Merlin LCD/Plus enables individuals with low vision to read, write,
view photos, enjoy crafts and hobbies, and more – in color, black-
and-white, or enhanced high-contrast positive or negative viewing
modes. Merlin LCD/Plus also includes 3 different preset color
combinations for both text and background to provide improved
viewing when reading. An additional 25 color combinations are
available and can be programmed. With easy-to-use buttons that
are also distinguishable by touch, you can enlarge or reduce the
image in seconds, change viewing modes for easier visibility. The
auto focus feature on Merlin LCD/Plus makes it simple to use and
allows optimum convenience for most daily activities. Computer
compatibility and split-screen compatibility (Merlin Plus version
only) round out the set of features for maximum efficiency.
Please read this booklet and familiarize yourself with Merlin LCD/
Plus features and operation before using this system. Your Merlin
LCD/Plus is ready to use right out of the box. By reviewing Merlin
LCD/Plus features and controls before using it and following the
directions carefully, you’ll be able to enjoy all the great benefits
from your purchase.
Enhanced Vision products are designed to give you the highest
quality image, convenient and easy-to-use features and years of
reliable service. Thank you for choosing the Enhanced Vision
Merlin LCD/Plus.
Congratulations on your purchase of Merlin LCD/Plus from
Enhanced Vision. Merlin LCD/Plus is a full-color, auto-focus video
magnifier system designed to enhance the lifestyle of the visually
impaired. With the LCD monitor’s adjustable arm, Merlin LCD/Plus
can provide the user with the ultimate flexibility in the positioning of
the screen.
FCC ComplianCe notiCe
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modication to this system can void the
user’s authority to operate this equipment.
If your Low Vision device has an option to connect to a TV, it must be
used with shielded interface cables in order to meet FCC emissions limits
for Class B digital devices. It is the responsibility of the user to use the
shielded interface cables supplied with the equipment.
