Energenie EG-UPSO-6000 User manual

ONLINE UPS,
6000/
10000 VA, USB + SNMP
SLOT
ONLINE-UPS, 6000/10000 VA, USB + SNMP-
STECKPLATZ
ONLINE UPS, 6000/10000 VA, USB + SNMP
SLOT
UPSONLINE, 6000/10000 VA, RANURA USB
+ SNMP
UPS ONLINE, 6000/10000
VA, SLOT USB + SNMP
UPS ONLINE, 6000/10000 VA, USB + SLOT
SNMP
ONDULEUR UPS, 6000/10000 VA, PORT USB +
SNMP
ONLINE UPS, 6000/10000 VA, USB + SNMP
SLOT
ONLINE UPS, 6000/10000 VA, GNIAZDO US
B + S
ОНЛАЙН UPS, 6000/10000 ВА, USB + SNMP
СЛОТ
TIEŠSAISTES UPS, 6000/10000 VA, USB + SNMP
S
UPS ONLINE, 6000/10000 VA, SLOT USB +
SNM
EG
USER MANUAL
•
HANDBUCH
•
HANDLEIDING
•
MANUALE D'USO
MANUAL DE USUARIO•MANUAL DO USUÁRIO•
MANUEL DESCRIPTIF
INSTRUKCJAOBSŁUGI•UŽIVATELSKÝ MANUÁL •
ІНСТРУКЦІЯ
КОРИСТУВАЧА •POUŽÍVATEĽSKÁ PRÍRUČKA•
VARTOTOJO VADOVAS
•MANUAL DE UTILIZARE
EG
SLOT
STECKPLATZ
SLOT
+ SNMP
VA, SLOT USB + SNMP
SNMP
SNMP
SLOT
B + S
NMP
СЛОТ
SLOTS
NMP
EG-UPSO-6000
EG
-UPSO-10000
MANUALE D'USO
•
MANUEL DESCRIPTIF
•
ІНСТРУКЦІЯ
VARTOTOJO VADOVAS

- 2 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
Table of Contents
Important Safety Instructions…………………………
……………
1 Product Description……………………………………....
.....
1.1
Features………………………………………………………….……
1.2Models………………………………………
…………………………
1.3 Appearance………….………………………….…………
……..
1.4
System Description…………………………………………………...
1.5
UPS Working Mode.…………………………………………………
1.6
Product Specifications………………………………………………
2 Installation……………………………………
……….………………
2.1
Unpacking and Inspection……………………………………………
2.2
Connect Input/Output Power………………………………………...
2.3
Operating Procedure for Connecting the Long Backup Time Model UPS with
the External Battery……………………………
…………………………
2.4
Connect Parallel Cables…………………………………………….
2.5
Connect Communication Cables……………………………………
3 Controls and Indicators
…………………………………………………
4 Operation
……………………………………………….…………..…
4.1Operation Mode…………………………………………
…….………
4.2Parallel Operation
……………………………………………….……………
4.3Maintenance Bypass Operation Mode
………………………………………
5 Communication
………………………………………….………………
5.1RS232 and USBPort
……………………………………………….……………
5.2EPO Port
……………………………………………….………………
5.3Intelligent Cards (Optional)
……………………………………………….……
6 Maintenance
………………………………………….………………
6.1Battery Maintenance
……………………………………………….……………
6.2Battery Disposal
……………………………………………….………………
6.3Battery Replacement Procedures
……………………………………………
6.4Precaution
……………………………………………….………………
6.5Checking UPS Status
……………………………………………….…………
7 Troubleshooting
………………………………………….………………
Annex A Parallel Setting
………………………………………….……………
Annex B Mechanical Size
………………………………………….……………
Annex C Battery Run Time
…………………………………………………………
Software Download & Installation
………………………………………….………
GENERAL INFORMATION…………………………………………………
Important Safety Instructions
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
……………
……………..3
.....
...........................4
Features………………………………………………………….……
……………5
…………………………
……………5
……..
……………….5
System Description…………………………………………………...
.................7
UPS Working Mode.…………………………………………………
……………8
Product Specifications………………………………………………
…………...11
……….………………
…………..13
Unpacking and Inspection……………………………………………
…………13
Connect Input/Output Power………………………………………...
...............13
Operating Procedure for Connecting the Long Backup Time Model UPS with
…………………………
……...15
Connect Parallel Cables…………………………………………….
.................15
Connect Communication Cables……………………………………
………….16
…………………………………………………
..…….18
……………………………………………….…………..…
…………..25
…….………
.…………25
……………………………………………….……………
.…25
………………………………………
..25
………………………………………….………………
……….26
……………………………………………….……………
26
……………………………………………….………………
…………26
……………………………………………….……
.27
………………………………………….………………
…………...30
……………………………………………….……………
30
……………………………………………….………………
…30
……………………………………………
…31
……………………………………………….………………
………..31
……………………………………………….…………
...31
………………………………………….………………
……....32
………………………………………….……………
……36
………………………………………….……………
..…37
…………………………………………………………
40
………………………………………….………
40
GENERAL INFORMATION…………………………………………………
.…………..41

