ENHANCED VISION Max Series User manual

The MaxTM Family
Users Manual
Max Max Panel
TM TM

User GUide
Congratulations on your purchase of one of the Max family of prod-
ucts. Enhanced Vision products are designed to give you the highest
quality and convenience available.
Max products use the latest advances in video and display technol-
ogy to provide you with a portable system that addresses the need for
magnification of text, pictures, and much more.
Max products consist of an auto focus camera, which captures and
projects images on to either a TV, a pair of Enhanced Vision LCD
glasses, a LCD flat screen, a computer monitor or laptop computer
(additional hardware may be required). Images can be switched be-
tween true color, black & white, high contrast positive or nega-tive.
The camera has been designed so either a right or left-handed user
would be able to use it very effectively, with a minimum amount of
practice and/or training.
Prior to using this system, please carefully read and follow the instruc-
tions provided within this booklet. A thorough understanding of the
functionality will allow you to fully benefit from the flexibility and
great features of this device.
If you have any questions, please contact the eyecare professional or
the supplier from whom you have acquired the unit.
FCC ComplianCe notiCe
FCC Compliance Notication
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modication to this system can void the us-
er’s authority to operate this equipment.
If your Low Vision device has an option to connect to a TV, it must be
used with shielded interface cables in order to meet FCC emissions
limits for Class B digital devices. It is the responsibility of the user to
use the shielded interface cables supplied with the equipment.
FCC COMPLIANCE NOTICE

4
table oFContents
Important Safety Precautions............................................... 4
Max...................................................................................... 6
Max Package Contents & Controls ................................ 7
Max Installation ............................................................. 9
Using Max ..................................................................... 11
Max Panel............................................................................. 15
Max Panel Package Contents & Controls ...................... 16
Using Max Panel ........................................................... 18
Using LCD Power Pack.................................................. 20
Common Questions.............................................................. 23
Max .............................................................................. 23-24
Max Panel...................................................................... 25
General.......................................................................... 26
Warranty Statement............................................................. 27
Other Enhanced Vision Products......................................... 28
Contact Information............................................................. 30
important saFety preCaUtions
SYSTEM WARNINGS
The Max family of products are designed to improve the quality of
life for visually impaired individuals. The extent to which Max prod-
ucts can improve the ability to see images depends on an individu-
al’s condition and level of visual impairment. These products are not
designed to restore vision, correct eye conditions or halt degenera-
tive vision loss. An eyecare professional can determine the suitabili-
ty of Max products for a patient’s condition.
SYSTEM PRECAUTIONS
Avoid exposing Max products to extreme or rapid changes in
temperature or humidity as these conditions may cause fogging
or damage to products. Max products should never be placed
near a radiator or heat register.
Do not smoke while using Max products. Cigarette, cigar and
pipe smoke release abrasive particles which are potentially dam-
aging to the Max optics.
Do not use this product near water, i.e., near a bathtub, kitchen
sink, swimming pool, etc.
Do not place this product on an unstable cart, stand or table, as
the product may fall, causing serious damage.
To obtain the maximum benefits from your Max product, please read
these safety precautions carefully.
IMPORTANT SAFETY PRECAUTIONS

56
maximportant saFety preCaUtions
Always place the excess cord in an area where it will not be
damaged by a person walking on it.
To avoid the risk of electrical shock, do not disassemble this
product. Return it to the place of purchase if service or repair
work is required. Any attempt to disassemble your Max prod-
uct will void the warranty.
Always use the power supply provided within your package.
Do not attempt to use any other power supply, doing so will
void the warranty.
CARING FOR MAX PRODUCTS
Always turn the power OFF when you are not using the system.
Make sure the power is OFF or unplug your Max product from
the wall outlet before cleaning. Do not use liquid cleaners.
The plastic surfaces of your Max product may be dusted with a
dry cloth.
The optical surfaces should be cleaned as needed for best per
formance. Dampen a lens cleaning tissue with a small amount
of lens cleaning solution and gently wipe the optical surfaces
clean.
Never apply lens cleaning solution directly on any surface of
your Max products.
MaxTM

