ENFORCER EV-Y2251-A2WQ User manual

4-in-
1 HD TVI, CVI, AHD
Analog Cameras
On-Screen Display Manual
EV-Y2251-A2WQ shown
Model Lens Resolution Voltage Style Color
EV-Y2251-A2WQ 2.8mm 2MP 12VDC Turret White
EV-Y2251-AMWQ 2.8~12 mm 2MP 12VDC Turret White

4-in-1 HD TVI, CVI, AHD Analog Cameras
2 SECO-LARM U.S.A., Inc.
Programmable Features ................................... 2
Set Format via the DIP Switch .......................... 3
Main Menu ........................................................ 3
Menu Diagram .................................................. 4
Exposure .......................................................4~5
Auto White Balance ......................................5~6
Day & Night ...................................................... 6
Image Enhance ............................................ 6~7
Video Output ..................................................... 8
Exit .................................................................... 8
Warranty ........................................................... 8
Table of Contents:
Programmable Features
 Multiple Output Formats
Select between multiple different
formats: AHD, CVI, TVI, and
CVBS.
 Exposure
Adjust the exposure settings,
including brightness, and
exposure modes.
 Back Light Compensation
(BLC)
Adjust the exposure to properly
display the subject in front of
bright light sources.
 White Balance
Adjust the picture’s color
temperature/image color.
 Day & Night
Adjust the level of ambient light
that triggers the camera to switch
between color and B/W modes.
 Noise Reduction (DNR)
Adjust for less interference on
the screen in an area with low
illumination.
NOTE: All screen images in this
manual are simulated.
BLC OFF
BLC ON
DNR OFF
DNR ON

4-in-1 HD TVI, CVI, AHD Analog Cameras
SECO-LARM U.S.A., Inc. 3
Set Format via the DIP Switch
To set the Format via the DIP switch, move the DIP switches to the following combinations.
Main Menu
NOTE: An  indicates that a submenu is available.
Format Dip Switch 1 DIP Switch 2
TVI (Default) OFF OFF
AHD OFF ON
CVBS (Analog) ON ON
CVI
ON
OFF
ON
1
TVI AHD CVBS CVI
ON ON ON
2 1 2 1 2 1 2

4-in-1 HD TVI, CVI, AHD Analog Cameras
4 SECO-LARM U.S.A., Inc.
Menu Diagram
M
ain
M
enu
S
etting
S
etting
O
ptions
Auto
Exposure
Brightness 1~100 (Default: 29)
BLC 0~7 (Default: 4)
Global
—
FLC
—
Center
—
Auto
White Bal
ATW
—
Manual 0~63 (Default: 40)
0~63 (Default: 30)
Gray world
—
Day & Night
EXT —
B/W
—
Color
—
Contrast Auto, Manual: 0~20 (Default:10)
Sharpness
Auto
,
M
anual
: 0~
2
0
(
D
efault
:
8)
Saturate Auto, Manual: 0~20 (Default:10)
DNR
1~16 (
D
efault
:
7)
2DNR Auto, Manual: 0~20 (Default: 0)
3DNR Auto, Manual: 0~20 (Default: 0)
TVI
1080P 30FPS, 1080P 25FPS
CVBS
NTSC, PAL
AHD
1080P 30FPS, 1080P 25FPS
CVI
1080P
30FPS, 1080P 25FPS
Language ENG/ CH1/CH2/ ITA/ RUS/ POR/ POL/ JAP/ KOR/ GRK
Exit
Reset
Save
-
E
xit
Exit
Exposure
This function is used to select the camera’s
exposure settings, including the brightness,
and exposure modes.
1. Select Auto Exposure "AE" on the Main
Menu screen.
2. Select the desired Exposure operation.
 Brightness – Adjust the camera’s
brightness from 1~100 (Default: 29).

4-in-1 HD TVI, CVI, AHD Analog Cameras
SECO-LARM U.S.A., Inc. 5
Exposure (Continued)
EXPOSURE MODE:
 GLOBAL – Choose to
automatically adjust light level
based on environment.
 BACKLIGHT (BLC) – Choose to
allow the camera to automatically
control the light level to overcome
strong backlight conditions. Select
Back Light Compensation (BLC) to
correct the exposure of the
subjects that are in front of a strong
backlight. Enter the menu to adjust
settings.
o LEVEL – Adjust the BLC level
from 0~7 (Default 4).
 FLC – This function is used to
control the light level to overcome
strong front light conditions.
 CENTER – This function samples
the center of the image to
determine the exposure for the
entire field of view.
 RETURN – Return to the MAIN MENU screen.
Auto White Balance (AWB)
This function is used to adjust the color temperature and image color of the picture.
1. Select AWB on the Main Menu screen.
2. Select the desired White Balance
operation.
3. Adjust the settings.
 ATW – Select Automatic Tracking
White Balance (ATW) to
automatically adjust the white
balance color temperature range
from 3,200°K~9,200°K when the
image color temperature changes.
BLC ON
BLC OFF