- 3 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
Save these instructions
This manual contains important safety instructions
. Read all safety and operating instructions before
operating the uninterruptible power systems (UPS). Adhere to all warnings on the unit and in this manual.
Follow all operating and user instructions. This equipment can be operated by individuals without
training.
This product designed for commercial/industrial use only. It is intended for use with lift support and other
designated “critical” devices. Maximum load must not exceed that shown on the UPS rating label. The UPS
is designed for data pro
cessing equipment. If uncertain, consult your dealer or local representative.
This UPS is designed for use on a properly grounded (earthed), 220/230/240V
factory default setting is 220Vac/50Hz. Installation instructions and warnin
g notices are in this manual.
The UPS 06 –20 kVA@220/230/240Vac is designed for use with a three-
wire input (L,N,G).
WARNING
The battery can present a risk of electrical shock and high short circuit current. Following
precautions should be observed before replacing the battery.
Wear rubber gloves and boots.
Remove rings, watches and other metal objects.
Use tools with insulated handles.
Do not lay tools or other metal objects on the batteries.
If the battery is damaged in any way or shows signs of leakage
, contact your local representative
immediately.
Do not dispose of batteries in a fire. The batteries may explode.

Handle, transport and recycle batteries in accordance with local representative.
WARNING
Although the UPS has been designed and manufactured
to ensure personal safety, improper use
can result in electrical shock or fire. To ensure safety, observe the following precautions:
Turn off and unplug the UPS before cleaning it.
Clean the UPS with a dry cloth. Do not use liquid or aerosol cleaners.
Nev
er block or insert any objects into the ventilation holes or other openings of the UPS.
Do not place the UPS power cord where it might be damaged
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
. Read all safety and operating instructions before
operating the uninterruptible power systems (UPS). Adhere to all warnings on the unit and in this manual.
Follow all operating and user instructions. This equipment can be operated by individuals without
previous
This product designed for commercial/industrial use only. It is intended for use with lift support and other
designated “critical” devices. Maximum load must not exceed that shown on the UPS rating label. The UPS
cessing equipment. If uncertain, consult your dealer or local representative.
This UPS is designed for use on a properly grounded (earthed), 220/230/240V
ac, 50 or 60Hz supply. The
g notices are in this manual.
wire input (L,N,G).
The battery can present a risk of electrical shock and high short circuit current. Following
, contact your local representative
Handle, transport and recycle batteries in accordance with local representative.
to ensure personal safety, improper use
can result in electrical shock or fire. To ensure safety, observe the following precautions:
er block or insert any objects into the ventilation holes or other openings of the UPS.

- 4 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
1 Product Description
Congratulations on your choice of the UPS uninterruptible power system(UPS), the U
power ratings of 6-20k
VA. It is designed to provide conditioned power to computers and other sensitive
electronic equipment.
This chapter gives a brief description of the UPS, including the UPS features, models, appearance,
operating principle and specification.
NOTICE
：
Operatedthe UPS in anindoorenviromentonly in anambienttemperaturerangeof 0
in a clean environment, free from moisture, flammable liquids, gases and corrosive substance.
This UPS contains no user-serviceable parts except the int
ernal battery pack. The UPS
buttons do not electrically isolate internal parts. Under no circumstance attempt to gain access internally,
due to the risk of electric shock or burn.
Do not continue to use the UPS if the panel indications are not in ac
cordance with these operating
instructions or the UPS performance alters in use. Refer all faults to your dealer.
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the
precautions. Keep unauthorized person
nel away from the batteries. Proper disposal of batteries is required.
Refer to your local laws and regulations for disposal requirement.
DO NOT CONNECT equipment that could overload the UPS or demand surge current from the UPS, for
example: electric drills, vacuum cleaners, hair dryer, motors and so on.
DO NOT CONNECT equipment that is life related, for example: medical equipment, elevator and so on.
Storing magnetic media on top of the UPS may result in data loss or corruption.
Turn off and isolate the UP
S before cleaning it. Use only a soft cloth, never liquid or aerosol cleaners.
1.1 Features
The UPS features include:
Providing more highly
efficient AC power, compared with the previous generation
Full digital control technology based on DSP to achieve high
reliability and power function

