ENER-J IH1003 User manual

SKU Code: IH1040
Wireless Multi- program thermostat timer.
Wireless Frequency
Voltage Choice
Maximum Range
Convenient Remote ON/OFF Socket Control
Button. Location by Location Switching.
Temperature Accuracy
Battery
Model No
Plug/Socket Type
433.92MHz
230V/50Hz, 120V/60Hz.
20 meters in open area.
± 1 °C or ± 1 °F
2pcs x 1.5AA Battery
OPS200+OTS200.
UK
Technical Specifications:
Big LCD with white/green Backlight selectable.
Display clock and Daylight Saving Time (DST) switchable.
Cooling and Heating mode switchable
Automatically turn on/off plug-in heating or cooling device as
ambient temperature changes, to save the electricity bills.
Back Up Battery with low battery warnings.
Features
RF Thermostat for
Infrared heating
panel
Works with our SKU Code
IH1003, IH1004 and IH1007 only
Daylight
Saving Time
Cool Mode Heat Mode Battery Low
Warning

EAN : 5060774551950
SKU : IH1040
Pair to socket :
STEP 1
Press and hold the - and
+ button for 3 secs to
activate the remote
control pairing mode,
The icon CONNECT
flashes to indicate that
the pairing mode has
started
STEP 2
Press and hold the
receiver button for 3 secs,
the red LED flasher,
indicating socket is in
pairing mode.
STEP 3
When the red LED on
stops flashing, the icon
CONNECT
on remote stays on
indicating pairing is
complete
6
Stuck? Confused?
Contact our Technical Support team on:
T: [phone] E: [email protected]
Lines are open Mon - Fri (8am to 4pm)
Thank you for choosing ENER-J!
Customer satisfaction is our TOP priority, please let us know how you felt about your experience. Happy? We are so
happy that you are pleased with our product. Feel f ree to express your newfound joy! Share your experience by writing
a review.
Not Happy ? If you are not fully satisfied with the item you received, have any problems like damages, or questions,
please contact us. We typically respond within 24-48 hours.