6/8 energysistem.com
available: Bluetooth and Line-in. Press On/Off/Playback mode (1) repeatedly until finding the preferred playback mode.
You will also hear the word identifying each mode.
Bluetooth (BT)
To pair your soundbar with a source device via Bluetooth, switch on the Gaming Soundbar ESG 2 Sonar and enable
Bluetooth mode. At this point the RGB lights start flashing blue, meaning the device is ready for Bluetooth pairing.
Access the Bluetooth settings on the source device and search for ?Energy Sistem GS ESG 2" among the detected
devices. Once selected, the devices will be connected immediately. You will hear a sound confirming both devices are
correctly paired. The RGB lights will light up as usual.
Your Gaming Soundbar ESG 2 Sonar connects to the last paired device automatically when you switch it on once again,
provided that the Bluetooth connection on the source device is enabled.
IMPORTANT: The soundbar turns off automatically after 5 minutes if not paired with any device.
Auxiliary audio input (AUX)
Make the most of your Gaming Soundbar ESG 2 Sonar using the 3.5 mm jack cable for audio input (5). The audio input
allows you to connect an external device.
NOTE 1: Use the provided 3.5 mm Y splitter cable (1 female to 2 male connectors) to connect the soundbar to a PC
featuring two separate audio and microphone connections.
NOTE 2: It is not possible to control music playback from the soundbar while using this mode. You will have to use the
connected music player instead.
NOTE 3: We recommend using a 3.5 mm jack to USB Type-C adapter to connect the soundbar to a smartphone
featuring a USB-C connection.
Audio output
The Gaming Soundbar ESG 2 Sonar has a 3.5 mm audio output (4) on the front to connect your headset.
NOTE: If your headset features two separate audio and microphone connectors, you will need a Y splitter cable (2
female to 1 male connector).
Playback control
Select a playback mode and you will be able to control all playback functions from your Gaming Soundbar ESG 2 Sonar.
Press Volume -/Light mode (2) or Volume +/Colour (3) to adjust the volume according to your preferences.
Press On/Off/Playback mode (1) to play or pause a song.
Important: Bear in mind that you can only control playback from the connected music player while using AUX mode
(audio-in).
Light modes
Your Gaming Soundbar ESG 2 Sonar features RGB lighting effects in different colours.
Press and hold Volume -/Light mode (2) for 2 seconds to switch between the different lighting effects of your Gaming
Soundbar ESG 2 Sonar.
You can choose the colour of each effect. To do so, press and hold the Volume +/Colour (3) for 2 seconds.