8
7max paCkaGe Contents & Controlsmax paCkaGe Contents & Controls
Your Max includes all required accessories for operation with any
TV.
1. Max Digital Magnifier (Color or Black & White): captures and
enlarges the image.
2. Control Box: connects the camera to the TV set and turns Max
ON/OFF.
3. Viewing Mode Button: for switching between color, black &
white, high contrast positive or high contrast negative screen
images.
4. Magnification Dial: increases size when turned clockwise.
5. 6 Foot RCA Video Cable: connects Max control box to the TV via
the “Video Input” jack.
6. Power Supply: connects Max control box to an outlet.
Additional Accessories (not included):
7. MaxTrak: keeps your Max rolling in a straight line across a
page.
8. Max Writing Stand: used for limited writing - signing a check or
completing a form.
2 1
4
3
5 6
7
8
Video
Power
Camera
Additional Accessories (not included):
ON
OFF
MAX PACKAGE CONTENTS & CONTROLS

10
9max installationmax installation
Basic TV Connection Using the RCA Video Cable and “Video Input”
Jack (Refer to Figure 1)
1. Remove Max and the Control Box from the package.
2. Remove the RCA Video Cable from the package. Plug one end of
the RCA Video Cable into the Control Box Jack abeled “VIDEO.”
3. Plug the other end of the RCA Video Cable into the yellow “VIDEO
INPUT” jack of your TV. This jack could be located on either the
front or back of your TV.
4. Remove the Power Supply from the package. Plug one end of the
Power Supply into the Control Box Jack labeled “POWER.” Be
sure the plug is fully inserted into the Control Box. Then plug in
the other end of the Power Supply into an outlet.
5. Turn the power on. The ON and OFF switch is on the side of the
control box. Turn the TV ON.
You can switch between using Max and your TV with the TV re-
mote control by changing between “Video” and “TV” mode.
If you have a TV with a built in VCR, you can switch between us-
ing Max and your TV by pushing the “Input” button on your re-
mote.
Now you can go to the Using Max section on page 11 for informa-
tion on how to use Max.
POWER
CHANNEL
VIDEO
ON
OFF
FIGURE 1
VIDEO IN on
Back or Front
of TV.
RCA
Video
Cable
Power Supply
Plugs to Outlet
Control Box
Max
MAX INSTALLATION

12
11 UsinG maxUsinG max
Adjusting The Magnification
Your Max has been preset at its
lowest level of magnification. To
increase the magnification level,
simply turn the large black dial on
top of the Max clockwise, a quarter
of a turn (1/4) from 12 o’clock to 3
o’clock (See Figure 1 ). The 12
o’clock position is the lowest level
of magnification and the 3 o’clock
position is the highest level of mag-
nification.
NOTE: THE MAGNIFICATION
DIAL ONLY TURNS BETWEEN 12
O’CLOCK AND 3 O’CLOCK. DO
NOT FORCE THE DIAL BEYOND
THE 3 O’CLOCK POSITION.
Now that you have successfully installed your Max you can enjoy
its ease of use and operation. Max can be used to magnify material
on any curved or straight surface. Simply place the Max on the item
that you need to be magnified and slowly slide the unit across or up
and down as desired.
12
3
Figure 1
SELECT A VIEWING OPTION
You can choose a viewing option by
pushing the black button on the top of
the digital magnifier. Each push will
change your viewing option. If you
keep pushing the button you will cycle
through all the options. (See Figure 2)
There are different viewing options de-
pending on the Max model you have
purchased.
Viewing Options For Black & White Max
Soft-Contrast Positive Image (B&W): This is
a soft white back ground and a soft black
foreground for text. Useful for viewing il-
lustrations, photographs, or text.
High-Contrast Positive Image (B&W): This
is a high-contrast white background and
a high-contrast black foreground for text.
Useful for reading text.
High-Contrast Negative Image (B&W): This
is a high-contrast black background and
a high-contrast white foreground for text.
Useful for reading text.
Viewing Options for Color Max
The color Max has all the viewing options
of the B&W model plus Full Color Image.
Full Color Image: This is especially useful
for viewing newspaper or magazines with
color illustrations or photographs.
Reading is easy
with Max.
Reading is easy
with Max.
Reading is easy
with Max.
Figure 2
USING MAX

