Energy Power base User manual

ENERGY POWER®BASE
OWNER’S MANUAL
$TRIM LINE $ $ TRIM LINE $

$TRIM LINE $ $ TRIM LINE $

WHAT’S INSIDE
Energy Power®Base Remote
AC Power Cord Digital Optical Cable 3.5mm to Dual RCA Cable
$TRIM LINE $ $ TRIM LINE $

POWER
ON
OFF
OPTICAL L
R
AC~100-240V
50/60Hz
80W
2
3
145
Optical
TV
Digital Audio Out
POWER
ON
OFF
OPTICAL L
R
2
3
1
Audio Out
Energy Power Base
Energy Power Base
TV
L
R
POWER
ON
OFF
OPTICAL L
R
2
3
1
Headphone
Energy Power Base
TV
6
4
5
4
5
AC~100-240V
50/60Hz
80W
AC~100-240V
50/60Hz
80W
DIGITAL OPTICAL CONNECTION (PREFERRED - IF TV HAS NO OPTICAL OUT SEE NEXT PAGE)
$TRIM LINE $ $ TRIM LINE $

POWER
ON
OFF
OPTICAL L
R
AC~100-240V
50/60Hz
80W
2
3
145
Optical
TV
Digital Audio Out
POWER
ON
OFF
OPTICAL L
R
2
3
1
Audio Out
Energy Power BaseEnergy Power Base
TV
L
R
POWER
ON
OFF
OPTICAL L
R
2
3
1
Headphone
Energy Power Base
TV
6
4
5
4
5
AC~100-240V
50/60Hz
80W
AC~100-240V
50/60Hz
80W
3.5mm TO DUAL RCA ANALOG CONNECTION (IF TV HAS NO HEADPHONE OUT SEE NEXT PAGE)
QUICK START

POWER
ON
OFF
OPTICAL L
R
AC~100-240V
50/60Hz
80W
2
3
145
Optical
TV
Digital Audio Out
POWER
ON
OFF
OPTICAL L
R
2
3
1
Audio Out
Energy Power Base
Energy Power Base
TV
L
R
POWER
ON
OFF
OPTICAL L
R
2
3
1
Headphone
Energy Power Base
TV
6
4
5
4
5
AC~100-240V
50/60Hz
80W
AC~100-240V
50/60Hz
80W
DUAL RCA TO DUAL RCA ANALOG CONNECTION
RCA Cables not included.

TV REMOTE PROGRAMMING
Press
and
Hold
2
1Solid Green
Solid Orange
One Foot
7Flashing Green
to Solid Green
8To program Volume Up and Volume
Down buttons repeat the steps shown
and replace steps 4 and 6 with the
button you want to program.
1 2 3
4 5 6
7 8
0
Mute
ChVol
9
Press Slowly x4
6
3Flashes Orange
Press Once x1
4
5
To program Volume Up and Volume Down buttons
repeat the steps shown and replace steps 4 and 6
with the button you want to program.
If you are trying to program a cable/satellite box
remote or other universal remote without success,
please try programming your TV or Cable Box
remote instead.

BLUETOOTH ® WIRELESS TECHNOLOGY
Bluetooth
Bluetooth
ON
PowerBase
Devices
Connected
Settings
Bluetooth
Bluetooth
ON
PowerBase PowerBase
Devices
Not Connected
Settings
1 2 3 You can pair a device equipped with
Bluetooth
wireless technology at any time by activating it on
your device.
Once your device equipped with Bluetooth
wireless technology is paired, the Energy Power
Base will automatically switch to the Bluetooth
wireless technology input (SOLID BLUE LIGHT)
and you can stream your music. If you switch
inputs on the Energy Power Base, the Bluetooth
wireless technology connection will automatically
be terminated.
You must disconnect your device before pairing
another device equipped with Bluetooth wireless
technology by either:
•Pressing and holding the SOURCE button on
the Energy Power Base control panel 3 seconds
• Turning off Bluetooth wireless technology on
the paired device
• Pressing the Bluetooth wireless technology
button (∞) on the Energy Power Base remote
*Example only. Your device may differ.

