using wire connection. Live video can be monitored and recorded
from window-based computer via network.
The video encoder supports Real-Time H.264 Full HD resolution. Simultaneous
Quad Codecs, H.264 Baseline / Main / High Profile, MJPEG, are available for
various network applications via speeding or limited bandwidth. Better image
quality and high resolution are delivered by IP support. It eliminates the
“combing” effect due to scene change and performs more stabilized image.
With IP solution, multiple and authorized users can view the immediate image
from any location through network even using a standard web-browser.
It enables users to access and remote the camera without at specific locations.
1.1 Features
Sony Progressive Scan CMOS Sensor
18x / 20x / 30x Optical Zoom
12x Digital Zoom
Ultra Wide Dynamic Range (>96dB)
Dual Streams, Full HD 1080P Real-Time + D1 Real-Time
Noise Reduction
Electronic Image Stabilizer
IP66 International
ONVIF Support

3
1.2 Package Contents
The package should contain the items listed below. If any item is missing or has
defects, contact the dealer for assistance.
Dome Camera with
Outdoor Mount Kit
M3 Standard Screw (x1)
M3 Security Screw (x1)*
M5 Standard Screw (x1)
M5 Security Screw (x1)*
Waterproof Rubber
Quick Guide
CD: Operation Manuals
Optical Cover
Lubricant
Security Torx*
*Optional: For Vandal Proof Cover only.

4
1.3 Dimensions

5
1.4 Switch / Connector Definition
Refer to the diagrams and the tables below for the use of each switch /
connector.
Outdoor
A RJ-45 Connector
B Alarm I/O
C Power
D microSD Card Slot
E Factory Reset Button
F Audio I/O

6
2. Camera Cabling
Follow the instructions below to complete IP Camera connection.
2.1 Connect Power
Refer to the illustration and the pin definition table below to connect the power
core through the supplied power adaptor to the camera.
2.2 Connect Ethernet Cable
Use of Category 5 Ethernet Cable is recommended for network connection;
to have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet Cable to the camera’s RJ-45 connector,
and plug the other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet Crossover Cable might be needed
when connecting the camera to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are
unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
Pin Definition
1 AC 24_1
2 FG
3 AC 24_2

7
2.3 Apply Alarm I/O
The camera supports 4 digital alarm inputs and 2 digital alarm outputs.
Please refer to the illustration and the pin definition table below for alarm system
wiring.
Pin Definition Pin Definition
1 ALARM_OUT_NO_1 7 ALARM_OUT_COM_2
2 ALARM_OUT_NC_1 8 GND
3 ALARM_OUT_COM_1 9 ALARM_IN_4
4 GND 10 ALARM_IN_3
5 ALARM_OUT_NO_2 11 ALARM_IN_2
6 ALARM_OUT_NC_2 12 ALARM_IN_1
2.4 Apply Audio
Please refer to the illustration and the pin definition table below for audio
connection.
Pin Definition
1 LINE_OUT
2 GND
3 LINE_IN

8
3. System Requirements
To perform the IP Camera via web browser, please ensure the PC is in good
network connection, and meet the system requirement as described below.
Items Minimum Requirement
Personal Computer
1. Intel® Pentium® IV, 3 GHz or higher, Intel® Core2 Duo,
2 GHz or higher
2. 1 GB RAM or more
3. AGP graphics card 64 MB RAM, DirectDraw
Operating System Windows VISTA / Windows XP / Windows 7
Web Browser Internet Explorer 6.0 or later, Firefox, Chrome, Safari
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE

9
4. Access Camera
The network Speed Dome Camera’s default IP address is: 192.168.1.10.
Therefore, to access the camera for the first time, set the PC’s IP address as:
192.168.1.XXX; for example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
Login ID & Password
•Key in the camera’s IP address in the URL bar of the Web browser window and
press “Enter.”
•Enter the default user name (admin) and password (admin) in the prompt
request dialogue.
Note that user name is case sensitive.
Installing DC Viewer Software Online
For the initial access to the camera, a client program, DC Viewer, will be
automatically installed to the PC when connecting to the camera.
If the Web browser doesn’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
chapter Appendix C: Setup Internet Security) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control…> to allow
the installation. Asecurity warning window will pop up. Click on <Install> to carry
on software installation.