Fan speed can be auto conditioned according to the loads, input voltage or working mode

Digitally controlled charger current and voltage, compared with the previous generation which is fixed
in hardware
Super high-power density
1.2 Models
Available models are shown as Table1-1:
Table 1- 1: Models
Model Nominal Power Type
EG-UPSO-6000 6kVA/6kW Online UPS
EG-UPSO-10000 10kVA/10kW
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
Congratulations on your choice of the UPS uninterruptible power system(UPS), the U
PS comes in nominal
VA. It is designed to provide conditioned power to computers and other sensitive
This chapter gives a brief description of the UPS, including the UPS features, models, appearance,
Operatedthe UPS in anindoorenviromentonly in anambienttemperaturerangeof 0
-40°C(32-104°F). Install it
in a clean environment, free from moisture, flammable liquids, gases and corrosive substance.
ernal battery pack. The UPS
“ ”push
buttons do not electrically isolate internal parts. Under no circumstance attempt to gain access internally,
cordance with these operating
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the
nel away from the batteries. Proper disposal of batteries is required.
DO NOT CONNECT equipment that could overload the UPS or demand surge current from the UPS, for
DO NOT CONNECT equipment that is life related, for example: medical equipment, elevator and so on.
Storing magnetic media on top of the UPS may result in data loss or corruption.
S before cleaning it. Use only a soft cloth, never liquid or aerosol cleaners.
efficient AC power, compared with the previous generation
reliability and power function
Fan speed can be auto conditioned according to the loads, input voltage or working mode
Digitally controlled charger current and voltage, compared with the previous generation which is fixed

- 5 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
1.3Appearance
Fig 1- 1: Front View Fig 1- 2
: Rear View
As shown in Fig 1-2, the rear panel provides the following componen
ts and function
1
RS232: DB9 type, used to connect monitoring software
2
EPO: OFF
3
Parallel port: option
4
USB: B type, used to connect monitoring software
5
Battery temperature option
6
SNMP
7
Reserved: reserved for
customer function, such as manual bypass, battery breaker, socket and so on
8
Fans: intelligent fan speed control
9
Bypass breaker: surge proection
10
Input breaker: surge protection
11
GND
12
Terminal cover
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
: Rear View
ts and function
s:
customer function, such as manual bypass, battery breaker, socket and so on

- 6 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
1.4 System Description
TVS&RFI/
EMI filter PFC INV
CHG
Battery
STS
Input
SPS DSP
Fig 1- 3: UPS system
1.4.1
Transient Voltage Surge Suppression (TVSS) and EMI/FRI Filters
These UPS comp
onents provide surge protection and filter both electromagnetic interference (EMI) and
radio frequency interference (RFI). They minimize any surge or interference present in the utility line and
keep the sensitive equipment protected.
1.4.2 Rectifier/Power Factor Correction (PFC) Circuit
In normal operation, the rectifier/power factor correction (PFC) circuit converts utility AC power to regulated
DC power for use by the inverter while ensuring that the waveform of the input current used by the UPS is near
ideal. Extracting this sinewave input current achieves two objects:
The utility power is used as efficiency as possible by the UPS.
The amount of distortion reflected on the utility is reduced.
This results in cleaner power being available to other devices in t
he building not being protected by the
UPS.
1.4.3 Inverter
In normal operation, the inverter utilizes
the DC output of the power factor correction circuit and inverters it
into precise, regulated sinewave AC power. Upon a utility power failure, the inverter rece
energy from the battery through the DC-to-
DC converter. In both modes of operation, the UPS inverter is on
line and continuously generating clean, precise, regulated AC output power.
1.4.4 Battery Charger
The battery charger utilizes energy fro
m the DC bus and precisely regulates it to continuously charge the
batteries. The batteries are being charged whenever the UPS is connected to utility power.
1.4.5 DC to DC Converter
The DC to DC converter utilizes energy from the battery system and raises the D
operating voltage for the inverter. The converter includes boost circuit which is also used as PFC.
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
Output
Transient Voltage Surge Suppression (TVSS) and EMI/FRI Filters
onents provide surge protection and filter both electromagnetic interference (EMI) and
radio frequency interference (RFI). They minimize any surge or interference present in the utility line and
In normal operation, the rectifier/power factor correction (PFC) circuit converts utility AC power to regulated
DC power for use by the inverter while ensuring that the waveform of the input current used by the UPS is near
he building not being protected by the
the DC output of the power factor correction circuit and inverters it
into precise, regulated sinewave AC power. Upon a utility power failure, the inverter rece
ives its required
DC converter. In both modes of operation, the UPS inverter is on
-
m the DC bus and precisely regulates it to continuously charge the
batteries. The batteries are being charged whenever the UPS is connected to utility power.
The DC to DC converter utilizes energy from the battery system and raises the D
C voltage to the optimum
operating voltage for the inverter. The converter includes boost circuit which is also used as PFC.