BUTTONS
On / Off
3D Surround
Bluetooth
Source
Status Light
Mute
Volume Up
Volume Down
Source
Volume Up
Volume Down
Mute
Subwoofer
Volume Up
Subwoofer
Volume Down

STATUS LIGHTS
STANDBY MODE
SOLID RED Power Off (Standby Mode) FLASHES GREEN ONCE 3D Surround turned on
SOLID GREEN Power On, Source is Optical Input FLASHES RED ONCE 3D Surround turned off
SOLID ORANGE Power On, Source is Analog Input FLASHES BLUE QUICKLY Waiting to pair with Bluetooth
device
SOLID BLUE Power On, Source is Paired
Bluetooth device
FLASHES PURPLE SLOWLY Energy Power Base decoding
Dolby Digital
FLASHES GREEN /
ORANGE / BLUE
Volume Up, Volume Down, Subwoofer
Volume Up or Subwoofer Volume
Down is pushed
You do not need to turn off the Energy Power Base,
just turn off your TV (or Satellite / Cable Box) and
the Energy Power Base will automatically go into
standby mode in approximately 10 minutes.
Standby mode is indicated by a red status light on
the front panel. When your TV (or Satellite / Cable
Box) is turned back on the Energy Power Base will
automatically turn on again.

23”(58cm)
12”(30cm)
CRT
23”(58cm)
12”(30cm)
CRT
PLACEMENT
TV must weigh less than 80 lbs (36kg)
TV base must be smaller than
23” x 12” (58cm x 30cm)
Make sure the rear of the Energy Power Base is
at least one inch away from a back wall and there
is at least one inch clearance around the top and
sides of the Energy Power Base for ventilation.

TURN OFF TV SPEAKERS
CARE AND CLEANING
TV Speakers
TV Audio Settings Menu
(Recommended)
OR
Volume
Volume
On
TV Speakers Off
1
2
1
2

Energy Power Base will not Power On
• Is it plugged into a live outlet?
• Is the rear power switch on?
No sound
• Is it plugged into a live outlet and the rear power switch is on?
• Are all cables from the TV/Cable Box/Satellite Box plugged in tightly?
• If the optical cable is being used were the clear plastic caps from
both ends removed before connecting?
• Is the volume turned up?
• Is standby o (no SOLID RED status light)?
• Is the source input correct?
• Turn o the rear power switch, then back on.
TV/Cable/Satellite Box Remote will not program
• Carefully follow all remote programming instructions.
• Carefully go through the remote programming again, but use the
original remote that comes with the TV. You DO NOT need to then
reprogram using your cable/satellite/universal remote control.
• Program the original TV remote to the Energy Power Base (if
original is a dierent one), then use the universal remote without
programming it.
• You may need to repeat programming of a function in some cases.
• There may be some cases the Energy Power Base is unable to learn
certain remote codes.
Bluetooth Wireless Technology does not work
• Is the device paired to the Energy Power Base?
• Move your device closer to the Energy Power Base and make sure it
is paired.
• If the status light blinks RED while attempting to pair, start the
pairing process over.
For Questions, contact Energy Customer Service:
In the United States: 1-866-441-8208
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
registered trademarks of Dolby Laboratories.
The
Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Klipsch Group, Inc. is under license.
TROUBLESHOOTING

COMPOSANTS INCLUS
Energy Power®Base Télécommande
Cordon d’alimentation c.a. Câble optique numérique Câble 3,5 mm vers double fiche RCA

POWER
ON
OFF
OPTICAL L
R
AC~100-240V
50/60Hz
80W
2
3
145
Optical
TV
Digital Audio Out
POWER
ON
OFF
OPTICAL L
R
2
3
1
Audio Out
Energy Power Base
Energy Power Base
TV
L
R
POWER
ON
OFF
OPTICAL L
R
2
3
1
Headphone
Energy Power Base
TV
6
4
5
4
5
AC~100-240V
50/60Hz
80W
AC~100-240V
50/60Hz
80W
CONNEXION OPTIQUE NUMÉRIQUE (RECOMMANDÉE – SI LE TÉLÉVISEUR N’A PAS DE SORTIE OPTIQUE, VOIR PAGE SUIVANTE)

