Enginko MCF-LW12MET User manual

2022/09/11 21:53 1/2 Manual MCF-LW12MET
e n g i n k o . s u p p o r t . c e n t e r - https://www.enginko.com/support/
Table of Contents
Manual MCF-LW12MET 1 ....................................................................................................................
1. Description 1 ................................................................................................................................
2. Connection of the device 1 ..........................................................................................................
Ordering Codes 2 .............................................................................................................................

Last update: 2021/03/05
06:23 manual_mcf-lw12met https://www.enginko.com/support/doku.php?id=manual_mcf-lw12met&rev=1614921792
https://www.enginko.com/support/ Printed on 2022/09/11 21:53

2022/09/11 21:53 1/2 Manual MCF-LW12MET
e n g i n k o . s u p p o r t . c e n t e r - https://www.enginko.com/support/
Manual MCF-LW12MET
1. Description
MCF-LW12MET is a LoRaWAN™ metering that allows instantaneous reading of active, reactive and
apparent power, voltage and current up to 230Vac - 16Amp (active, reactive and apparent energy,
Class 0.2). It can switch ON and OFF a 230 Vac - 8A load and reads the status of a 230 Vac input.
2. Connection of the device
If correctly configured, when the device is powered by terminals L LINE and N LINE, it connects to the
LoRaWAN™ network. The connection status is visible on the red/green led.

Last update: 2021/03/05
06:23 manual_mcf-lw12met https://www.enginko.com/support/doku.php?id=manual_mcf-lw12met&rev=1614921792
https://www.enginko.com/support/ Printed on 2022/09/11 21:53
Please refer to following connections:
Name Description
L LINE Device power: 230V Live N LINE Device power: 230V Neutral L LOAD 230V Live to Load N LOAD
230V Neutral to Load L IN Input monitor: 230V Live N IN Input monitor: 230V Neutral C Terminal for
Common contact NC Terminal for Normally Close contact NO Terminal for Normally Open contact
Ordering Codes
From:
https://www.enginko.com/support/ - e n g i n k o . s u p p o r t . c e n t e r
Permanent link:
https://www.enginko.com/support/doku.php?id=manual_mcf-lw12met&rev=1614921792
Last update: 2021/03/05 06:23