- 7 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
1.4.6 Battery
The 6KS/10KS Standard includes
value regulated, sealed lead acid, maintenance free batteries inside. To
maintain battery design life, operate the UPS in an ambient temperature of 15-
25
1.4.7 Static Bypass
The UPS provides an alternate path for utility power to the connected load in the unlikely event of a UPS
malfunction. Should the UPS have an overload, over temperature or any o
ther failure condition, the UPS
automatically transfers the connected load to bypass. Bypass operation is indicated by an audible alarm and
illuminated amber Bypass LED. To manually transfer the connected load from the inverter to bypass, press
the “ + ” button once.
NOTICE:
The bypass power path does NOT protect the connected equipment from disturbances in the
utility supply.
1.5 UPS Working Mode
Normally UPS working mode include normal mode, bypass mode, battery mode, ECO mode, frequency
converter mode, self aging mode.
Normal Mode
Shown as Fig 1-
4, rectifier supply DC supply to inverter, the load is feed by inverter. Charger is charging
the battery.
TVS&RFI
EMI filter PFC INV
CHG
BAT
BYPASS
Input
Fig 1- 4: Normal Mode
Static Bypass Mode
If inverter is failure or overload, UPS will transfer to bypass mode. Or press “
bypass mode in normal mode. The load is feed by input power directly, and UPS
surge. Shown as Fig 1-5.
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
value regulated, sealed lead acid, maintenance free batteries inside. To
25
°C.
The UPS provides an alternate path for utility power to the connected load in the unlikely event of a UPS
ther failure condition, the UPS
automatically transfers the connected load to bypass. Bypass operation is indicated by an audible alarm and
illuminated amber Bypass LED. To manually transfer the connected load from the inverter to bypass, press
The bypass power path does NOT protect the connected equipment from disturbances in the
Normally UPS working mode include normal mode, bypass mode, battery mode, ECO mode, frequency
4, rectifier supply DC supply to inverter, the load is feed by inverter. Charger is charging
Ouput
+ ”to transfer to
bypass mode in normal mode. The load is feed by input power directly, and UPS
cannot protect load from

- 8 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
TVS&RFI
EMI filter PFC INV
CHG
BAT
BYPASS
Input
Fig 1- 5: Bypss Mode
Battery Mode
If input power is failure when in normal mode, UPS will transfer to battery mode. In this mode, the battery
provide power to inverter. Shown as Fig 1-6.
NOTICE: press“ + ”in battery mode will shutdown UPS completely.
TVS&RFI
EMI filter PFC INV
CHG
BAT
BYPASS
Input
Fig 1- 6: Battery Mode
ECO Mode (only available for single unit)
When UPS works in ECO mode, load is feed by bypass. Inverter is standby, charger is working normally.
The efficiency is up to 98%, but UPS can
protect the load from surge disturb. If input power is failure, UPS
transfer to battery mode. Shown as Fig 1-7.
TVS&RFI
EMI filter PFC INV
CHG
BAT
BYPASS
Input
Fig 1- 7: ECO Mode
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
Output
If input power is failure when in normal mode, UPS will transfer to battery mode. In this mode, the battery
Output
When UPS works in ECO mode, load is feed by bypass. Inverter is standby, charger is working normally.
protect the load from surge disturb. If input power is failure, UPS
Output