POWER
ON
OFF
OPTICAL L
R
AC~100-240V
50/60Hz
80W
2
3
145
Optical
TV
Digital Audio Out
POWER
ON
OFF
OPTICAL L
R
2
3
1
Audio Out
Energy Power BaseEnergy Power Base
TV
L
R
POWER
ON
OFF
OPTICAL L
R
2
3
1
Headphone
Energy Power Base
TV
6
4
5
4
5
AC~100-240V
50/60Hz
80W
AC~100-240V
50/60Hz
80W
CONNEXION ANALOGIQUE 3,5 MM VERS DOUBLE FICHE RCA
(SI LE TÉLÉVISEUR N’A PAS DE SORTIE POUR CASQUE D’ÉCOUTE, VOIR PAGE SUIVANTE)

POWER
ON
OFF
OPTICAL L
R
AC~100-240V
50/60Hz
80W
2
3
145
Optical
TV
Digital Audio Out
POWER
ON
OFF
OPTICAL L
R
2
3
1
Audio Out
Energy Power Base
Energy Power Base
TV
L
R
POWER
ON
OFF
OPTICAL L
R
2
3
1
Headphone
Energy Power Base
TV
6
4
5
4
5
AC~100-240V
50/60Hz
80W
AC~100-240V
50/60Hz
80W
CONNEXION ANALOGIQUE DOUBLE FICHE RCA VERS DOUBLE FICHE RCA
Non fourni

PROGRAMMATION À DISTANCE DU TÉLÉVISEUR
Appuyez et
maintenez
2
1Vert continu
Orange continu
30 cm
7Vert clignotant
à vert solide
8To program Volume Up and Volume
Down buttons repeat the steps shown
and replace steps 4 and 6 with the
button you want to program.
1 2 3
4 5 6
7 8
0
Mute
ChVol
9
Appuyez lentement 4 fois
6
3Clignotements
Orange
Appuyez une fois
4
5
Pour régler les boutons pour augmenter et réduire
le volume, répétez les étapes indiquées et remplacez
les étapes 4 et 6 par le bouton que vous souhaitez
programmer.
Si vous n’arrivez pas à programmer une télécom-
mande de décodeur satellite ou de câblodistribution
ou une autre télécommande universelle, essayez de
programmer la télécommande de votre téléviseur ou
de votre décodeur de câblodistribution.

TECHNOLOGIE SANS FIL BLUETOOTH
®
Bluetooth
Bluetooth
ON
PowerBase
Devices
Connected
Settings
Bluetooth
Bluetooth
ON
PowerBase PowerBase
Devices
Not Connected
Settings
1 2 3 Vous pouvez apparier un appareil
Bluetooth à tout
moment en activant Bluetooth sur votre appareil.
Une fois l’appareil Bluetooth apparié, l’Energy Power
Base bascule automatiquement sur l’entrée Bluetooth
(VOYANT BLEU CONTINU) et vous pouvez procéder
à la diffusion de votre musique. Si vous changez
d’entrée sur l’Energy Power Base, la connexion
Bluetooth se termine automatiquement.
Vous devez déconnecter un appareil Bluetooth avant
d’apparier un autre appareil Bluetooth , en procédant
suivant l’une de ces méthodes :
• Appuyez sur le bouton SOURCE sur le panneau de
commande de l’Energy Power Base et
maintenez-le enfoncé pendant 3 secondes
• Désactivez Bluetooth sur le dispositif apparié.
• Appuyez sur le bouton Bluetooth sur la
télécommande de l’Energy Power Base
*À titre d’exemple seulement. Votre appareil peut être différent.

TOUCHES
Sous tension/Hors tension
Ambiophonie 3D
Bluetooth
Source
Voyant d’état
Sourdine
Volume haut
Volume bas
Source
Volume haut
Volume bas
Sourdine
Volume haut du
caisson de graves
Volume bas du
caisson de graves