ENFORCER EV-Y2501-A2WWQ User manual

4-in-1 HD Cameras
with WDR
On-Screen Display Manual
EV-Y2501-AMWWQ shown
Model Lens Resolution Voltage Style Color
EV-Y2501-A2WWQ 2.8mm
5MP 12VDC
Turret
White
EV-Y2501-AMWWQ 2.8~12 mm
EV-Y1501-A2WWQ 2.8mm Bullet
EV-Y1501-AMWWQ 2.8~12 mm

4-in-1 HD Cameras with WDR
2 SECO-LARM U.S.A., Inc.
Image Enhance
................................
............
6~7
Video Setting .................................................... 7
Language ......................................................... 7
WDR ................................................................. 8
Exit ................................................................... 8
Warranty ........................................................... 8
Table of Contents
Programmable Features
 True Wide Dynamic Range (WDR) –
Provides clear images even under
circumstances where backlight illumination
can vary
 Multiple Output Formats – Can select
between multiple different formats: AHD,
CVI, TVI, and CVBS
 Exposure – Adjustable exposure settings,
including brightness, and exposure modes.
 Back Light Compensation (BLC) –
Adjusts the exposure to properly display
the subject in front of bright light sources
 White Balance – Adjusts the picture’s
color temperature/image color
 Day & Night – Adjusts the level of ambient
light that triggers the camera to switch
between color and B/W modes
 Digital Noise Reduction (DNR) – Adjusts
for less interference on the screen in an
area with low illumination
NOTE: All screen images in this manual are simulated.
Programmable Features
................................
...
2
OSD DIP Switch ............................................... 3
Main Menu ........................................................ 3
Menu Diagram .................................................. 4
Exposure .......................................................... 5
Auto White Balance (AWB) .............................. 5
Day & Night ...................................................... 6
WDR Off
WDR On
BLC Off
BLC On
DNR Off
DNR On

4-in-1 HD Cameras with WDR
SECO-LARM U.S.A., Inc. 3
OSD DIP Switch
Set the Format via the OSD DIP Switch (located on
the camera), move the DIP Switches to the following
combinations. The format selected will determine the
settings shown on the On-Screen Display Menu.
Format
Dip
Switch
1
DIP Switch 2
TVI (Default) OFF OFF
AHD
OFF
ON
CVBS (Analog)
ON
ON
CVI
ON
OFF
Main Menu
NOTE: An  indicates that a submenu is available.
M A I N
A E 
A W B 
D A Y / N I G H T 
I M A G E E N H A N C E 
V I D E O S E T T I N G 
L A N G U A G E  E N G L I S H 
W D R     O F F 
F U N C 
R E S E T
S A V E & E X I T
E X I T
ON
1
TVI AHD CVBS CVI
ON ON ON
2 1 2 1 2 1 2

4-in-1 HD Cameras with WDR
4 SECO-LARM U.S.A., Inc.
Menu Diagram
Main Menu
Setting
Setting Options
AE
Brightness
1~100 (D
efault
: 36)
BLC
0~7 (D
efault
: 4)
G
loba
l
—
AWB Mode
Pro
R G
ain
: 0~100 (D
efault
: 50)
B
G
ain
: 0~100 (D
efault
: 50)
Grayworld
R G
ain
: 0~100 (D
efault
: 50)
B
G
ain
: 0~100 (D
efault
: 50)
Day Night
Ext
—
B/W
—
Color
—
Image Enhance
Contrast
Auto,
M
anual: 0~20 (
D
efault:
6
)
Sharpness
Auto,
M
anual: 0~20 (
D
efault:
3
)
Saturate
Auto,
M
anual: 0~20 (
D
efault:
10
)
3DNR
Auto,
M
anual: 0~20 (
D
efault:
6
)
2DNR
Auto,
M
anual: 0~20 (
D
efault:
19
)
Flip
On, Off (Default Off)
Mirror
On, Off (Default Off)
Video Setting
TVI
5MP 20FPS, 4MP 30FPS, 4MP 25FPS, 1080P 30FPS,
1080P 25FPS
CVBS
NTSC, PAL
AHD
5MP 20FPS, 4MP 30FPS, 4MP 25FPS, 1080P 30FPS,
1080P 25FPS
CVI
4MP 30FPS, 4MP 25FPS, 1080P 30FPS, 1080P 25FPS
Language
ENG/ CH1/CH2/ ITA/ RUS/ POR/ POL/ JAP/ KOR/ FRE
WDR
On, Off (Default Off)
Func > Privacy
Mode
On, Off (Default Off)
Arena 0~3
Set privacy zone
Color
Black, red, green, blue
Transparency
O
n,
O
ff (default
O
ff)
Reset
Save & Exit
Exit