- 9 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
Frequency Converter Mode
In this mode, input and output nomi
nal frequency is different, and the bypass is forbidden to use.
NOTICE: if overload timeout, UPS will shutdown output.
NOTICE: the load should be derated to 50% and below.
Self Aging Mode
If users want to burn in UPS without load, could set the UPS as Self
Aging Mode, in this mode, the current
flow through rectifier, inverter, and back to input through bypass. It needs only 5% loss to burn in UPS with
100% load. Shown as Fig 1-8.
TVS&RFI
EMI filter PFC INV
CHG
BAT
BYPASS
Input
Fig 1- 8: Self Aging Mode
1.6 Product Specifications
Model 6KVA
Power Rating
PF=1, kVA=kW
Frequency (Hz) 50/60
Input Voltage (176-288)Vac
Current Max. 36A
Max. 60A
Battery Voltage 192Vdc
Current Max. 40A
Max. 67 A
Output Voltage
220(default) /230/240Vac
Current 27 A
Efficiency Max. 94.5%
Max. 95%
Dimension (WxDxH)
(mm)
310 x 685 x 941
310 x 685 x 941
Weight (kg) 53
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
nal frequency is different, and the bypass is forbidden to use.
Aging Mode, in this mode, the current
flow through rectifier, inverter, and back to input through bypass. It needs only 5% loss to burn in UPS with
Output
10KVA
PF=1, kVA=kW
Max. 60A
Max. 67 A
220(default) /230/240Vac
45.5A
Max. 95%
310 x 685 x 941
62

- 10 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
2 Installation
The system should
be installed and wired only by qualified electricians in accordance with applicable
safety regulations.
NOTICE
：
UPS operation in sustained temperature outside the range of 15-
25
battery life.
2.1 Unpacking and Inspection
1.
Unpack the packaging and check the package contents. The shipping package contains:
1 UPS
1 user manual
2. Inspect the ap
pearance of the UPS to see if there is any damageduring transportation. Do not turnon the unit
and notify the carrier and dealer immediately if there is any damage or lacking of some parts.
2.2 Connect Input/Output Power
1.Notes for installation
(1) The UPS must be installed in a location with good ventilation
, far away from water, inflammable gas
and corrosive agents.
(2)
Ensure the air vents on the front and rear of the UPS are not blocked. Allow at least 0.5m of space on
each side.
(3) Condensation to water
drops may occur if the UPS is unpacked in a very low temperature environment.
In this case it is necessary to wait until the UPS is fully dried inside out before proceeding installation and
use. Otherwise there are hazards of electric shock.
(4)The circuit
breaker (CB) with residual current device (RCD) should not be used in the input of
2. Installation
Installation and wiring must be performed in accordance with the local electric code and the following
instructions by professional personnel.
For safety, please cut off the mains power switch before installation. Open t
he battery breaker
backup time model (“H” model).
(1)
Open the terminal block cover located on the rear panel of the UPS, please refer to the appearance
diagram.
(2)For 6/10kVA UPS, it is recommended to select the UL1015 10/8 AWG(
6/10
insulated wire which complies with AWG Standard for the UPS input and output wirings.
NOTICE
：
Do not use the wall receptacle as the input power source for the UPS, as its rated current is
less than the UPS’s maximum input current. Otherwise the receptacle may be burned and destroyed.
the long backup time modes, make sure that the capacity of b
atteries is larger than 24A
charging. If not, please confirm the charge current and set the charge current according to battery capacity.
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
be installed and wired only by qualified electricians in accordance with applicable
25
°C (59-77°F) reduces
Unpack the packaging and check the package contents. The shipping package contains:
pearance of the UPS to see if there is any damageduring transportation. Do not turnon the unit
and notify the carrier and dealer immediately if there is any damage or lacking of some parts.
, far away from water, inflammable gas
Ensure the air vents on the front and rear of the UPS are not blocked. Allow at least 0.5m of space on
drops may occur if the UPS is unpacked in a very low temperature environment.
In this case it is necessary to wait until the UPS is fully dried inside out before proceeding installation and
breaker (CB) with residual current device (RCD) should not be used in the input of
UPS.
Installation and wiring must be performed in accordance with the local electric code and the following
he battery breaker
for long
Open the terminal block cover located on the rear panel of the UPS, please refer to the appearance
6/10
mm
2
) wire or other
insulated wire which complies with AWG Standard for the UPS input and output wirings.
Do not use the wall receptacle as the input power source for the UPS, as its rated current is
less than the UPS’s maximum input current. Otherwise the receptacle may be burned and destroyed.
For
atteries is larger than 24A
h to avoid over
charging. If not, please confirm the charge current and set the charge current according to battery capacity.

