Epson Stylus Photo RX600 User manual

CPD-17417R1
4049801-00
XXX

Here’s How To . . .
■Make a quick letter-size copy (page 1)
■Print an exact duplicate of a
4 ×6-inch photo (page 5)
■Print photos from your camera’s
memory card (page 10)
■Print photos from 35 mm film
or slides (page 15)
And you can do all these things with your Epson Stylus®Photo
RX600 without using your computer!
There’s much more you can do with your RX600. See some examples
on page 24.
To set up and connect your RX600, see the Start Here sheet.
For detailed instructions on using the RX600, see your User’s Guide.

1
Making a Quick Letter-Size Copy
The default settings on the RX600 screen make it quick and easy to
copy a letter-size document on plain paper. Here’s how:
Loading Paper
1Press the POn button to turn on the RX600.
2Open the output tray.
3Flip the feeder guard forward.
Output tray
Feeder
guard

2
4Insert a sheet of 8.5 ×11-inch plain paper—short edge first—
against the right edge of the sheet feeder and under the tabs on
the edge guides.
5Press the sides of the left edge guide together and slide it against
the paper (but not too tightly).
6Flip the feeder guard back over the paper.

3
Placing Your Document
1Open the scanner lid.
2Place your document face-down on the glass, in the upper left
corner. Move your document about 1/10 inch from the top and
side edge so your entire document is scanned.
0.1 in
0.1 in
Move the document
in about 1/10 inch
from the edges

4
3Close the scanner lid.
Copying Your Document
1Press the Copy button to access the Copy Menu.
2Press the xColor button to make a color copy or press the
xB&W button to make a black and white copy.
Note: To cancel copying, press the yStop button. Canceling appears on
the RX600 screen.
Copy
button

5
Printing a Duplicate of a Photo
You can print an exact duplicate of a 4 ×6-inch photo on Epson
photo paper. In this example, you’ll select Epson Premium Glossy
Photo Paper.
Loading Paper
1Press the POn button to turn on the RX600.
2Open the output tray.
3Flip the feeder guard forward.
Output tray
Feeder
guard

6
4Insert a few sheets of 4 ×6-inch Premium Glossy Photo Paper—
short edge first and shiny side up—against the right edge of the
sheet feeder, under the tab.
5Press the sides of the left edge guide together and slide it against
the paper (but not too tightly). Make sure the paper is under the
tab on the left edge guide.
6Flip the feeder guard back over the paper.

7
Placing Your Photo
1Open the scanner lid.
2Place your 4 ×6-inch photo face-down on the glass, in the upper
left corner. Move your photo about 1/10 inch from the top and
side edge so your entire photo is scanned.
0.1 in
0.1 in
Movethephoto
in about 1/10 inch
from the edges

8
3Close the scanner lid.
Printing Your Duplicate Photo
1Press the Copy button to access the Copy Menu.
2Press the Menu button to change the Copy Layout setting.
3Press the uor dbutton to choose Copy Layout, then press the
lor rbutton to change the setting to BorderFree.
®
Copy
button
Menu
button

9
4Press the OK button.
5Select the following settings:
■Copies: choose the number of
prints you want
■Reduce/Enlarge: choose
AutoFitPage
■Zoom In/Out: leave this setting blank (if it is accidently
changed, reset the Reduce/Enlarge setting to AutoFitPage)
■Paper Type: choose Prem.Glossy
■Paper Size: choose 4x6in.
■Quality: choose BestPhoto
Press the uor dbutton to choose an option, then press the
lor rbutton to change settings.
Before you print, make sure the RX600 screen looks like this:
6Press the xColor button to make color prints or press the
xB&W button to make black and white prints.
Note: To cancel copying, press the yStop button. Canceling appears on
the RX600 screen.
OK button
BorderFree
AutoFitPage
Paper type
and size, and
print quality

10
Printing Photos from a Memory Card
You can view photos on your memory card and print them on
4 ×6-inch Epson photo paper. In this example, you’ll select Epson
Premium Glossy Photo Paper.
Loading Paper
1Press the POn button to turn on the RX600.
2Open the output tray.
3Flip the feeder guard forward.
Output tray
Feeder
guard

11
4Insert a few sheets of 4 ×6-inch Premium Glossy Photo Paper—
short edge first and shiny side up—against the right edge of the
sheet feeder, under the tab.
5Press the sides of the left edge guide together and slide it against
the paper (but not too tightly). Make sure the paper is under the
tab on the left edge guide.
6Flip the feeder guard back over the paper.

12
Inserting Your Memory Card
1Press the Memory Card button to access the Memory Card
menu.
2Open the memory card slot cover.
Memory
Card button

13
3Insert your memory card into the correct slot. Be careful not to
force it in (it won’t go in all the way).
Note:
Do not insert more than one card.
4The memory card light flashes, then turns green. Close the cover.
If the light doesn’t turn green, or if you see the message
No memory card. Operation Canceled on the RX600 screen,
the card may be inserted incorrectly or may not be supported.
Note:
To remove the card, first make sure your RX600 is not printing and the
memory card light is not flashing. Then open the memory card slot
cover and pull the card straight out of the slot.
CompactFlash™or
Microdrive™(bottom) Memory Stick® (middle) SD or MMC (middle)
SmartMedia™
(top) xD (top)
Memory card light

14
Viewing and Printing Your Photos
1Press the uor dbutton to choose Basic Print 4 x 6", then press
the lor rbutton to choose Select Print.
2Press the OK button. The RX600 screen displays the first, second,
and last photo on the card.
3Press the lor rbutton to move through the photos.
4When the photo you want to print is in the middle of the screen,
press the uor dbutton to choose the number of copies to print
of that photo.
5Press the xColor button to print a color photo. (You can’t print
in black and white from this mode.)
Note:
To cancel printing, press the yStop button. Canceling appears on the
RX600 screen. To print an Index Sheet (also called a proof or contact
sheet) with small thumbnails of all your photos, see your User’s Guide.
Last First Second

15
Printing a Photo from Film or a Slide
You can print a 4 ×6-inch photo from a 35 mm film negative or a
slide. (For additional details on film printing, see your User’s Guide.)
Before you start, make sure the cable is connected to the TPU
(transparency unit) connector. (If it is not connected, turn off the
RX600, connect the cable, then turn the RX600 back on.)
Loading Paper
1Press the POn button to turn on the RX600.
2Open the output tray.
Output tray

16
3Flip the feeder guard forward.
4Insert a few sheets of 4 ×6-inch Premium Glossy Photo Paper—
short edge first and shiny side up—against the right edge of the
sheet feeder, under the tab.
5Press the sides of the left edge guide together and slide it against
the paper (but not too tightly). Make sure the paper is under the
tab on the left edge guide.
Feeder
guard

17
6Flip the feeder guard back over the paper.
Removing the Film Holder
1Open the scanner lid.

18
2Remove the document mat from the scanner lid by pulling the
handle to the left.
3Carefully lift the film holder out of the scanner lid by pulling it
straight up.
4Continue with one of these sections:
■“Loading a Filmstrip” on page 19
■“Placing a Slide” on page 20