Enerlites HMVS User manual

enerlites.com | Phone: [phone] | Fax: [phone] | e-mail: [email protected]
• Manual ON / automatically OFF (Vacancy Mode)
• Time delay from 15 seconds (test mode) to 20 minutes
• Neutral wire required
Testing & Code Compliance
Specifi cations
Voltage
Incandescent
LED
Fluorescent
Motor
Time delay
Operating Temperature
120 Vac, 60 Hz
500W
150W
500 VA
1/8 HP
15 Sec to 20 Mins
32 F to 131 F
*Coverage Area
Best: 180 sq.ft.
Regular: 450 sq.ft.
Maximum: 700 sq.ft.
As illustrated in Figure 1, The HMVS-J has a 180°
detection range with a maximum distance of 30’
detection in front of the sensor and 12’ on the
sides providing 700 sq. ft. of coverage. For maxi-
mum results, the sensor must be properly installed
between the height of 4’ to 5’ and away from ob-
structions such as walls, furniture and transparent
barriers like Low-E glass.
Figure 1
In-Wall Vacancy Sensor
Model No: HMVS
Description
The passive infrared sensors work by detecting the dif-
ference between heat emitted from the human body in
motion and the background space. The sensor switch can
turn a load on and hold it as long as the sensor detects
occupancy. After no motion is detected for the set time
delay, the load turned off automatically.
Features

Installation & wiring
*
3. Gently position wires in wall box, attach sensor switch to the box.
2. Device “TOP” upward.
4. Restore power at circuit breaker or fuse, wait one minute.
5. Locate the toggle switch on both sides of the top cover to perform
test and adjustment.
Your switch ships with top cover attached. It is convenient for users to
OPEN
CLOSE
Line up tabs and push up to attach
Changing the color of your switch
1. 2.
Figure 3
Push down top cover to release
change the top cover. Please proceed as follows:
1. Connect RED wire from sensor to the LOAD wire.
2. Connect BLACK wire from sensor to the HOT wire.
3. Connect WHITE wire from sensor to the NEUTRAL wire. NEUTRAL
WIRE IS REQUIRED.
4. Connect GREEN wire from sensor to the GROUND wire.
Wiring Diagram
Figure 2

Default position
Adjustable
10 Seconds
20 Minutes
15 Seconds (Test mode)
Time delay setting
Enerlites Inc.
www.enerlites.com
Phone: [phone] Fax: [phone] e-mail: [email protected]
Adj ustment
Mode
VAC
Description
Vacancy Mode: Manual On only,
Automatic Off after set time delay.
Manually push
On/Off the load.
Band switch prescription
Function of ON/OFF button
Figure 4
© 2016 Enerlites Inc.
CA, U.S.A.
WWW.ENERLITES.COM
0211160073-03