- 11 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
BAT+Out_LOut_NIN_NIN_LPE
6/10kH/S
Fig 2- 1: Terminal Block Wiring Diagram
NOTICE
：
M
ake sure that the input and output wires and the input and output terminals are connected
tightly.
(4)Connect the input, output and battery wires to the terminals as Fig2-1.
(5)The protective earth ground wire refers to the wire connection
between the eq
electric equipment and the ground wire. The wire diameter of protective earth
ground wire should be at least
as above mentioned for each model and green wire or green wire with yellow ribbon wire is used.
(6)After having completed the installation, make sure the wiring connection
iscorrect.
(7) Please install the output breaker between the output terminal and the load.
(8)
To connect the load with the UPS, please turn off all the loads first, then perform the connection and
finally turn on the loads one by one.
(9)
No matter the UPS is connected to the utility power or not, the output of the UPS may have electricity.
The parts inside the unit may still have hazardous voltage after turning off the UPS. To make the UPS have
no output, power off the UPS, and then disconnect the utility power supply.
(10)
Suggest charging the batteries for 8 hours before use. After connection, turn the input breaker in the
“ON” position, the UPS will charge the batteries automatically. You can also use the
without charging the batteries first, but the backup time may be less than the standard value.
(11) If it is necessary to connect the inductive load such as a motor
or a laser printer to the UPS, the start
up power should be used for calculating the capacity of the UPS, as its start-
up power consumption is too
big when it is started.
2.3 Connect Parallel Cables
1. Brief introduction
As long as the UPS is equipped with parallel cables, up to 4
UPS can be connected in parallel to realize
output power sharing and power redundancy.
The unit ID in paralleled system must be set to be different.
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
BAT-
ake sure that the input and output wires and the input and output terminals are connected
between the eq
uipment which consumes
ground wire should be at least
as above mentioned for each model and green wire or green wire with yellow ribbon wire is used.
iscorrect.
To connect the load with the UPS, please turn off all the loads first, then perform the connection and
No matter the UPS is connected to the utility power or not, the output of the UPS may have electricity.
The parts inside the unit may still have hazardous voltage after turning off the UPS. To make the UPS have
Suggest charging the batteries for 8 hours before use. After connection, turn the input breaker in the
“ON” position, the UPS will charge the batteries automatically. You can also use the
UPS immediately
without charging the batteries first, but the backup time may be less than the standard value.
or a laser printer to the UPS, the start
-
up power consumption is too
UPS can be connected in parallel to realize
The unit ID in paralleled system must be set to be different.

- 12 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
2. Parallel installation
(1) Users need to opt two standard 15-pin communication cables
which length is appropriate to be less
than 3m.
(2)Strictly follow the stand-
alone wiring requirement to perform the input wiring of each UPS.
(3) Connect the output wires of each UPS to an output breaker panel.
(4) Each UPS needs an independent battery pack.
(5) Please refer to the wiring diagram in the next page, and opt s
uitable breaker.
The requirement of the output wiring is as follows:

It’s recommended that the wires of output of the UPS to be less than 20m.
T
he difference between the wires of input & output of the UPS is required to be less than
The wiring diagram is shown as follows:
Fig 2- 2: Parallel Wiring Diagram
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
which length is appropriate to be less
alone wiring requirement to perform the input wiring of each UPS.
uitable breaker.
It’s recommended that the wires of output of the UPS to be less than 20m.
he difference between the wires of input & output of the UPS is required to be less than
10%.