14
13 UsinG maxUsinG max
Using MaxTrak (Accessory not included)
When you need the extra support to guide
your reading across a page you can attach
the MaxTrak to the Max. MaxTrak allows
you to follow a straight line easier.
Start by placing MaxTrak on your table
with the wheels touching the table sur-
face. The small end of MaxTrak should be
closest to you. If this is done correctly, you
can roll MaxTrak easily from left to right
and back again. Then place the Max on
top of MaxTrak and slip it into place.
Reading with Max
If you are using Max for reading purposes, place the Max on the text
so the first line is located approximately in the middle of your TV
screen. Slide the Max across, left to right, over the first line. Once
completed, slide the Max back to the beginning of the line, and then
slide it down to the next line.
Practice the motion of moving Max on a straight line by keeping the
palm of your hand on the table and holding Max in your hand. Re-
peat this exercise several times with different printed material varied
in col-umn width and length. As you learn to move Max in a straight
line and as you gain more control over the unit, it will become easier
to use.
We highly recommend purchasing the MaxTrak if you are reading for
extended periods of time. MaxTrak is designed to attach to your Max
and help guide you in a straight line. Please read the section below
“Using MaxTrak”.
For better image quality,
the Max must sit all the
way down into MaxTrak.
To use MaxTrak, slowly glide straight across
a page from left to right. When you have
reached the end of a line, glide back from
right to left to the beginning of the line.
Then lift Maxtrak and slightly move it down
to continue reading. When you need more
flexibility in movement, remove MaxTrak
from the magnifier.
Using Max Writing Stand (Accessory not
included)
Place the Max on top of the Max Writing
Stand so that the camera cable is facing away
from you. If you have inserted it cor-rectly,
the Max should fit perfectly in the Max Writ-
ing Stand.
Move the Max on top of your desired object
that you would like to sign or write on.
With your non-writing hand, tilt the Max
Writing Stand to the LEFT if you are RIGHT
handed and to the RIGHT if you are LEFT
handed.
For the best focus, turn Max to the highest
level of magnification by rotating the dial
from 12 o’clock to 3 o’clock. See Adjusting
the Magnification on page 11.
It is best to use Color or Black & White view-
ing modes when using the writing stand.
Viewing Options Button
Magnification Dial
12 3

16
15 max panel paCkaGe Contents & Controlsmax panel
Max PanelTM
Your Max Panel is packaged in a soft case that is convenient for
storage and transportation. All required accessories for operation
are included.
Max Panel is comprised of:
1. LCD Screen.
2. LCD Power Pack.
3. Rechargeable Battery: energy source for 3 to 5 hours.
4. On/Off Switch for LCD Power Pack.
5. Max Digital Magnifier (Color or Black & White): captures and en-
large the image.
6. Viewing Options Button: changes viewing options from color,
black & white, high contrast positive and high contrast nega-
tive, depending on Max camera purchased.
7. Magnification Dial: increases size when turned clockwise.
Accessories included:
8. Power Supply: connects to LCD Power Pack and power cord.
9. Power Cord: connects to power supply and wall outlet.
10. 6-foot RCA Video Cable: connects LCD Power Pack to a TV.
11. Lens Cloth: used to clean the Max camera and LCD screen.
12. Soft Backpack.
13. MaxTrak: keeps your Max rolling in a straight line across a page.
14. Max Writing Stand: used for limited writing - signing a check or
completing a form.
MAX PANEL PACKAGE CONTENTS & CONTROLS

18
17 UsinG max panelmax panel paCkaGe Contents & Controls
6
7
5
2
3
1
8
9
10 11
4
12 13 14
Figure 2
1. Turning the power ON
On the right side of the LCD Power Pack
flip the switch from 0 to l. (See Figure 1)
The LCD screen and Max camera will au-
tomatically turn on in a few seconds.
An image of what the camera is on top of
should appear on the LCD screen.
Turn the power off by flipping the same
switch back to the 0 position. However,
leave the power on for this training section.
Note: If the battery is charged, there is no need to plug in the power
supply and cord. If the battery is not charged, then refer to “Recharg-
ing the Battery” section on page 22.
Figure 3 Figure 4
2. Adjusting the LCD screen
It is important to orient the LCD screen to provide the best viewing
angle. To lift the screen put one hand on the back of the base and the
other hand one the LCD and pull forward (see Figure 2-3). Once in
the upright position use both hands to adjust vertically (see Figure 4).
Figure 1
USING MAX PANEL