4-in-1 HD TVI, CVI, AHD Analog Cameras
6 SECO-LARM U.S.A., Inc.
Auto White Balance (AWB) (Continued)
 MANUAL – Select MANUAL to
manually adjust the blue and red color
temperature values for the area.
o RED – Set the red gain value.
Adjust from 0~63 (Default: 40).
o BLUE – Set the blue gain value.
Adjust from 0~63 (Default: 10).
 GRAY WORLD – This function adjusts
the white balance to gray rather than white resulting in better exposure based on the
environment.
 RETURN: Return to the MAIN MENU screen.
Day and Night
This function is used to adjust the transition between color and black & white modes automatically
based on the current lighting conditions.
1. Select DAY & NIGHT on the Main Menu screen.
2. Select the desired Day & Night operation.
3. Adjust the settings.
 EXT – Selected External (EXT) mode to automatically adjust between Color and B/W modes
by using the integrated IR CDS sensor.
 B/W – Select B/W to force the camera to always display in B/W mode.
 COLOR – Select COLOR to force the camera to always display in color mode.
 RETURN – Return to the MAIN MENU screen.
NOTE: If DAY & NIGHT is set to B/W then WHITE BAL is not available.
Image Enhance
This function accesses the video image to enhance functions such as sharpness, contrast,
saturation, and DNR.
1. Select Image Enhance (IE) on the Main Menu screen.
2. Select the desired menu operation.
3. Adjust the settings.

4-in-1 HD TVI, CVI, AHD Analog Cameras
SECO-LARM U.S.A., Inc. 7
Image Enhance (Continued)
 CONTRAST – Adjust the difference
between the lightest and darkest parts of an
image or video stream.
o LEVEL – Higher values will result in
increased difference of light and dark.
Adjust from 0~16 (Default: 5). AUTO,
Manual: 0~20 (Default: 10).
 SHARPNESS – Adjust to increase the
contrast of edges in a video or image.
o LEVEL – Higher values will result in
increased edge contrast detection. Adjust
from 0~16 (Default: 5). AUTO, Manual:
0~20 (Default: 8).
 SATURATE: This function is used to
increase or decrease the amount of color hue
within the frame.
o AUTO – Automatically adjusts color
saturation.
o MANUAL – Select the desired setting.
o LEVEL – Adjust from 0~20 (Default 10).
 2DNR – Select the 2D Digital Noise
Reduction (2DNR) for general lighting
conditions. Higher levels of DNR will
decrease the noise in the image but also
potentially affect the sharpness.
o AUTO
o LEVEL – Adjust from 0~20 (Default 0).
 3DNR – Select the 3D Digital Noise
Reduction (3DNR) for low lighting conditions.
Higher levels of DNR will decrease the noise
in the image but also potentially increase
after images.
o AUTO
o LEVEL – Adjust from 0~20 (Default 0).
 RETURN – Return to the MAIN MENU
screen.
DNR ON
DNR OFF

4-in-1 HD TVI, CVI, AHD Analog Cameras
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local l
aws and
statutes related to monitoring and recording audio and video signals. SECO-LARM
will not be held responsible for the use of this product in
violation of any current laws or statutes.
FCC COMPLIANCE STATEMENT
:
Information to the user: This equipment has been tested and found to
comply with the limits for a class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a
commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a reside
ntial area is likely
to cause harmful interference in which case the user will be required to correct the interference at his or her own expense.
WARRANTY:
This SECO
-
LARM product is warranted against defects in material and workmanship while used in normal service for three (3)
years from the date of sale to the original customer. SECO-
LARM’s obligation is limited to the repair or replacement of any defective part if the
unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attrib
uted to acts of God, physical or
electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any
other reason
SECO-LARM determines that such equipment is not operating properly as a result of cau
ses other than defects in material and workmanship.
The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-
LARM’s
option. In no event shall SECO-LARM be liable for any special, col
lateral, incidental, or consequential personal or property damage of any kind
to the purchaser or anyone else.
NOTICE:
The SECO
-
LARM policy is one of continual development and improvement. For that reason, SECO
-
LARM reserves the right to change
specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A.,
Inc.
or their respective owners. Copyright © 2023 SECO-LARM U.S.A., Inc. All rights reserved.
Video Output
This function is used to change the Video Output and Video Standards. Select VIDEO OUTPUT on
the Main Menu screen.
 HD:
o TVI – 1080p/25/30 FPS
o CVBS – NTSC, PAL
o AHD – 1080p/25/30 FPS
o CVI – 1080p/25/30 FPS
 RETURN – Return to the MAIN
MENU screen.
Exit
This function is used to save all OSD changes and exit the menu screen, reset all values to their
factory defaults, or exit the menu screen without saving any changes.
1. Select EXIT on the Main Menu screen.
2. Select the desired operation.
 RESET – Restore all OSD settings to factory defaults and exit the OSD menu.
 SAVE & END – Save all OSD changes and exit the OSD menu.
 EXIT – Exit the OSD menu without saving any changes.
SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website:
www.seco
-
larm.com
Phone: [phone] | [phone] Email: [e-mail]
PICRN3
MI_EV
-
Y2251
-
AxWQ_OSD_230411.docx