- 13 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
2.4 Connect Communication Cables
Connect communication cables:
If there are 2 UPS are paralleled, connect communication cables as Fig2-3.
UPS 1# UPS 2#
Fig 2- 3: 2 UPS Paralleled System
If there are 3 UPS are paralleled, connect communication cables as Fig 2-4.
UPS 1# UPS 2# UPS
Fig 2- 4: 3 UPS Paralleled System
NOTICE: must set the UPS is parallel system as “parallel work mode
” via software according to “
A” before start parallel system
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
3#
” via software according to “
Annex

- 14 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
3 Controls and Indicators
TEST/MUTE
OFFON
Fig 3- 1: Display Panel
Description of Panel
Controls Description
1.Press “
” to power on the UPS from battery without
utility power.
NOTE
Not available when UPS is set in automatically start mode
2. Press “ +
”to start inverter when rectifier is OK
3. Press “ +
”to start the ups from battery without
utility
4. Press “
”to confirm setting when in setting mode
5. Press and hold“
”to enter or exit the setting mode
6. Press and hold “ + ”to enter the self-
test mode
when ups is normal, otherwise to mute off the
alarm, press
and hold again to mute on.
1.Press “ ”to page up the LCD menu
2.Press and hold “ ” to enter or exit
the history inquiry
interface
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
” to power on the UPS from battery without
Not available when UPS is set in automatically start mode
”to start inverter when rectifier is OK
”to start the ups from battery without
”to confirm setting when in setting mode
”to enter or exit the setting mode
test mode
alarm, press
the history inquiry

- 15 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
3.Press “ +
”to shutdown inverter and transfer to
bypass
4.Press “ +
” to shutdown UPS completely when UPS
is in battery mode
1.Press“ ”to page down the LCD menu
2.Press and hold“ ”to fault clear
Indicators Description
1. INV
Inverter indicator: green--
inverter is normal, green flicker
rectifier or inverter is starting or tracking with bypass(ECO),
dark—rectifier and inverter is not working
2. BAT Battery indicator: yellow—
battery discharged, yellow flicker
No battery or battery alarm, dark—
battery is connected
3. BYP
Bypass indicator: yellow—
bypass is normal, yellow flicker
bypass is abnormal and alarm ,dark—UPS is
in normal mode
and bypass is normal
4. FAULT FAULT indicator: red—
UPS is abnormal, red flicker
alarm ,dark—UPS is normal
Load capacity Buzzer
Fan
Fault
Battery capacity
Value display
and
setting area
Fig 3- 2: LCD Menu
LCD display is divided into three areas: Icons display ar
ea, value display and settings area, and operation
mode area.
Icons display area ：
There are following contents in the area of display page

Load and battery icons indicate load and battery capacity, and each square represents 25% of
capacity.Load icon will flash when UPS is overloaded;
battery icon will flash when battery capacity is too low
or the battery is not connected.

Fan icon indicates the working status of fans. Normally, the fan shows rotation status. The icon will
flash if fans are disconnected or faulty;
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
”to shutdown inverter and transfer to
” to shutdown UPS completely when UPS
inverter is normal, green flicker
—
rectifier or inverter is starting or tracking with bypass(ECO),
battery discharged, yellow flicker
—
battery is connected
bypass is normal, yellow flicker
—
in normal mode
UPS is abnormal, red flicker
—UPS
Battery capacity
Operation
mode
ea, value display and settings area, and operation
Load and battery icons indicate load and battery capacity, and each square represents 25% of
battery icon will flash when battery capacity is too low
Fan icon indicates the working status of fans. Normally, the fan shows rotation status. The icon will

- 16 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne

Buzzer icon indicates if the buzzer is mute. Normally, this icon doesn’t display. Press and hold
the“ +
” buttons in battery or fault mode or set monitoring software to set MUTE ON in any mode, the
UPS will get into mute status and the buzzer icon will be illuminated.
Fault icon is illuminated in fault mode, it doesn’t display in other cases.
Value display and settings area:
The area of menu setting page showing the settable menu options
The area of event log query page showing page number of hist
ory records
In non-
setting interface, it indicates the relevant information of UPS. Press the“
display input voltage and frequency, output voltage and frequency, battery voltage and capacity, pieces of
battery, load, temperature, software version, etc.
The fault code will be displayed in fault mode.
In menu setting interface, include rate
voltage value (OPU), physical address(Id), parallel Enable
(PAL), Expert mode (EP), Battery numbers(PCS),Emergency power off (EPO),etc.
Operation mode area:
After starting up in 5
seconds, this display area mainly indicates the UPS power rating.
settable.