4-in-1 HD Cameras with WDR
SECO-LARM U.S.A., Inc. 5
Exposure
This function is used to select the camera’s exposure settings, including brightness, and exposure
modes: Global and BLC.
1. Select Auto Exposure "AE" on the Main Menu screen.
2. Select the desired Exposure operation.
 BRIGHTNESS – Adjust the camera’s
brightness from 1~100 (Default: 36).
 Exposure Mode:
o GLOBAL – Choose to automatically
adjust light level based on environment.
o BACKLIGHT (BLC) – Choose to allow
the camera to automatically control the
light level to overcome strong backlight
conditions. Select Back Light
Compensation (BLC) to correct the
exposure of the subjects that are in front
of a strong backlight. Enter the menu to
adjust settings.
 LEVEL – Adjust the BLC level from
0~7 (Default: 4).
 RETURN – Return to the MAIN MENU
screen.
Auto White Balance (AWB)
This function is used to adjust the color
temperature and image color of the picture.
1. Select AWB on the Main Menu screen.
2. Select the desired White Balance operation.
3. Adjust the settings.
 Mode:
o PRO – Select MANUAL to manually adjust the blue and red color temperature values for
the area.
 RGAIN – Set the red gain value. Adjust from 0~100 (Default: 50).
 BGAIN – Set the blue gain value. Adjust from 0~100 (Default: 50).
o GRAY WORLD – This function adjusts the white balance to gray rather than white
resulting in better exposure based on the environment.
 RGAIN – Set the red gain value. Adjust from 0~100 (Default: 50).
 BGAIN – Set the blue gain value. Adjust from 0~100 (Default: 50).
 RETURN – Return to the MAIN MENU screen.
E X P O S U R E
B R I G H T N E S S  3 6 
E X P O S U R E M O D E  B L C 
B L C  4 
R E T U R N
E X P O S U R E
B R I G H T N E S S  3 6 
E X P O S U R E M O D E  GLOBAL 
R E T U R N
BLC Off BLC On
A W B
M O D E  G R A Y W O R L D 
R G A I N  5 0 
B G A I N  5 0 
R E T U R N

4-in-1 HD Cameras with WDR
6 SECO-LARM U.S.A., Inc.
Day and Night
This function is used to adjust the transition between color and black & white modes automatically
based on the current lighting conditions.
1. Select DAY / NIGHT on the Main Menu
screen.
2. Select the desired mode.
 Mode
o EXT – Select External (EXT) mode to automatically switch between Color and B/W modes
by using the integrated IR CDS sensor.
o COLOR – Select COLOR to force the camera to display in color mode at all times.
o B/W – Select B/W to force the camera to display in B/W mode at all times.
 RETURN – Return to the MAIN MENU screen.
NOTE: If DAY & NIGHT is set to B/W then WHITE BAL is not available.
Image Enhance
This function accesses the video image to enhance functions such as contrast, sharpness,
saturation, 3DNR, 2DNR, flip, and mirror.
1. Select IMAGE ENHANCE on the Main Menu screen.
2. Select the desired menu operation.
3. Adjust the settings.
 CONTRAST – Adjust the difference between the lightest and darkest parts of an image or
video stream.
o AUTO
o MANUAL – 0~20 (Default: 6).
 SHARPNESS – Adjust to increase the contrast of edges in a video or image.
o AUTO
o MANUAL – 0~20 (Default: 3).
D A Y N I G H T
M O D E  E X T 
R E T U R N
I M A G E E N H A N C E
C O N T R A S T  A U T O 
S H A R P N E S S  A U T O 
S A T U R A T E  A U T O 
3 D N R  A U T O 
2 D N R  A U T O 
F L I P  O F F 
M I R R O R  O F F 
R E T U R N


4-in-1 HD Cameras with WDR
SECO-LARM U.S.A., Inc. 7
Image Enhance (Continued)
 SATURATE – This function is used to increase or decrease the amount of color hue within
the frame.
o AUTO
o Manual – Adjust from 0~20 (Default: 10).
 3DNR – Select 3D Digital Noise Reduction (3DNR) for
general lighting conditions. Higher levels of DNR will
decrease the noise in the image but also potentially
affect the sharpness.
o AUTO
o MANUAL: Adjust from 0~20 (Default: 6).
 2DNR – Select 2D Digital Noise Reduction (2DNR) for
low lighting conditions. Higher levels of DNR will
decrease the noise in the image but also potentially
increase after images.
o AUTO
o MANUAL: Adjust from 0~20 (Default: 19).
 FLIP – Select ON (Default: OFF) to flip the display
vertically.
 MIRROR – Select ON (Default: OFF) to flip the display horizontally.
 RETURN – Return to the MAIN MENU screen.
Video Setting
This function is used to change the Video Output and Video Standards.
1. Select VIDEO SETTING on the Main Menu
screen.
2. Select the desired operation.
 HD
o TVI
 STANDARD – 5MP 20FPS. 4MP 30/25FPS,1080p 30/25FPS (Default: 5MP 20FPS)
o AHD
 STANDARD – 5MP 20FPS. 4MP 30/25FPS, 1080p 30/25FPS (Default: 5MP 20FPS)
o CVI
 STANDARD – 4MP 30/25FPS, 1080p 30/25FPS (Default: 4MP 30FPS)
o CVBS
 STANDARD – NTSC, PAL (Default: NTSC)
Language
Set the desired OSD menu language. Select from English, Chinese1 (Simplified), Chinese2
(Traditional), Russian, Spanish, French, Polish, Italian, Portuguese, Japanese, or Korean.
DNR Off
DNR On
V I D E O S E T T I N G
H D  T V I 
S T A N D A R D  5 M P 2 0 
R E T U R N


4-in-1 HD Cameras with WDR
8 SECO-LARM U.S.A., Inc.
WDR
WDR provides clear images even under circumstances
where backlight illumination can vary.
 WDR – ON/OFF (Default: ON)
Privacy
This function is used to create privacy zones on the display.
1. Select FUNC on the Main Menu screen.
2. Select PRIVACY.
3. Select the desired operation.
 MODE – Select ON/OFF.
 AREA (0~3) – Can activate up to 4 zones
on the display.
o DISPLAY– ON/OFF (Default: OFF)
o XPOSITION START – 0~100
(Default: 0)
o YPOSITION START – 0~100
(Default: 0)
o WIDTH – 0~100 (Default: 28)
o HEIGHT– 0~100 (Default: 39)
 COLOR – Choose between Black, Red, Green, or Blue (Default: Black).
 TRANSPARENCY – Select ON/OFF (Default: OFF).
 RETURN – Return to MAIN MENU screen.
WDR Off WDR On
F U N C
P R I V A C Y 
R E T U R N

P R I V A C Y
M O D E  O F F 
A R E A 0  
A R E A 1 
A R E A 2 
A R E A 3 
C O L O R   B L A C K 
T R A N S P A R E N C Y  O F F 
R E T U R N


4-in-1 HD Cameras with WDR
Exit
 RESET – Restore all OSD settings to factory defaults and exit the OSD menu.
 SAVE & END – Save all OSD changes and exit the OSD menu.
 EXIT– Exit the OSD menu without saving any changes.
FCC COMPLIANCE STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)
THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitt
ed. Any change to the antenna
or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
IMPORTANT
:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and loca
l laws and statutes related to
monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or statutes.
IMPORTANT:
Users and installers of this product are responsib
le for ensuring that the installation and configuration of this product complies with all national, state,
and local laws and codes. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes.
California P
roposition 65 Warning:
These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
WARRANTY:
This SECO
-
LARM product is warranted against defects in material and workmanship while used in normal service for
one
(
1
)
year from the date of sale
to the original customer. SECO-LARM’s obligation is limi
ted to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to
SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alte
ration, improper
or abnormal usage, or faulty installation, or if for any other reason SECO-
LARM determines that such equipment is not operating properly as a result of causes other
than defects in material and workmanship. The sole obligation of SECO-LARM and the
purchaser’s exclusive remedy, shall be limited to the replacement or repair
only, at SECO-LARM’s option. In no event shall SECO-
LARM be liable for any special, collateral, incidental, or consequential personal or property damage of any
kind to the purchaser or anyone else.
NOTICE:
The SECO
-
LARM policy is one of continual development and improvement. For that reason,
SECO
-
LARM
reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2023
SECO-LARM U.S.A., Inc. All rights reserved.
SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA
92606
Website:
www.seco
-
larm.com
Phone: [phone] | [phone] Email: [e-mail]
PICRN3
MI_EV
-
Yx501
-
AxWWQ_OSD_230411.docx