This display area mainly indicates the UPS operation mode in 20 seconds after starting up, such as
stdby (Standby mode), bypass (Bypass mode), online (Utility mode),bat
(Battery mode), b
test mode), fault (Fault mode), cucf
(Frequency conversion mode), ECO (economy mode)
Description of LCD Menu:
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
Buzzer icon indicates if the buzzer is mute. Normally, this icon doesn’t display. Press and hold
” buttons in battery or fault mode or set monitoring software to set MUTE ON in any mode, the
ory records
setting interface, it indicates the relevant information of UPS. Press the“
”or“ ”button to
display input voltage and frequency, output voltage and frequency, battery voltage and capacity, pieces of
voltage value (OPU), physical address(Id), parallel Enable
(PAL), Expert mode (EP), Battery numbers(PCS),Emergency power off (EPO),etc.
seconds, this display area mainly indicates the UPS power rating.
This function is
This display area mainly indicates the UPS operation mode in 20 seconds after starting up, such as
(Battery mode), b
att (Battery self
(Frequency conversion mode), ECO (economy mode)
.

- 17 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
Page Description
Page 1 (output interface): Display UPS
information
Page 2 (bypass
interface): Display UPS output
information
Page 3
: Display UPS load information
Page 4
: Display UPS software version and
temperature information
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
Page 1 (output interface): Display UPS
output
interface): Display UPS output
: Display UPS load information
: Display UPS software version and

- 18 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
Page 5
: Display UPS input information
Page 6: Display UPS batt
ery voltage, battery
capacity percentage
Page 7
: Display UPS battery numbers,
Warning code Page: Display UPS warning
code (ALA means alarm) All warning code
information refer to “troubleshooting”.
H - history, H01 - first
history event.
history event code.
StS0-event appears. 1-
event
History event query is for qualified personnel
use only.
History event query
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
: Display UPS input information
ery voltage, battery
: Display UPS battery numbers,
Warning code Page: Display UPS warning
code (ALA means alarm) All warning code
information refer to “troubleshooting”.
history event.
044 -
event
disappears
History event query is for qualified personnel

- 19 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
Press and hold the “
” button to enter Event log query interface; Press inquiry button “
over event logs with page turning. There are maximum 20 pages (600 pieces
monitoring software
records. Press and hold the “ ” button again to return to the home screen.
Parameters setting
If want to set rated parameters, Press and hold “ ” in setting mode, the
settable menu will
Charger
current
setting
Charger current could be set as
follow,
Press “ ”or “ ” to
select, press
“ ”to confirm
selection
Standard model:1A
Long backup model :1,2,3,4,5A
Optional charger 12A for 6-
10kVA:1
-12A
Optional charger 10A for 15-
20kVA
： 1-10A
Parallel ID
setting
1- parallel Id1
In parallel mode, the parallel ID
could be set as
1 to 19
press “ ”or “ ” to select,
press
“ ”to confirm selection
Parallel
mode
setting
Could select
ON: parallel mode
OFF: single mode
press “ ”or “ ” to select,
press
“ ”to confirm selection
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners
” button to enter Event log query interface; Press inquiry button “
”or “ ” to look
monitoring software
) event logs
settable menu will
flick.

- 20 -
EG
-
UPSO
ONLINE UPS, 6/10 K
VA, USB + SNMP SLOT
GEMBIRD EUROPE B.V.
http://www.gembird.eu
All brands and logos are registered trademarks of their respective owne
EP mode
setting
Could select
ON: enable, you can select
EPO,ECO,
Rated frequency,
Battery
number, Charger current
setting
OFF:disable (default doesn't
work)
Press “ ”or “ ” to select,
press
“ ”to confirm selection
Rated
voltage
setting
Could select rated voltage as
208Vac/ 220Vac/ 230Vac/
240Vac, press “ ”or “ ” to
select, press “ ”to confirm
selection. The setting will be
activated after restart UPS.
ECO mode
setting
Could select
ON: enable
OFF: disable
press “ ”or “ ” to select,
press “ ”to confirm selection
EPO
setting
Could select
ON: enable
OFF: disable (default doesn't
work)
Press “ ”or “ ” to select,
press “ ”to confirm selection
UPSO
-
6000/
10000
VA, USB + SNMP SLOT
ners